Scribd
Upload
54 views3 pages

Pin Out cm870

Uploaded by

turbodinamica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
54 views3 pages

Pin Out cm870

Uploaded by

turbodinamica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Technician: Andy

Ok I have the diagram!


I will start with the 50 pin OEM connector!
pin location - description
1-idle validation off idle signal(fuel pedal)
2-diagnostic test mode(switch) signal wire
3-remote accelerator switch signal
4-remote pto switch signal
5-brake pedal position switch signal
6-air conditioning pressure switch signal
7-engine brake #3 position signal
8-engine brake #2 position signal
9-accelerator pedal position signal
10-SAE J1587 datalink(+)
11-idle validation on idle signal
12-centinel oil burn level switch signal
13-accelerator interlock switch/engine torque limit switch signal
14-maximum engine speed/governor type switch signal
15-clutch pedal position / engine protection override switch signal
16-cruise control/PTO on/off switch signal
17-fan control switch signal
18-engine brake position #1 signal
19-ambient air temperature signal
20-J1587 datalink (-)
21- sensor + 5 volt supply #1
22-accelerator pedal position + 5 volt supply
23-accelerator pedal postion return
24-cruise control/PTO resume/Accel increment signal switch
25-cruise control/PTO set/coast decrement signal switch
26-remote accelerator pedal signal
27-magnetic vehicle speed sensor signal +
28-engine coolant level signal
29-fan control solenoid return(optional)
30-tachograph signal
31-empty
32-sensor return #1
33-ether injection return
34-switch return
35-empty
36-magnetic vehicle speed sensor signal -
37-SAE J1939 data link shield
38-fan control signal
39-keyswitch input signal
40-ether injection signal
41-tachometer signal
42-optional relay return
43-red stop engine lamp signal
44-amber engine warning lamp signal
45-empty
46-SAE J1939 data link +
47-SAE J1939 data link -
48- idle shutdown relay signal
49-starter lockout relay signal
50-OEM lamp signal

Ask Your Own Heavy Equipment Question


Technician: Andy
Now here are the pin outs for the 60 pin engine side connector :
1- sensor return number 3
2- empty
3- barometric pressure signal
4- empty
5- turbo charger control shut off valve signal
6- SAE J1939 engine datalink -
7- SAE J1939 engine datalink shield
8- SAE J1939 engine datalink +
9- EGR valve motor signal +
10 - EGR valve motor signal -
11- Engine brake solenoid number 3 signal
12- EGR differential pressure signal
13- Intake manifold air temperature signal
14- water and fuel signal
15- engine coolant and temp signal
16- engine speed +5 volt supply
17- EGR temperature signal
18- empty
19- EGR valve position signal
20-exhaust gas pressure signal
21- turbo charger control valve signal
22- engine brake solenoid number 1 signal
23- engine oil pressure signal
24- turbo charger speed signal -
25- rail fuel pressure signal
26-camshaft position signal
27- engine speed signal
28- USB engine datalink return
29- Empty
30-engine fuel temperature signal
31- engine brake solenoid number 2 signal
32- empty
33- sensor =5 volt supply number 1
34 - turbo charger speed signal +
35 - real time clock battery supply
36 - empty
37- sensor +5 volt supply number 2
38 - sensor return number 1
39 - USB engine datalink supply
40 - USB engine datalink -
41- fuel lift pump relay signal
42- empty
43 - empty
44 - intake manifold pressure signal
45 - turbo charger compressor inlet air temperature signal
46 - empty
47 - sensor return number 2
48 - engine speed return
49 - USB engine datalink +
50 - engine oil temp signal
51 - fuel shut off valve signal
52 - front timing actuator +
53 - front timing actuator -
54 - rear timing actuator +
55 - rear timing actuator -
56 - rear fueling actuator +
57 - rear fueling actuator -
58 - front fueling actuator +
59 - front fueling actuator -
60 - centinel oil control valve signal

hope this helps, please click accept if this answer is satisfactory to you as this is how I get paid for my

You might also like