MCH205 Electrical Circuits 2, Elec. & Electronics Dept.
, Faculty of Technology & Education- Suez University
Electrical Circuits 2
Assignment # 4
1-For the circuit in Fig.1, find:
(a) i(o+) and v(o+),
(b) di (o+) / dt and dv(o+) / dt,
(c) i(∞) and v(∞). Figure 1-problem-1
2-Refer to the circuit shown in Fig.2. Calculate:
(a) iL(o+) and vC (o+), and vR (o+),
(b) diL (o+) / dt and dvC (o+) / dt, and dvR (o+) / dt,
(c) iL(∞) and vC(∞).and vR(∞).
Figure 2-problem-2
3- Refer to the circuit shown in Fig.3. Determine:
(a) i(o+) and v(o+),
(b) di (o+) / dt and dv(o+) / dt,
(c) i(∞) and v(∞).
Figure 3-problem-3
4 -In the circuit of Fig. 4, find:
(a) vR (o+), and vL (o+),
(b) dvR(o+) / dt, and dvL(o+) / dt,
(c) vR(∞).and vL(∞).
Figure 4-Problem-4
5-A series RLC circuit has R=20KΩ, L=0.2mH , and C=5μF. What type of
damping is exhibited by the circuit?
6- The current in an RLC circuit is described by
If i(o)= 10A and di (o) / dt= 0 find for i(t) for t >0.
7- If R=50KΩ, L=1.5H , what value of C will make
an RLC series circuit:
(a) overdamped,
(b) critically damped,
(c) underdamped?
8- For the circuit in Fig. 5, calculate the value of R
needed to have a critically damped response.
Figure 5-problem-8
9- The switch in Fig. 6 moves from position A to position B at t=0 (please note that the
switch must connect to point B before it breaks the connection at
A, a make-before-break switch). Let v(0) = 0, find v(t) for t.> 0.
Figure 6-problem-9
10- The switch in the circuit of Fig. 7 has been closed
for a long time but is opened at Determine
i(t) for t >0.
Figure 7-problem-10
11-Assuming design a parallel RLC circuithat has the characteristic equation.
12-For the network in Fig. 8, what value of C is needed to make the response
underdamped with unity damping factor (α=1 )?
Figure 8-problem-12
13-The switch in Fig. 9 moves from position A to position B at t= 0 (please note that
the switch must connect to point B before it breaks the connection at A, a make-
before-break switch). Determine i(t) for t >0.
Figure 9-problem -13
14-The step response of an RLC circuit is given by
Given that i(o)= 2A and di (o) / dt= 4 ,solve for i(t).
15- A series RLC circuit is described by
16-The step responses of a series RLC circuit are
(a) Find C. (b) Determine what type of damping is
exhibited by the circuit.
17-Calculate i(t)for t >0 in the circuit of Fig.10
Figure 10-problem -17
18-Obtaini(t) and v(t)for in the circuit of Fig. 11.
Figure 11-problem-18
19-Determine v(t) for t >0 in the circuit of Fig. 12.
Figure12 -problem-19
20-In the circuit of Fig. 13, find i(t)and v(t) for t >0 Assume and v(0) = 0 V and
i(0) =1 A.
Figure 13-problem-20
21-Find the output voltage vo(t) in the circuit of Fig. 14.
Figure 14-problem-21
22-Determine i(t) for t >0 in the circuit of Fig. 15.
Figure 15-problem -22
23- Find v(t) for t >0 in the circuit of Fig. 16.
Figure 16-problem - 23
24- If the switch in Fig. 17 has been closed for a long time before t = 0 but is opened
at determine:
(a) the characteristic equation of the circuit,
(b) ix and vR for t > 0.
Figure 17-problem-24
25- In the circuit of Fig. 18, the switch has been in position 1 for a long time but
moved to position 2 at t =0 Find:
(a) v(0+), dv(0+)dt,
(b) for v(t) t > 0.
Figure 18-problem-25
