8 7 6 5 4 3 2 1

A 11-00590 ORIGINAL RELEASE 2011DEC28 DL.WANG R.WANG

25
24

D D

29

18
26

31
23
C 17 C
33

32

33 FILTER BREATHER (MOTOR SEAL SCAVENGE)

15 32 CHECK VALVE (MOTOR SEAL SCAVENGE)

19
3 2 PRESSURE RELIEF VALVE (WHERE FITTED)
5 1 31
30 BALL VALVE (W.C. ONLY)
11 14 16
29 WATER SHUTOFF VALVE 4SV (W.C. ONLY)

21
P 28 PRESSURE TRANSDUCER 3APT

V 13
T
10 28 27
26
COOLING WATER OUTLET (W.C. ONLY)

COOLING WATER INLET (W.C. ONLY)

P 25 COOLING FAN

24 MOTOR, FAN

23 DRIVE MOTOR

21 TEMPERATURE THERMISTOR 2ATT

20 OIL TEMPERATURE CONTROL VALVE

19 SEPARATOR TANK (PRIMARY/SECONDARY)
B B
18 SCAVENGE FILTER / ORIFICE / CHECK VALVE
PIPING LEGEND 17 PRESSURE RELIEF VALVE

16 PRESSURE TRANSDUCER 4APT

AIR/COOLANT
15 MOISTURE SEPARATOR
AIR 14 MINIMUM PRESSURE CHECK VALVE

13 TEMPERATURE SWITCH 1TAS

COOLANT
T CONDENSATE
11
10
VALVE, AIR INLET
DRAIN VALVE, COOLANT

P 7
COOLING WATER
(W.C. ONLY)
9
8
PRESSURE INDICATION, COOLANT FILTER

COOLANT FILTER
9 6
30 7 CONDENSATE DISCHARGE
20 COMPRESSOR
ENCLOSURE 6 COOLER, COOLANT
27 5 COOLER, AIR
SENSOR
CONNECTION 3 AIR FILTER
2 COMPRESSOR

1 AIR DISCHARGE
DIAGRAM
POSITION DESCRIPTION
KEY TO COMPONENT
A A
WARNING: THE EXPORT OR REEXPORT OF THIS DRAWING OR A PRODUCT PRODUCED DO NOT SCALE DRAWING
BY THIS DRAWING IS SUBJECT TO U.S. EXPORT ADMINISTRATION REGULATIONS
AND OTHER APPLICABLE GOVERNMENT RESTRICTIONS OR REGULATIONS. DRAWING CONFORMS TO
THIRD ANGLE PROJECTION
STANDARD CONTROL SYSTEM PROPRIETARY NOTICE ASME Y14.5M - 1994
CAD GENERATED DRAWING,
THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET 2011DEC28
INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS NO MANUAL REVISIONS ALLOWED TITLE
GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION
AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE UNLESS OTHERWISE SPECIFIED: 2011DEC28
AND AGREES THAT, EXCEPT AS AUTHORIZED IN WRITING BY - REMOVE ALL BURRS AND SHARP CORNERS
INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY - WELD SYMBOLS TO BE IN ACCORDANCE
THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION
2011DEC28
WITH ANSI/AWS A2.4
THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS SIZE ESTIMATED WEIGHT DWG NO. REV
(KG UNLESS OTHERWISE SPECIFIED)
EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADE SECRET
INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO COPYRIGHT @ 2011
RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL Ingersoll Rand
COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM. SCALE: UNIT: SHEET
ALL RIGHTS RESERVED

8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED
 8 7 6 5 4 3 2 1

D 25
D
24

29

26
18

35
23
17
C 37 C

36

19 15
2 5 1
14 16
37 FILTER BREATHER (MOTOR SEAL SCAVENGE)

21
10 28
P 36

35
CHECK VALVE (MOTOR SEAL SCAVENGE)

PRESSURE RELIEF VALVE (WHERE FITTED)

13
T 34 BALL VALVE (W.C. ONLY)

3 P 29 WATER SHUTOFF VALVE 4SV (W.C. ONLY)

28 PRESSURE TRANSDUCER 3APT

27 COOLING WATER OUTLET (W.C. ONLY)

11
26 COOLING WATER INLET (W.C. ONLY)

V 25

24
COOLING FAN
MOTOR, FAN

B 23 DRIVE MOTOR B
21 TEMPERATURE THERMISTOR 2ATT

20 OIL TEMPERATURE CONTROL VALVE

AIR/COOLANT 19 SEPARATOR TANK (PRIMARY/SECONDARY)

18 SCAVENGE FILTER / ORIFICE / CHECK VALVE

AIR
17 PRESSURE RELIEF VALVE

T COOLANT 16
15
PRESSURE TRANSDUCER 4APT
MOISTURE SEPARATOR

P 7 CONDENSATE
14 MINIMUM PRESSURE CHECK VALVE

9 6 COOLING WATER 13 TEMPERATURE WITCH 1TAS

(W.C. ONLY) 11 VALVE, AIR INLET
20 34
COMPRESSOR 10 DRAIN VALVE, COOLANT
27 ENCLOSURE 9 PRESSURE INDICATION, COOLANT FILTER

SENSOR 8 COOLANT FILTER

CONNECTION 7 CONDENSATE DISCHARGE

6 COOLER, COOLANT
MODULATION
(OPTIONAL) 5 COOLER, AIR

3 AIR FILTER
A 2 COMPRESSOR A
1 AIR DISCHARGE
CONTROL SYSTEM INCLUDING DIAGRAM
POSITION DESCRIPTION
OPTIONAL MODULATION KEY TO COMPONENT
PROPRIETARY NOTICE TITLE

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET

INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND
DIAGRAM, P & I , (A.C/W.C)
IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY
RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE
DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS
AUTHORIZE D IN WRITING BY INGERSOLL-RAND CO. IT WILL (1)
M90-160 KW
NOT USE THE DRAWING OR ANY COPY THEREOF OR THE
CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; (2) NOT SIZE DWG NO. REV
COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS EITHER THE
DRAWING OR THE CONFIDENTIAL OR TRADESECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED TO RETAIN
24036071 A
THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL SCALE: SHEET
COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.

8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED