1200
B220MN IMPACT COPOLYMER
FOR INJECTION MOULDED PRODUCTS
Repol B220MN is recommended for use in Injection Moulding processes where high flow and medium impact strength are required.
It is an ideal material to use in rigid packaging, automotive components, housewares and appliances parts. Repol B220MN contains
nucleating agent.
Typical Characteristics
Property Test Method Unit Typical Value*
Melt Flow Rate (230°C/2.16 kg) ASTM D1238 g/10 min 22
Tensile Strength at Yield (50 mm/min) ASTM D638 Mpa 25
Elongation at Yield (50 mm/min) ASTM D638 % 8
Flexural Modulus (1% secant) ASTM D790A Mpa 1200
Notched Izod Impact Strength (23°C) ASTM D256 J/m 80
Heat Deflection Temperature (455 kPa) ASTM D648 °C 105
* Typical values, not to be taken as specification. All the mechanical properties as per ASTM D638 Type I specimen injection moulded in accordance with ASTM D4101
Applications
Appliances, automotive.
Regulatory Information
• Meets the requirements stipulated in IS 10910 on ‘Specification for Polypropylene and its Copolymers for safe use in contact with
foodstuff, pharmaceuticals, and drinking water’. Additives incorporated in this grade conform to the positive list of constituents
as prescribed in IS 10909. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177.1520,
Olefin polymers.
Storage Recommendations
• Bags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight
Reliance Industries Limited, Product - Application & Technology Group, PRTC,
Swastik Mill Compound, V. N. Purav Marg, Chembur, Mumbai-400 071. Tel.: +91-22-6767 7000. E-mail:
[email protected] Website: www.ril.com
• The information and data presented herein is true and accurate to the best of our knowledge. No warranty or guarantee expressed or implied, is made regarding performance or otherwise. This
information and data may not be considered as a suggestion to use our products without taking into account existing patents, or legal provisions or regulations, whether national or international. • The user of
any information and/or data is advised to obtain the latest details from any of the offices of the company or its authorised agents, as the information and/or data is subject to change based on the research and
development work undertaken by the company.
Updated as Of March 2009
