Data sheet 6AG1543-6WX00-7XE0
SIPLUS ET 200SP CP 1543SP-1 ISEC based on 6GK7543-6WX00-0XE0 with
conformal coating, -40…+70 °C, security (firewall and VPN) open IE
communication (TCP/IP, ISO-on-TCP, UDP) PG/OP, S7 routing, IP
broadcast/multicast, SNMPV1/V3, DHCP, secure email, IPv4/IPv6, support of
SINEMA Remote Connect with autoconfiguration, time synchronization via NTP,
access to web server of CPU, BusAdapter required
transfer rate
transfer rate
● at the 1st interface 10 ... 100 Mbit/s
interfaces
number of interfaces / according to Industrial Ethernet 1
number of electrical connections
● at the 1st interface / according to Industrial Ethernet 2
type of electrical connection
● at the 1st interface / according to Industrial Ethernet via ET 200SP bus adapter (RJ45, FC, SCRJ), integrated switch
supply voltage, current consumption, power loss
type of voltage / of the supply voltage DC
supply voltage 24 V
supply voltage 19.2 ... 28.8 V
power loss [W] 6W
ambient conditions
ambient temperature
● for vertical installation / during operation -40 ... +50 °C
● for horizontally arranged busbars / during operation -40 ... +70 °C
● during storage -40 ... +70 °C
● during transport -40 ... +70 °C
installation altitude / at height above sea level / maximum 5000 m
ambient condition / relating to ambient temperature - air Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax
pressure - installation altitude - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K)
at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
relative humidity
● with condensation / according to IEC 60068-2-38 / 100 %; RH including condensation/frost (no commissioning when condensation
maximum is present), horizontal installation
chemical resistance / to commercially available cooling Yes; incl. airborne diesel and oil droplets
lubricants
resistance to biologically active substances
● conformity according to EN 60721-3-3 Yes; Class 3B2 mold and fungal spores (excluding fauna), Class 3B3 on
request
● conformity according to EN 60721-3-6 Yes; Class 6B2 mold, fungal and dry rot spores (excluding fauna)
resistance to chemically active substances
● conformity according to EN 60721-3-3 Yes; Class 3C4 (RH < 75 %) incl. salt spray in accordance with EN 60068-2-52
(Severity 3). The supplied plug covers must remain in place on the unused
interfaces during operation.
● conformity according to EN 60721-3-6 Yes
resistance to mechanically active substances
● conformity according to EN 60721-3-3 Yes; Class 3S4 incl. sand, dust. The supplied plug covers must remain in place
over the unused interfaces during operation.
● conformity according to EN 60721-3-6 Yes; Class 6S3 incl. sand, dust. The supplied plug covers must remain in place
over the unused interfaces during operation.
6AG15436WX007XE0 Subject to change without notice
8/23/2024
Page 1/3 © Copyright Siemens
coating / for equipped printed circuit board / according to EN Yes; Class 2 for high availability
61086
type of coating / protection against pollution according to EN Yes; Protection of the type 1
60664-3
type of test / of the coating / according to MIL-I-46058C Yes; Coating discoloration during service life possible
product conformity / of the coating / Qualification and Yes; Conformal coating, class A
Performance of Electrical Insulating Compound for Printed
Board Assemblies according to IPC-CC-830A
protection class IP IP20
design, dimensions and weights
width 60 mm
height 117 mm
depth 74 mm
net weight 0.18 kg
fastening method
● 35 mm top hat DIN rail mounting Yes
product features, product functions, product components / general
number of units
● per CPU / maximum 2
● note 2 CPs can be pluged in per CPU, simultaneous operation with BA Send and
CM DP is possible
performance data / open communication
number of possible connections / for open communication
● by means of T blocks / maximum 32
data volume
● as user data per ISO on TCP connection / for open 65536 byte
communication / by means of T blocks / maximum
performance data / S7 communication
number of possible connections / for S7 communication
● maximum 16
● with OP connections / maximum 16
performance data / multi-protocol mode
number of active connections / with multi-protocol mode 32
performance data / IT functions
number of possible connections
● as email client / maximum 1
product functions / management, configuration, engineering
product function / MIB support Yes
protocol / is supported
● SNMP v1 Yes
● SNMP v3 Yes
● DCP Yes
● LLDP Yes
configuration software
● required STEP 7 Professional V14 (TIA Portal) or higher
identification & maintenance function
● I&M0 - device-specific information Yes
● I&M1 - higher level designation/location designation Yes
product functions / diagnostics
product function / web-based diagnostics Yes; via ET 200SP CPU
product functions / security
firewall version stateful inspection
product function / with VPN connection IPsec, SINEMA RC
type of encryption algorithms / with VPN connection AES-256, AES-192, AES-128, 3DES-168, DES-56
type of authentication procedure / with VPN connection Preshared key (PSK), X.509v3 certificates
type of hashing algorithms / with VPN connection MD5, SHA-1
number of possible connections / with VPN connection 4
product function
● switch-off of non-required services Yes
● blocking of communication via physical ports Yes
● log file for unauthorized access Yes
product functions / time
6AG15436WX007XE0 Subject to change without notice
8/23/2024
Page 2/3 © Copyright Siemens
product function / SICLOCK support Yes
product function / pass on time synchronization No
protocol / is supported
● NTP Yes
● NTP (secure) Yes
time synchronization
● from NTP-server Yes
standards, specifications, approvals
reference code
● according to IEC 81346-2:2019 KEC
further information / internet links
internet link
● to web page: selection aid TIA Selection Tool https://www.siemens.com/tstcloud
● to website: Industrial communication https://www.siemens.com/simatic-net
● to web page: SiePortal https://sieportal.siemens.com/
● to website: Image database https://www.automation.siemens.com/bilddb
● to website: CAx-Download-Manager https://www.siemens.com/cax
● to website: Industry Online Support https://support.industry.siemens.com
security information
security information Siemens provides products and solutions with industrial cybersecurity functions
that support the secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber
threats, it is necessary to implement – and continuously maintain – a holistic,
state-of-the-art industrial cybersecurity concept. Siemens’ products and
solutions constitute one element of such a concept. Customers are responsible
for preventing unauthorized access to their plants, systems, machines and
networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or
network segmentation) are in place. For additional information on industrial
cybersecurity measures that may be implemented, please visit
www.siemens.com/cybersecurity-industry. Siemens’ products and solutions
undergo continuous development to make them more secure. Siemens strongly
recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are
no longer supported, and failure to apply the latest updates may increase
customer’s exposure to cyber threats. To stay informed about product updates,
subscribe to the Siemens Industrial Cybersecurity RSS Feed under
https://www.siemens.com/cert. (V4.7)
Approvals / Certificates
General Product Approval EMV
Miscellaneous Manufacturer Declara-
tion
For use in hazardous locations
last modified: 8/22/2024
6AG15436WX007XE0 Subject to change without notice
8/23/2024
Page 3/3 © Copyright Siemens
