Bulletin PD-2.308 rev.

B 10/06

40CPQ050
40CPQ060
SCHOTTKY RECTIFIER 40 Amp

IF(AV) = 40Amp
VR = 50 - 60V

Major Ratings and Characteristics Description/ Features

Characteristics Values Units The 40CPQ... center tap Schottky rectifier has been opti-
mized for very low forward voltage drop, with moderate
leakage. The proprietary barrier technology allows for reli-
IF(AV) Rectangular 40 A able operation up to 150° C junction temperature. Typical
waveform applications are in switching power supplies, converters,
free-wheeling diodes, and reverse battery protection.
VRRM 50 - 60 V
150° C TJ operation
IFSM @ tp = 5 μs sine 3200 A Center tap TO-247 package
High purity, high temperature epoxy encapsulation for
VF @ 20 Apk, TJ=125°C 0.49 V enhanced mechanical strength and moisture resistance
(per leg) Very low forward voltage drop
High frequency operation
TJ - 55 to 150 °C Guard ring for enhanced ruggedness and long term
reliability

Case Styles

Base
Common
Cathode
2

1 3
Anode Anode
2 2
1
Common
Cathode
TO-247AC

www.irf.com 1
40CPQ050, 40CPQ060
Bulletin PD-2.308 rev. B 10/06

Voltage Ratings
Part number 40CPQ050 40CPQ060
VR Max. DC Reverse Voltage (V)
50 60
VRWM Max. Working Peak Reverse Voltage (V)

Absolute Maximum Ratings

Parameters 40CPQ... Units Conditions
IF(AV) Max. Average Forward Current 40 A 50% duty cycle @ TC = 120 °C, rectangular wave form
* See Fig. 5
IFSM Max. Peak One Cycle Non-Repetitive 3200 5μs Sine or 3μs Rect. pulse Following any rated
A load condition and with
Surge Current (Per Leg) * See Fig. 7 320 10ms Sine or 6ms Rect. pulse rated VRRM applied
EAS Non-Repetitive Avalanche Energy 18 mJ TJ = 25 °C, IAS = 2 Amps, L = 9.0 mH
(Per Leg)
IAR Repetitive Avalanche Current 2 A Current decaying linearly to zero in 1 μsec
(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical

Electrical Specifications
Parameters 40CPQ... Units Conditions
VFM Max. Forward Voltage Drop 0.53 V @ 20A
TJ = 25 °C
(Per Leg) * See Fig. 1 (1) 0.68 V @ 40A
0.49 V @ 20A
TJ = 125 °C
0.64 V @ 40A
IRM Max. Reverse Leakage Current 1.7 mA TJ = 25 °C
VR = rated VR
(Per Leg) * See Fig. 2 (1) 96 mA TJ = 125 °C
CT Max. Junction Capacitance (Per Leg) 1600 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
LS Typical Series Inductance (Per Leg) 7.5 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/ μs (Rated VR)

(1) Pulse Width < 300μs, Duty Cycle <2%

Thermal-Mechanical Specifications
Parameters 40CPQ... Units Conditions
TJ Max. Junction Temperature Range -55 to 150 °C
Tstg Max. Storage Temperature Range -55 to 150 °C
RthJC Max. Thermal Resistance Junction 1.25 °C/W DC operation * See Fig. 4
to Case (Per Leg)
RthJC Max. Thermal Resistance Junction 0.63 °C/W DC operation
to Case (Per Package)
RthCS Typical Thermal Resistance, Case 0.24 °C/W Mounting surface , smooth and greased
to Heatsink
wt Approximate Weight 6 (0.21) g (oz.)
T Mounting Torque Min. 6 (5) Kg-cm Non-lubricated threads
Max. 12 (10) (Ibf-in)
Case Style TO-247AC(TO-3P) JEDEC
Marking Device 40CPQ050
40CPQ060

2 www.irf.com
 40CPQ050, 40CPQ060
Bulletin PD-2.308 rev. B 10/06

1000 1000

T =150°C
J
100

ReverseCurrent - I (mA)
125°C

R
10 100°C

75°C
100 1

50°C
Instantaneous ForwardCurrent - I (A)

.1
25°C
F

.01
0 10 20 30 40 50 60
ReverseVoltage- VR(V)
T =150°C
10 J
Fig. 2 - Typical Values Of Reverse Current
T =125°C Vs. Reverse Voltage (Per Leg)
J
10000
T = 25°C
J
JunctionCapacitance- C (pF)

T =25°C
T

1
1000

.1 100
0 .2 .4 .6 .8 1 1.2 1.4 1.6 0 5 1015 202530 3540455055 6065
ForwardVoltageDrop- V (V) ReverseVoltage- VR(V)
FM
Fig. 1 - Max. Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance
(Per Leg) Vs. Reverse Voltage (Per Leg)
10
Thermal Impedance- ZthJC(°C/W)

1 D=0.50
D=0.33
D=0.25 P
DM
D=0.17
.1 t
D=0.08 1
t2
Notes:
.01
1. Dutyfactor D= t / t
1 2
SinglePulse
(Thermal Resistance) 2. PeakT =P xZ +T
J DM thJC C
.001
.00001 .0001 .001 .01 .1 1 10 100
t , Rectangular PulseDuration(Seconds)
1
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)

www.irf.com 3
40CPQ050, 40CPQ060
Bulletin PD-2.308 rev. B 10/06

155 16
D=0.08
RthJC (DC) =1.25°C/W 14 D=0.17
AllowableCaseTemperature- (°C)

D=0.25

atts)
12 D=0.33

AveragePower Loss- (W
145 D=0.50
10

8
RMSLimit
6 DC
135 DC
4

125 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
AverageForwardCurrent - I (A) AverageForwardCurrent - I (A)
F(AV) F(AV)
Fig. 5 - Max. Allowable Case Temperature Fig. 6 - Forward Power Loss Characteristics
Vs. Average Forward Current (Per Leg) (Per Leg)
10000

At Any Rated Load Condition

(A)

And With Rated RRM

V Applied
FSM

Following Surge
Non-Repetitive Surge Current - I

1000

100
10 100 1000 10000
Square Wave Pulse Duration - t p (microsec)
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)

HIGH-SPEED
DUT IRFP460 SWITCH

FREE-WHEEL
Rg = 25 ohm Vd = 25 Volt
DIODE +

CURRENT 40HFL40S02
MONITOR

Fig. 8 - Unclamped Inductive Test Circuit

4 www.irf.com
 40CPQ050, 40CPQ060
Bulletin PD-2.308 rev. B 10/06

Outline Table

Conform to JEDEC outline TO-247AC (TO-3P)

Dimensions in millimeters and (inches)

Marking Information

PART NUMBER
THIS IS A 40CPQ060 INTERNATIONAL
WITH LOT CODE 58 07 RECTIFIER 40CPQ060
ASSEMBLED ON WW 35, 2000 LOGO 035H
IN THE ASSEMBLY LINE "H" 58 07
DATE CODE
ASSEMBLY
YEAR 0 = 2000
LOT CODE
WEEK 35
LINE H

www.irf.com 5
40CPQ050, 40CPQ060
Bulletin PD-2.308 rev. B 10/06

Ordering Information Table

Device Code
40 C P Q 060 -

1 2 3 4 5 6

1 - Current Rating (40 = 40A)

2 - Circuit Configuration
C = Common Cathode
3 - Package
P = TO-247
4 - Schottky "Q" Series
050 = 50V
5 - Voltage Code
060 = 60V
6 - y none = Standard Production
y PbF = Lead-Free

Tube Standard Pack Quantity : 25 pieces

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 10/06

6 www.irf.com