Scribd
Upload
87 views2 pages

01. Base Plate Design

Uploaded by

manojh.jaiswal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views2 pages

01. Base Plate Design

Uploaded by

manojh.jaiswal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN SHEET 1 of 2

JOB No. Rev. No. 0


DQ.No. Date
CLIENT Designed By
DESCRIPTION FIXED BASE FOR MAIN COLUMN Checked By
DESIGN OF FIXED BASE CONNECTION FOR ALL COLUMNS FOR BLDG-B

INPUT DL+LL DL+WL Mark: Detail - A


Bending Moment Kn.m 22.00 21.00
Shear Force (Fx) Kn 8.00 22.00
Axial Force (Fy) Kn 24.00 26.00 DL : DEAD LOAD
Web Depth mm 200 LL : LIVE LOAD
Flange Depth mm 113 WL : WIND LOAD
Bolts Dia mm 16
Embed length (Le) mm 450
Plate Thickness (t) mm 12
Pitch (p) mm 100
guage (g) mm 100
No. COLS ALONG LEN 1 SIDE 1
No. Of Bolts ALONG WIDTH : 4
No. Of Bolts (n) 8 DON’T ENTER VALUE
WEB DEPTH : 200 mm
PLATE LENGTH : 300 mm
PLATE WIDTH : 300 mm
CHECK SPACING : 200 SAFE
GRADE OF CONCRET : 20 N/mm^2

Distance of the extreme Tension Fiber(L) : 200 mm

Effective Lever arm :


: 200 mm
Total Tension in each extreme Bolts ( T ) : Maximum moment / Eff. Lever arm
: 22 / 0.2
: 110.00 Kn
CHECK FOR BOLT SIZE

FORCES IN THE BOLTS Actual Allowable


(Kn) (Kn)
Max. Tension in each Bolt : 13.75

Tension due to Axial Force ( Fy/n )UPLIFT : 3.25

Total Tension ( P= T/4+Fy/n) : 17.00 20.80 HENCE SAFE

Shear in each Bolt ( Fx/n) : 2.75 13.60 HENCE SAFE

CHECK FOR THICKNESS OF PLATE


P
Maximum bending moment in the plate(Ma) P :x g/ 4
( About criticle section X-X) : 17 x 100/4
: 0.43 Kn-M G
100
Thickness of plate required ( t ) : 6 x Ma / f x p

: 11.99 < 12 ΜΜ HENCE SAFE

CHECK FOR COMBINED TENSION AND SHEAR

Actual Tension + Actual Shear < 1. 4


Allowable Tension Allowable Shear

(17 / 20.8)+(2.75 / 13.6) = 1.02 < 1.4 HENCE SAFE

Designed by SSR
DESIGN SHEET 2 of 2

JOB No. Rev. No. 0


DQ.No. Date
CLIENT Designed By
DESCRIPTION FIXED BASE FOR MAIN COLUMN Checked By

CHECK FOR BOLT LENGTH

2
Bond Stre gra. OF Cocrete M 20 : 0.80 N/mm

Length of bolt required : Tension in bolt/(π x bolt Dia.)x Bond stress


: 17 ∗1000/(π∗ 16)∗0.8
: 423 mm HENCE SAFE

CHECK FOR BASE PLATE SIZE

2
Area of Base Plate (A) : 300x300 = 90000 mm
2
Pres. On concrete pedestal (P/A+M/Z) DL+LL : 4.9 N/mm

Pres on concrete pedestal (P/A+M/Z) DL+WL : 3.7

2
Allowable pressure below the base plate : 5.0 N/mm

Allowable pressure > Actual pressure HENCE SAFE

888 HENCE PROVIDE : 12 mm Thick Plate/ 8 No.s 16 mm Dia Anchor Bolts.

Designed by SSR

You might also like