Scribd
Upload
50 views44 pages

PLZ152W E4

Uploaded by

Asad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views44 pages

PLZ152W E4

Uploaded by

Asad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 44

ELECTRONIC LOAD

PLZ152W
INSTRUCTION MANUAL

Part No. Z1-707-320, IB001034


All or any parts of this manual may not be reproduced in any forms, without express written
permission of Kikusui Electronics Corporation.

The contents of this manual, including the specifications of the instrument, are subject to change
without notice.

©1990-2009 Copyright Kikusui Electronics Corporation.


All rights reserved.
Power Requirements of this Product

Power requirements of this product have been changed and the relevant sections of the Operation
Manual should be revised accordingly.
(Revision should be applied to items indicated by a check mark )

Input voltage
The input voltage of this product is Vac,
and the voltage range is to Vac. Use the product within this range only.

Input fuse
The rating of this product's input fuse is A, Vac, and .

WARNING Possible electric shock.


• Before attempting to check or replace the fuse, be sure to turn the
POWER switch off and removing the plug of power cord from an
outlet or turn off the circuit breaker of switchboard.
• Use a fuse element having a shape, rating, and characteristics
suitable for this product.

Power cord
The product is porvided with power cords described below. If the power cord has no plug, attach a
plug or crimp-style terminals to the power cord in accordance with the wire colors specified in the
drawing.

WARNING The attachment of a plug of power cord or crimp-style terminals must


be carried out by qualified personnel.

Without a plug Without a plug


Blue (NEUTRAL ) White (NEUTRAL)

Brown (LIVE) Black (LIVE)

Green/Yellow (GND) Green or Green/Yellow (GND)

Plug for USA Plug for Europe Plug for China

Provided by Kikusui distributor/agent


Kikusui agents can provide you with suitable power cord.
For further information, contact Kikusui distributor/agent.

© 1998-2008 Kikusui Electronics Corporation Kikusui Part No. Z9-000-027 IB001683


Request to Users

This products must be used only by qualified personnel who understand the contents of this
operation manual. If it is handled by disqualified personnels, electrical hazards may result. Be
sure to handle it under supervision of qualified personnel (those who have electrical
knowledge).
If any abnormality or failure was detected in the products, stop using it immediately and
contact your Kikusui distributor or agent.

Installation
• Be sure the environmental condition where the products to be installed meets all
requirements listed in the operation manual.
• To prevent electric shock, connect the ground terminal to electrical ground (safety ground).
• Connect the product to the specified AC power source with the AC power cable provided.
• For output wiring or load cables, use connection cables with larger current capacity.

Maintenance and inspection


• To prevent electric shock, be absolutely sure to unplug or stop applying power before
performing maintenance or inspection.
• Make sure the AC input voltage setting and the fuse ratings are satisfied and that there is no
abnormality in the AC power cable.
• Do not remove the cover when performing maintenance or inspection. There are parts
inside the product which may cause physical hazards. Consult your Kikusui distributor or
agent before uncover the products in case if it is so necessary.
• To maintain performance and safe operation of the product, it is recommend to conduct a
periodic maintenance, inspection, cleaning, and calibration.

Relocation
• Disconnect all cables when relocate the product.
• Use two or more persons when relocate the product which weights more than 20 kg. The
weight of the products can be found in this operation manual.
• Be careful of harming protruded parts of the products such as output terminals, terminal
boards or heatsinks when moving.
• Use extra precautions such as using more people when relocating into or out of present
locations including inclines or steps. Also handle carefully when relocating tall products as
they can fall over easily.
• Be sure the operation manual are included whenever the product is moved, relocated or
possession is passed to another party.
ELECTRONIC LOAD PLZ152W INSTRUCTION MANUAL

You might also like