BILLS
OF
QUANTITIES
FOR:
MAC DONALD BRICKS
REFURBISHMENTS TO LADIES' TOILETS
(BUILDERS WORKS)
Date: Aug-24
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
MACDONALD BRICKS
SECTION NO. 4 - BUILDERS WORKS
SUMMARY
1 Demolitions 4/1/1
2 Brickwork 4/2/3
3 Metalwork 4/3/1
4 Joinery & Ironmongery 4/4/1
5 Plasterwork 4/5/1
6 Pavings 4/6/1
7 Painting 4/7/1
8 Plumbing 4/8/1
9 Glazing 4/9/1
TOTAL
Section No. 4
SUMMARY 4/14/1
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 1
DEMOLITIONS
NOTES: 1. The contractor shall carry out the whole of the
works with as little mess and noise as possible and with
a minimum of disturbance to adjoining premises.
2. All demolished material will be carted away to a
to a site deemed suitable by the client.
BREAKING UP AND REMOVING
A Half brick internal wall, 2312mm High m 2
Carried FORWARD to Summary of Section No. 4
Section No. 4
Bill No. 1
DEMOLITIONS
4/1/1
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 2
BRICKWORK
For Preambles see General Specification
Approved common bricks laid in 1:4 cement mortar
laid in stretcher bond
A 115mm brick wall m2 11
Sundries
B "Cotts ref C1" brick reinforcement built into half brick
walls after every four courses, lapped at angles and
passings (measured net) m 44
Carried to Collection
Section No. 4
Bill No. 2
BRICKWORK
4/2/1
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
Leave or form opening through half brick wall including
temporary centering to flat soffits of brickwork complete with
all strutting, shoring not exceeding 5 metres high, bolting,
wedging easing, striking and removing
Set up in position and build into brickwork, including
building in cramps, grouting in solid behind frames
and pointing both sides all round in 1:4 cement mortar
B Pressed metal door frames not exceeding 5m2 No. 7
Carried to Collection
Section No. 4
Bill No. 2
BRICKWORK
4/2/2
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4
BILL NO.3
BRICKWORK
Total BROUGHT FORWARD from Page Number 4/2/1
4/2/2
Carried FORWARD to Summary of Section No. 4
Section No. 4
Bill No. 2
BRICKWORK
4/2/3
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 3
METALWORK
For Preambles see General Specification
PRIMED PRESSED STEEL DOOR FRAMES
Light Duty 0.8mm thick Pressed Steel frame in red
oxide primer for painting with cramps for building in
and steel butts
A Frame to suit half brick wall plastered both sides and
door size 813mm x 2032mm high No. 7
Carried FORWARD to Summary of Section No. 4
Section No. 4
Bill No. 3
METALWORK
4/3/1
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 4
JOINERY & IRONMONGERY
For Preambles see General Specification
DOORS
44mm internal quality hollow-core flush door with concealed
hardwood edge strips along vertical edges, finished both sides
with approved commercial veneer, suitable for painting and
hung to pressed steel frames ( elsewhere measured)
A Door size 813mm x 2032mm high No. 8
IRONMONGERY
The following ironmongery to be fixed to timber doors, and
pressed steel frames
B "Union gower" or equal and approved 3 lever lockset No. 1
No.
C "Union 8731SC" or equal and approved floor mount rubber door stop 1
Carried FORWARD to Summary of Section No. 4
Section No. 4
Bill No. 4
JOINERY and IRONMONGERY
4/4/1
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 5
PLASTERING & WALL LININGS
For Preambles see General Specification
INTERNALLY
12mm One coat cement/sand plaster with steel float
finish on to the following surfaces
A On new walls m2 22
12mm One coat cement/sand plaster with steel float
finish on to the following surfaces
B Existing walls inluding filling in cracks Item
Carried FORWARD to Summary of Section No. 4
Section No. 4
Bill No. 5
PLASTERING and WALL LININGS
4/5/1
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 6
PAVINGS & FLOOR COVERINGS
Unless described as "fixed with adhesive to plaster
(plaster elsewhere)" descriptions of tiling on brick or
concrete floors, columns, etc shall be deemed to
include 1:4 cement plaster backing and descriptions of
tiling on concrete floors etc shall be deemed to include
1:3 plaster bedding
CERAMIC FLOOR TILES
300X300mm Ceramic Floor Tiles
A On floor m2 39
Carried FORWARD to Summary of Section No. 4
Section No. 4
Bill No. 6
PAVINGS and FLOOR COVERINGS
4/6/1
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 7
PAINTING
ON PLASTER
INTERNALLY
Prepare, stop and apply one undercoat and two finishing
coats washable internal quality PVA paint (colour from
manufacturer's standard colour range) on the following
steel trowelled surfaces
A On new walls m2 22
Prepare, stop and apply two finishing coats washable
internal quality PVA paint (colour from manufacturer's
standard colour range) on the following steel trowelled
surfaces
B On existing walls m2 126
ON WOOD
Prepare, stop and apply one primer coat, two finishing
eggshell enamel coats paint (colour to Architect's
approval) on the following surfaces
C On general surfaces of doors m2 28
Prepare, stop and apply one undercoat and 1 finish coat in ceiling white paint
D On ceiling boards m2 39
ON METAL
Prepare, stop and apply one primer coat, one undercoat
and two coats eggshell enamel paint
E On steel door frames and linings m2 11
TOUCH UP
F Touch up and clean paint work requiring it, scrub floors
and pavings, clean down glass and leave premises and
site clean and whole site ready for occupation Item
Carried FORWARD to Summary of Section No. 4
Section No. 4
Bill No. 7
PAINTING
4/7/1
PROPSED REFURBISHMENTS
TO LADIES' TOILETS
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 8
SHEET METALWORK, PLUMBING AND ASSOCIATED SERVICES AND
DRAIN LAYING (PROVISIONAL)
For Preambles see General Specification
SANITARY FITTINGS
A "Vaal Potteries, Hibiscus (code 7050) or equal approved white
glazed vitreous china wash hand basin with two taphole
configuration, basin size 510mm x 405 mm and including
universal floor mounted pedestal (code 7150); basin complete
with over flow tube, plugs, chromium plated stays and chains
complete with 2no. "Cobra" Watertech pillar tap 114 - 115 or
equal approved chromium plated lever pillar taps; with and
including concealed wall brackets fixed to walls and jointing to
waste pipes and water supplies No. 5
B Vaal Sanitaryware vitreous china "parktown pan" 90⁰ outlet top
inlet (code 431500) or back inlet (code 431600) closed rim back
to wall pan. Top inlet can be used with an exposed flushvalve.
Back inlet with a Vaal Sanitaryware high quality non-corrossive
6/3 litre dual flush Wisa concealed cistern (code 8827Z000) and
control panel with intergrated flush actuator. No. 5
C Stainelss Steel Tissue roll holder No. 5
D 15mm 181/020/070CP shower mixer with riser pipe, arm and
shower head No. 2
Sundries
E 50 mm "P" or "S" rubber flexitrap joined to waste fitting and waste
pipe No. 5
F 40 mm metal shower p-trap in slab No. 2
G Stainless steel shower grating No. 2
H Allow for water and waste water pipework systems etc Item
Testing
J Allow for testing of sanitary installations including flushing out
pipes, cleaning out traps etc Item
Carried FORWARD to Summary of Section No. 4
Section No. 4
Bill No. 8
PLUMBING and DRAINAGE INSTALLATIONS ETC
4/8/1
PROPSED REFURBISHMENTS
TO CANTEEN
SECTION NO. 4 - BUILDERS WORKS
BILL NO. 9
For Preambles see General Specification
GLAZING
6mm Polished sheet glass silvered back mirror , with
bevelled edges sprayed on back with lacquer
before fixing on plywood backing and polished
edges, holed for and including four dome capped
chromium plated mirror screws with felt washers and
fixed in position to wall.
A Size 450mm x 450mm No. 5
Carried FORWARD to Summary of Section No. 5
Section No. 4
Bill No. 9
GLAZING
4/9/1
