Scribd
Upload
4 views

Code 1

Uploaded by

vishnu raj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
4 views

Code 1

Uploaded by

vishnu raj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

# Example pseudo-code for mushroom farm automation

# Import necessary libraries


import dht
import machine
import network
import time
from machine import Pin, ADC, PWM

# Initialize sensors
temp_hum_sensor = dht.DHT22(Pin(4)) # DHT22 on pin 4
moisture_sensor = ADC(Pin(36)) # Moisture sensor on analog pin 36

# Initialize relay pins


relay_fan = Pin(18, Pin.OUT)
relay_mist = Pin(19, Pin.OUT)
relay_light = Pin(21, Pin.OUT)

# Define thresholds
TARGET_TEMP = 22 # Set desired temperature
TARGET_HUMIDITY = 85 # Target humidity level
MOISTURE_THRESHOLD = 50 # Adjust based on calibration

# Function to connect to Wi-Fi


def connect_wifi():
# Add Wi-Fi connection code
pass

# Main control loop


while True:
# Read temperature and humidity
temp_hum_sensor.measure()
temp = temp_hum_sensor.temperature()
humidity = temp_hum_sensor.humidity()

# Read moisture level


moisture = moisture_sensor.read()

# Control based on conditions


if temp > TARGET_TEMP:
relay_fan.on() # Turn on fan if temperature is high
else:
relay_fan.off()

if humidity < TARGET_HUMIDITY:


relay_mist.on() # Turn on misting if humidity is low
else:
relay_mist.off()

if moisture < MOISTURE_THRESHOLD:


relay_mist.on() # Additional misting if moisture is low
else:
relay_mist.off()

# Delay for a few seconds before next reading


time.sleep(5)

You might also like