Scribd
Upload
34 views2 pages

mx6000 Series Rev e

Uploaded by

cfdelange1985
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views2 pages

mx6000 Series Rev e

Uploaded by

cfdelange1985
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MX6000 Series

Multi Function Controller

• Single Ethernet 100Mb interface expands into six RS485 buses


• Directly controls up to six continuous particle counters
• Provides RS485 bus for Series 8000 Air Samplers
• Provides RS485 bus for Series 2000 Environmental modules
• Provides RS485 bus for Alarm Message Displays
• Provides RS485 bus for Watchdog Module

• Six independent RS485 communications interfaces


• Real Time Clock
• Micro SD card support
®
• High performance ARM processor

The MX6000 series provides unparalleled flexibility


and functionality in a single compact module. By
simply connecting a single Ethernet cable from
the host PC and supplying 24Vdc power, this
powerful module provides all the functionality
to drive ‘swappable’ particle counters, alarm
message displays, environmental inputs, Air Sampler
controllers, a beacon stack and watchdog subsystems
simultaneously.

A single physical Ethernet port expands into six


physical RS485 serial buses. The RS485 buses
appear within the host PC as virtualised COM ports
and behave like local COM ports on the PC. Perfectly
matched to enVigil FMS and enVigil PnP, this single
module combines the functionality of an Ethernet Serial
Device Server, multiple particle counter controllers and
an alarm beacon interface. Available in two versions;
one with screw terminals for the six RS485 buses and
one with RJ45 connectors for the RS485 buses.

The MX6000 series supports up to six particle


counters directly and offer an pass-through mode to
additional MX6000 modules that act as expanders
each supporting up to six particle counters. The
pass-through mode automatically recognises serial
protocol requests for particle counters beyond its
local capability and transparently redirects them via
Ethernet to the appropriate MX6000 module.

The on-board real-time clock and Micro SD storage


make it possible for data to be logged local to the
MX6000 during communications loss or failure of the
host PC and results retrieved later via FTP.

MX6000 is configured using a utility that defines global


settings such as IP address and selects the ‘task’ or function
associated with each RS485 port.
Specification
Example Host PC
MX6000
configuration Ethernet

Alarm Beacon
MX6000 Dig I/O
Alarm Mute
Watchdog

RS485
Particle Counter Alarm Indicators

Particle Counter

Air Samplers Environmentals

MX6000 Series Multi Function Controller Specification


• Digital Outputs
6 outputs to drive contactors or solenoid valves for particle counter vacuum control
4 outputs to drive alarm beacon red, amber, green and sounder
All outputs provide 24Vdc current limited to 500mA

• Digital Inputs
6 inputs to act as ‘Run’ demand for particle counters
1 input to act as ‘Mute’ for alarm sounder
All inputs are opto-isolated inputs (200V isolation)

• RS485 Interaces
Six independent 2-wire RS485 Interfaces via RJ45 connectors (MX6000) or screw terminals
(MX6001)
Switched 24Vdc current limited supply for particle counter

• Ethernet interface
Ethernet interface to host PC (100Mb)

• Power supply
24Vdc ±10%, 50mA typical, plus loads being driven

• Additional features
Real-time clock with battery backup
Micro SD card socket supporting up to 2GB Micro SD cards for non-volatile configuration

• Flange mounting enclosure (High Impact Polystyrene, UL94-HB)


W: 154mm
H: 108mm including mounting flanges
D: 20mm excluding connectors, 31mm including connectors
Fixing centres: 118mm horizontally, 93mm vertically)

• Environmental
Operating temperature 0 to 50°C
Storage temperature -20 to 60°C

Ordering Information
• MX6000 Multifunction Controller Module with RJ45 connectors for RS485 interfaces
• MX6001 Multifunction Controller Module with screw terminals for RS485 interfaces

Pharmagraph is a division of Acquisition Systems Ltd

Pharmagraph, 39 Ivanhoe Road, Hogwood Industrial Estate, Finchampstead, Berkshire, UK, RG40 4QQ
Tel: +44 (0) 1252 861700 Fax: +44 (0) 1252 861155
www.pharmagraph.co.uk e-mail: [email protected]
Document 10151171 Rev E © Acquisition Systems Ltd 2019

You might also like