STANDARD FEATURES OF WAGONS

STC/SPJ
 BOXN Wagon(B=Bogie,O=Open,X=High Side,N=A/Brake

BOXN wagon has been designed for transportation of iron ores, coal etc. either fitted with
Casnub-22W/ 22W(M)/22 NLB bogies,
STANDARD FEATURES OF ‘BOXN’ WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 9784
2. Length over couplers (mm) 10713
3. Width inside/Width Overall (mm) 2950/3200
4. Height inside/Height (max.) from RL. 1950/3233
5. Bogie centers (mm) 6524
6. Cubic Capacity (Cu.M) 56.29
7. Axle load (tonne) 20.32
8. Tare Weight (tonne) 23.2
9. Pay load (tonne) 58.08
10. Gross load (Pay+Tare) (tonne) 81.28
BOXNCR Wagon(C=Corrosion,R=Resistant)

The wagon is a variant of BOXN wagon with its body

in IRS M-44 steel. It’s under frame is however made of
mild steel. This has been done to provide better
corrosion resistance to wagon body. All parameters of
this wagon are same as that of BOXN wagon.
BOXNHA WAGON(H=Higher,A=A/Load
This wagon has been designed for transportation of coal
to axle load of 22.1t. It has higher sidewalls compared to
BOXN wagon.
STANDARD FEATURES OF ‘BOXNHA’ WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 9784
2. Length over couplers (mm) 10713
3. Width inside/Width Overall (mm) 2950/3200
4. Height inside/Height (max.) from RL. 2175/3450
5. Bogie centers (mm) 6524
6. Cubic Capacity (Cu.M) 62.8
7. Axle load (tonne) 22.1
8. Tare Weight (tonne) 23.17
9. Pay load (tonne) 65.23
10. Gross load (Pay+Tare) (tonne) 88.4
BOXNHS WAGON (H=High ,S=Speed)

The wagon is variant of BOXN wagon with operating

speed of 100 kmph in empty and 100 kmph in loaded
condition. In this wagon high speed bogies have been
provided. The other parameters of this wagon are same
as of BOXN wagon.
BOXN (LW) WAGON(L=Low, W=Weight)
To meet the requirement of higher pay to tare ratio, this
bogie open wagon was designed in 1988. Cold Rolled
Formed (CRF) sections and stainless steel/carton steel
are used in design to reduce the tare weight of the wagon.
STANDARD FEATURES OF ‘BOXN (LW)’ WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 9784
2. Length over couplers (mm) 10713
3. Width inside/Width Overall (mm) 3022/3250
4. Height inside/Height (max.) from RL. 2066/3341
5. Bogie centers (mm) 6524
6. Cubic Capacity (Cu.M) 61.09
7. Axle load (tonne) 20.32
8. Tare Weight (tonne) 18.26
9. Pay load (tonne) 63.02
10. Gross load (Pay+Tare) (tonne) 81.28
BOXNHL WAGON (H=Heavy ,L=Load)
This bogie open wagon was designed at 22.9t axle load
and 250mm longer than BOXNHS wagon. The wagon is
manufactured by using stainless steel and cold rolled
sections.
STANDARD FEATURES OF ‘BOXNHL’ WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 10034
2. Length over couplers (mm) 10963
3. Width inside/Width Overall (mm) 3022/3250
4. Height inside/Height (max.) from RL. 2028/3301
5. Bogie centers (mm) 6690
6. Cubic Capacity (Cu.M) 61.05
7. Axle load (tonne) 22.9
8. Tare Weight (tonne) 20.6
9. Pay load (tonne) 71.0
10. Gross load (Pay+Tare) (tonne) 91.6
BOXNEL WAGON (E=Exteme, L=Load)
This wagon has been designed for transportation of iron
ores, coal etc. BOXNEL wagons fitted with Casnub-
22NLC bogies with a maximum axle load 25 t.
STANDARD FEATURES OF ‘BOXNEL’ WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 9784
2. Length over couplers (mm) 10713
3. Width inside/Width Overall (mm) 2950/3200
4. Height inside/Height (max.) from RL. 1950/3233
5. Bogie centers (mm) 6524
6. Cubic Capacity (Cu.M) 56.29
7. Axle load (tonne) 25
8. Tare Weight (tonne) 23.1
9. Pay load (tonne) 76.9
10. Gross load (Pay+Tare) (tonne) 100
 BOXNR WAGON(R=Rehabilitate)
This wagon has been designed for transportation of iron
ores, coal etc.
STANDARD FEATURES OF ‘BOXNR’ WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 9784
2. Length over couplers (mm) 10713
3. Width inside/Width Overall (mm) 2954/3176
4. Height inside/Height (max.) from RL. 2127/3408
5. Bogie centers (mm) 6524
6. Cubic Capacity (Cu.M) 61.47
7. Axle load (tonne) 22.9
8. Tare Weight (tonne) 21.2
9. Pay load (tonne) 70.4
10. Gross load (Pay+Tare) (tonne) 91.6
 BOXNAL WAGON(AL=Aluminium)
This is light weight, without door aluminium alloy wagon.
STANDARD FEATURES OF BOXNAL WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 9784
2. Length over couplers (mm) 10713
3. Width inside/Width Overall (mm) 3022/3250
4. Height inside/Height (max.) from RL. 2066/3341
5. Bogie centers (mm) 6524
6. Cubic Capacity (Cu.M) 61.47
7. Axle load (tonne) 22.9
8. Tare Weight (tonne) 21.2
9. Pay load (tonne) 70.4
10. Gross load (Pay+Tare) (tonne) 91.6
 BOST WAGON(ST=Steel)
This bogie open wagon was designed for transportation of
coal as well as steel products. The under frame has been
strengthened during the design to sustain point loading of
steel consignment.
STANDARD FEATURES OF ‘BOST’ WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 12800
2. Length over couplers (mm) 13729
3. Width inside/Width Overall (mm) 2850/3100
4. Height inside/Height (max.) from RL. 1950/3080
5. Bogie centers (mm) 8800
6. Cubic Capacity (Cu.M) 65.79
7. Axle load (tonne) 20.32
8. Tare Weight (tonne) 25.5
9. Pay load (tonne) 55.78
10. Gross load (Pay+Tare) (tonne) 81.28
BOSTHS WAGON

The wagon is variant of BOST wagon with operating

speed of 100 kmph in empty and 100 kmph in
loaded condition. In this wagon high speed bogies
have been provided. The other parameters of this
wagon are same as of BOST wagon.
BOYEL WAGON(B=Bogie,O=Open,Y=Low Side,EL=Enhanced Load
This wagon has been designed for transportation of iron ores, coal etc.
BOYEL wagons fitted with Casnub-22NLC bogies with a maximum axle load
25 t.
STANDARD FEATURES OF ‘BOYEL’ WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 11000
2. Length over couplers (mm) 11929
3. Width inside/Width Overall (mm) 2924/3134
4. Height inside/Height (max.) from RL. 1175/2450
5. Bogie centers (mm) 7330
6. Cubic Capacity (Cu.M) 37.8
7. Axle load (tonne) 25
8. Tare Weight (tonne) 20.7
9. Pay load (tonne) 79.3
10. Gross load (Pay+Tare) (tonne) 100
 BCN COVERED WAGON
This bogie covered wagon designed at 20.32t axle load in
1984.The construction of wagon was purely riveted. The
wagon was designed for transportation of bag
commodities.
STANDARD FEATURES OF ‘BCN’ COVERD WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 14500
2. Length over couplers (mm) 15429
3. Width inside/Width Overall (mm) 2944/3100
4. Height inside/Height (max.) from RL. 2446/3788
5. Bogie centers (mm) 10000
6. Cubic Capacity (Cu.M) 104.00
7. Axle load (tonne) 20.32
8. Tare Weight (tonne) 27.20
9. Pay load (tonne) 54.08
10. Gross load (Pay+Tare) (tonne) 81.28
BCNA COVERED WAGON(Here A=Altitude)
This wagon is an improved BCN wagon having reduced
length and increase height by keeping volumetric capacity
same and the wagon was fully welded construction.
STANDARD FEATURES OF ‘BCNA’ COVERD WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 13521
2. Length over couplers (mm) 14450
3. Width inside/Width Overall (mm) 2944/3200
4. Height inside/Height (max.) from RL. 2677/4017
5. Bogie centers (mm) 9500
6. Cubic Capacity (Cu.M) 103.40
7. Axle load (tonne) 20.32
8. Tare Weight (tonne) 24.55
9. Pay load (tonne) 56.73
10. Gross load (Pay+Tare) (tonne) 81.28
BCNAHS COVERED WAGON

This wagon is variant of BCNA wagon with high speed

bogie CASNUB-22HS-BOGIE. The other parameters
of this wagon are same as of BCNA wagon.
BCNHL COVERED WAGON
This wagon fitted with twin pipe graduated release air
brake system, high tensile non transition type CBC and
stainless steel, CRF section body.
STANDARD FEATURES OF BCNHL WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 10034
2. Length over couplers (mm) 10963
3. Width inside/Width Overall (mm) 3345/3450
4. Height inside/Height (max.) from RL. 3024/4305
5. Bogie centers (mm) 7153
6. Cubic Capacity (Cu.M) 92.54
7. Axle load (tonne) 22.9
8. Tare Weight (tonne) 20.8
9. Pay load (tonne) 70.8
10. Gross load (Pay+Tare) (tonne) 91.6
STANDARD FEATURES OF BCBFG WAGON (Here BFG=Hopper Food Grains)
S.No PARTICULARS Parameter
1. Length over head stock (mm) 11861
2. Length over couplers (mm) 12790
3. Width inside/Width Overall (mm) 3140/3250
4. Height (max.) from RL. 4260
5. Bogie centers (mm) 8661
6. Cubic Capacity (Cu.M) 81.76
7. Axle load (tonne) 21.82
8. Tare Weight (tonne) 26.44
9. Pay load (tonne) 60.84
10. Gross load (Pay+Tare) (tonne) 87.28
BRN FLAT WAGON(B=Bogie,R=Rail Carriaing ,N=A/Brake)

This bogie rail wagon was designed in 1994. The wagon

Design is with air brake and welded construction.
STANDARD FEATURES OF ‘BRN’ FLAT WAGON
S.No PARTICULARS Parameter
1. Length over head stock (mm) 13716
2. Length over couplers (mm) 14645
3. Width inside/Width Overall (mm) 2845
4. Height (max.) from RL. 2544
5. Bogie centers (mm) 9144
6. Axle load (tonne) 20.32
7. Tare Weight (tonne) 24.393
8. Pay load (tonne) 56.887
9. Gross load (Pay+Tare) (tonne) 81.28
STANDARD FEATURES OF BRHNEHS WAGON

S.No PARTICULARS Parameter

1. Length over head stock (mm) 13716
2. Length over buffer/coupler (mm) 14986/14998
3. Width inside/Width Overall (mm) 2845/3049
4. Height inside/from RL. 1564/2008
5. Bogie centers (mm) 9144
6. Cubic Capacity (Cu.M) Flat wagon
7. Axle load (tonne) 20.32
8. Tare Weight (tonne) 22.6
9. Pay load (tonne) 58.68
10. Gross load (Pay+Tare) (tonne) 81.28
 BFNS FLAT WAGON
The wagon was designed specially for transportation of
hot rolled/cold rolled coils, plates, sheets and billets etc.
S.No PARTICULARS Parameter
1. Length over head stock (mm) 13716
2. Length over couplers (mm) 14645
3. Width inside/Width Overall (mm) 2845
4. Bogie centers (mm) 9144
5. Axle load (tonne) 20.32
6. Tare Weight (tonne) 26.71
7. Pay load (tonne) 54.57
8. Gross load (Pay+Tare) (tonne) 81.28
 HOPPER TYPE “BOBR”WAGON
This wagon is designed for transportation of coal with
bottom discharge facility for faster evacuation.