Features

NT
■ Conductive plastic

IA
PL
M ■ PC board and bushing mount
CO
S
oH

■ Plastic or metal bushing and plastic shaft

*R

■ Withstands typical industrial washing

processes
■ Compact package saves board and panel
space

3310 - 9 mm Square Sealed Panel Control

Electrical Characteristics
Standard Resistance Range - Linear .................................................................................................................................................. 1 K ohms to 1 megohm
Total Resistance Tolerance - Linear Tapers .................................................................................................................................................................... ±20 %
Independent Linearity ....................................................................................................................................................................................................... ±5 %
Absolute Minimum Resistance ..................................................................................................................................................................... 2 ohms maximum
Effective Electrical Angle ......................................................................................................................................................................................... 270 ° ±15 °
Contact Resistance Variation ........................................................................................................................................... 1 % or 1 ohm (whichever is greater)
Dielectric Withstanding Voltage (MIL-STD-202 – Method 301)
Sea Level ............................................................................................................................................................................................... 900 VAC minimum
70,000 Feet ........................................................................................................................................................................................... 350 VAC minimum
Insulation Resistance ...................................................................................................................................................................... 1,000 megohms minimum
Power Rating @ 70 °C (Derate to 0 at 125 °C - Voltage Limited By Power Dissipation or 200 VAC, Whichever is Less) ...................................... 0.25 watts
Theoretical Resolution ...................................................................................................................................................................................Essentially infinite

Environmental Characteristics
Operating Temperature Range .......................................................................................................................................-40 °C to +125 °C (-40 °F to +257 °F)
Storage Temperature Range .........................................................................................................................................-55 °C to +125 °C (-67 °F to +257 °F)
Temperature Coefficient Over Storage Temperature Range ............................................................................................................................ ±1,000 ppm/°C
Vibration ............................................................................................................................................................................................................................ 30 G
Total Resistance Shift .................................................................................................................................................................................±1 % maximum
Voltage Ratio Shift ......................................................................................................................................................................................±1 % maximum
Shock .............................................................................................................................................................................................................................. 100 G
Total Resistance Shift .................................................................................................................................................................................±1 % maximum
Voltage Ratio Shift ......................................................................................................................................................................................±1 % maximum
Load Life................................................................................................................................................................................................................. 1,000 hours
Total Resistance Shift .......................................................................................................................................................................±10 % TRS maximum
Rotational Life (No Load) ..................................................................................................................................................................................... 50,000 cycles
Total Resistance Shift .........................................................................................................................................................................±5 % TRS maximum
Contact Resistance Variation ................................................................................................................................... 3 % or 3 ohms, whichever is greater
Moisture Resistance .................................................................................................................................................. MIL-STD-202, Method 103, Condition B
Total Resistance Shift .......................................................................................................................................................................±10 % TRS maximum
IP Rating ............................................................................................................................................................................................................................. IP67

Mechanical Characteristics
Stop Strength ........................................................................................................................................................................................... 5.65 N-cm (8 oz.-in.)
Mechanical Angle ................................................................................................................................................................................................ 300 ° nominal
Torque
Starting ............................................................................................................................................................................3.53 N-cm (5.0 oz.-in.) maximum
Running ...........................................................................................................................................................................3.53 N-cm (5.0 oz.-in.) maximum
Mounting (Torque on Bushing) ......................................................45 N-cm (4.0 lb.-in.) max [plastic bushing]; 79 N-cm (7.0 lb.-in.) max [metal bushing]
Weight (Single Section).............................................................................................................................................................................................. 4.5 grams
(Each Additional Section) .................................................................................................................................................................................... 2.5 grams
Terminals .......................................................................................................................................................................................................... Solderable pins
Soldering Condition
Manual Soldering ................................................ 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire; 370 °C (700 °F) max. for 3 seconds
Wave Soldering .........................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 °C (500 °F) max. for 5 seconds
Wash Processes ....................................................... For recommended wash processes, please refer to http://www.bourns.com/pdfs/sldclen.pdf
Marking................................................................. Manufacturer’s trademark, model number, product code, terminal style, resistance code and date code
Ganging ..........................................................................................................................................................................................................2 cups maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
Flammability ........................................................................................................................................................................................... Conforms to UL94V-0
Epoxy .................................................................................................................................................................................................... Conforms to UL 94V-1
IP Rating ............................................................................................................................................................................................................................. IP67

Switch Characteristics
Switch Life ................................................................................................................................................................................................................10K cycles
Contact Resistance .............................................................................................................................................................................................. 2 ohms max.
Dielectric Strength .......................................................................................................................................................................................................350 VDC
Detent Torque ...................................................................................................................................................................................................... 0.5 oz-in min.
Power Rating (Resistive Load) .....................................................................................................................................................................100 mA @ 16 VDC

*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Additional Features
■ Audio taper versions available as special order
■ RoHS compliant*

3310 - 9 mm Square Sealed Panel Control

Standard Resistance Table How To Order
Resistance Resistance 3310 Y - 0 0 1 - 103 L
(Ohms) Code
1,000 102 Model Number Designator
2,000 202 3310 = 9 mm Panel Control
5,000 502
10,000 103 Terminal Style Designator
20,000 203 Single Cup:
50,000 503 C = In-line Straight Terminals Side Exit 2.54 mm centers
100,000 104 R = In-line Terminals Rear Exit 2.54 mm centers
200,000 204 P = 5.08 mm x 2.54 mm Triangular Pattern Rear Exit
500,000 504
1,000,000 105 Y = 5.08 mm x 5.08 mm Triangular Pattern Rear Exit

Popular values listed in boldface. Consult Dual Cup (Pot/Pot or Pot/Switch):

factory for special resistances. H = Dual In-line Straight Terminals Rear Exit 2.54 mm centers
Shaft End Designator
0 = Shaft End Slotted
1 = Shaft End Flatted
Shaft Length Designator
0 = 12.7 mm FMS Long Plastic Shaft (Available w/bushing only)
1 = 19.05 mm FMS Long Plastic Shaft (Available w/bushing only)
2 = 5.59 mm FMS Long Plastic Shaft (Bushingless version only)
Bushing Designator
Pot (or Pot/Pot):
1 = 6.35 mm x 6.35 mm Plastic
2 = 6.35 mm x 6.35 mm Ni Plated Brass
5 = Bushingless (Board Level Control)
Pot/Switch Bushing Designator (use with “H” terminal style only.)
3 = 6.35 mm x 6.35 mm Plastic
4 = 6.35 mm x 6.35 mm Ni Plated Brass
6 = Bushingless (Board Level)
Resistance Code
(1st 2 digits are significant, 3rd digit is number of 0s to follow)
RoHS Identifier
L = Compliant

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.
 3310 - 9 mm Square Sealed Panel Control
Product Dimensions
COMMON DIMENSIONS 3310C-001 3310Y-001 9.53 ± .25
3310-001 (.375 ± .010)
Plastic Bushing 2
Slotted Shaft 9.53 ± .25
(.375 ± .010)
9.53 ± .25
3 1 (.375 ± .010)
9.53 ± .25
(.375 ± .010)
3.91 ± .38 2.54 ± .25 2.54 ± .25
(.154 ± .015) (.100 ± .010) (.100 ± .010)
.51 ± .05 3 2 1
DIA.
(.020 ± .002)
5.97 ± .89 5.97 ± .89
SOLDER PLATED
(.235 ± .035) 5.08 ± .25 (.235 ± .035)
COPPER PINS 3 2 1
3310P-001 (.200 ± .010)
2.54 ± .25 2.54 ± .25
(.100 ± .010) (.100 ± .010) 9.53 ± .25
(.375 ± .010)
2

2.54 ± .38
1/4-32 UNEF-2A 3 1 9.53 ± .25 (.100 ± .015)
THREADED PLASTIC
BUSHING (.375 ± .010)
4.75 MIN. FULL
MOUNTING (.187) THREAD
SURFACE DIA.
COMMON DIMENSIONS
.38 3.18 ± .05 3310C-101
(.015) (.125 ± .002) 2.54 ± .25 2.54 ± .25 Plastic Flatted Shaft
MIN. (.100 ± .010) (.100 ± .010)
STANDOFF
MOUNTING
5.97 ± .89 SURFACE
2.54 ± .25 (.235 ± .035)
4.83 ± .25 6.35 ± .08 2.39
6.35 (.100 ± .010)
(.190 ± .010) (.250 ± .003) (.094)
(.250)
MOUNTING
5.18 ± .38 12.70 ± .64 DIA.
(.204 ± .015) (.500 ± .025)

ADJUSTMENT SLOT 4.83 ± .38

.64 ± .10 (.190 ± .015) 6.35 ± .08
WIDE 4.83
(.025 ± .004) (.250 ± .003)
(.190)
MOUNTING DIA.
.76 ± .25
X DEEP 3310R-001
(.030 ± .010) 12.70 ± .64
2
(.500 ± .025)
FROM MOUNTING
.76 ± .05 X .76 SURFACE
R HIGH
(.030 ± .002 X .030)
ANTI-ROTATION 3 1
BOSS

2.54 ± .25 2.54 ± .25

.38
(.100 ± .010) (.100 ± .010)
(.015)
MIN.
STANDOFF
7.62 5.97 ± .89
(.300) .51 (.235 ± .035)
4 PLACES
DIA. MOUNTING 4.78 (.020)
SURFACE (.188)
The shaft flat position as shown above is at 50 %
of the mechanical travel.
MOUNTING HOLE PATTERN
2.54 ± .25
4.78 (.100 ± .010)
(.188)
6.53 ± 0.03
1.70 ± 0.03
(.257 ± .001) MM
(.067 ± .001)
DIA. DIMENSIONS:
DIA. (INCHES)

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.
 3310 - 9 mm Square Sealed Panel Control
Product Dimensions

COMMON DIMENSIONS 3310P-025 *

3310-002 Bushingless
Metal Bushing 7.62 ± .20
DIA.
(.300 ± .008)

1/4-32 UNEF-2A 6.35 ± .20

6.35 ± .08 DIA.
THREADED METAL (.250 ± .008)
BUSHING (.250 ± .003)
MOUNTING DIA. .38
MOUNTING
SURFACE (.015)
.38 MIN. STANDOFF
(.015)
MIN. STANDOFF

4.83 ± .25 .76

(.190 ± .009) (.030) .51 ± .10
(.020 ± .004)
6.35
(.250) 5.18 ± .64 5.59 ± .38
6.35 ± .64 12.70 ± .64 (.204 ± .025) (.220 ± .015)
(.250 ± .025) (.500 ± .025)

.76 ± .05 X .97

R HIGH
(.030 ± .002 X .038) 7.62
ANTI-ROTATION
BOSS (.300)
.38
DIA. MOUNTING
SURFACE (.015)
MIN. STANDOFF

.38
(.015)
MIN.
STANDOFF

.51
2 PLACES
(.020)

3310C-002

MM
DIMENSIONS:
(INCHES)

5.08 ± .51
B C A (.200 ± .020)

NOTE: * Only recommended shaft length

for bushingless version

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.
 3310 - 9 mm Square Sealed Panel Control
Product Dimensions
COMMON DIMENSIONS 3310H-025* 3310H-002
3310H-003 Pot/Pot Dual Cup Pot/Pot Dual Cup
Pot/Switch Dual Cup Bushingless Metal Bushing
Plastic Bushing
9.53 ± .25 3 2 1 3 2 1
PRIMARY PRIMARY
(.375 ± .010) ELEMENT ELEMENT
3 2 1
PRIMARY
ELEMENT
9.75 ± .38
(.383 ± .015) SECONDARY SECONDARY
6 5 4 ELEMENT 6 5 4 ELEMENT

.38
B C A SWITCH
(.015) .48
MIN. (.019) 2.54 ± .25
STANDOFF 4 PLCS. (0.10 ± .010)
ANTI-ROTATION LUG
2.54 ± .25
(0.10 ± .010) 1/4-32 UNEF-2A
THREADED
MOUNTING METAL BUSHING
.51 ± .05 ANTI-ROTATION LUG SURFACE
DIA. MOUNTING .38 7.62 ± .20 3.18 ± .05
(.020 ± .002) SURFACE 1/4-32 UNEF-2A DIA.
TIN PLATED (.015) (0.30 ± .008) (.125 ± .002)
.38 THREADED MIN. MOUNTING
COPPER PINS PLASTIC BUSHING DIA.
(.015) STANDOFF SURFACE
7.62 MIN. 3.18 ± .05
TYP. STANDOFF
(0.30) (.125 ± .002)
DIA.
5.08 ± .25
(0.20 ± .010) .76
(.03)
6.35
.36 ± .10
6.35 (0.25)
5.97 ± .89 (0.14 ± .004)
1.14 (0.25) 5.97 ± .89
TYP. (.235 ± .035) 7.62 ± .64 12.70 ± .64
(0.045) 12.70 ± .64 (0.235 ± .035)
5.59 ± .38 (0.29 ± .025) (0.50 ± .025)
7.54 ± .64 (0.50 ± .025) (0.220 ± .015)
(0.297 ± .025) .69 ± .10 .76 ± .08
ADJ. SLOT WIDE X DEEP
.64 ± .10 .76 ± .08 (.027 ± .004) (.03 ± .004)
ADJ. SLOT WIDE X DEEP
(.025 ± .004) (.03 ± .004) 6.35 ± .08
MOUNTING DIA.
6.35 ± .08 (0.25 ± .003)
(0.25 ± .003)
MOUNTING DIA.
Pot/Pot Dual Cup Pot/Switch Dual Cup

2 2
PRIMARY PRIMARY
CCW 1 3 CW CCW 1 3 CW
CLOCKWISE CLOCKWISE

5 WIPER C COMMON
SECONDARY SWITCH
CCW 4 6 CW CCW A B CW
CLOCKWISE CLOCKWISE

MM Pot Single Cup

DIMENSIONS:
(INCHES)
2
PRIMARY
NOTE: * Only recommended shaft length CCW 1 3 CW
for bushingless version CLOCKWISE

REV. 08/12
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.