R&D by REDT

http://www.redt-magic-engraver.com
3F, (1314 Gwanpyeong-dong) 13-10, Techno 2-ro, Yuseong-gu,
Daejeon, Republic of Korea, 305-709
TEL: +82-70-7011-0905 FAX: +82-42-673-0905
Contents
Cautions for Use 3
Product Parts and Installation 5
1) Parts and Accessories ........................................................................................ 5
2) Specifications ..................................................................................................... 7
3) MagicArt S/W Program Installation .................................................................... 8
4) MAGIC-70 Installation ...................................................................................... 10
5) Description of MAGIC-70 ..................................................................................11
6) How to Use the Clamp ..................................................................................... 18
7) Changing Tools................................................................................................. 25
8) Replacing the Spindle Belt ............................................................................... 27
9) Tension ............................................................................................................. 27
Program Usage Description 29
1) Toolbar .............................................................................................................. 32
2) Registration information of Character object .................................................... 47
3) Registration information of rotation .................................................................. 52
4) How to engrave for each tool path ................................................................... 53
5) Create tool path ................................................................................................ 54
5-1) Engraving option: Add/Delete/Edit ........................................................... 56
5-2) Add/Delete/ Edit tool ................................................................................ 57
6) Registration information of tool path ................................................................ 58
7) Transfer NC data .............................................................................................. 59
Engraving Process 61
Engraving Process of Ring inner/outer Diameter 67
Character Cutting Process 77
Engraving by Using Nose 84
Drilling 87
Image Engraving 91
Pen Engraving Process 94
Curved Materials Engraving 98
Entering Characters placed in a Circle 99
Entering Characters in a Curve 102
Preview Font 103
Change Texts 104
Create Template 105
Saving as Design Sample 107
Auto Change of Serial Number 109
Add and Edit Picture 111
1) Add picture ................................................................................................. 111
2) Convert and edit picture file .......................................................................113

1
Import a File in SVG Type 115
Origin Point Calibration 117
1) Tool Calibration (touch) ...................................................................................117
2) Probe Calibration ............................................................................................119
3) Laser Pointer Calibration ................................................................................ 120
4) Saving Multi-performance Clamp Origin Position .......................................... 124
5) Saving New Clamp Origin Position ................................................................ 125
6) Chuck Finger Origin point .............................................................................. 126
7) Rotation Clamp Origin point (Z axis) .............................................................. 126

2
Cautions for Use
Please be sure to read and follow the instructions below for safety use.
 The instructions below are intended to prevent personal injury and property damages.
 Please read carefully and use the machine properly.

If you don’t follow these instructions, injury or property damage may occur.

If you don’t follow these instructions, users may be seriously injured.

 Cautions related to power

Do not use damaged cord or Do not put multiple power plugs
loosened outlet. into one outlet simultaneously. It
 It may cause electric shock or may cause fire due to overheated
fire. outlet.
Do not pull a plug by the cord. Do If you are not going use this
not touch a power plug with wet product for a long time, pull out
hands. the power plug.
If smoke comes out from the
engraver during use, turn off the
engraver immediately and call the
sales agency or our service
center.

 Cautions related to use

Do not use this machine in a place Do not put a candle or cigarette
with oil, smoke, humidity, dust or butt on the engraver. Avoid any
water. heating apparatus like heater when
 It may cause electric shock or using this machine.
fire.  It may cause failure or fire due
to overheating.
Be sure to use the engraver body
only on a stable level surface.
 The engraver weights about 28kg,
and it vibrates left and right
during operation. Therefore, if you
use this machine on an uneven
surface, it may cause damage to
the surface and products, and
injury to users.

3
 Cautions related to use
Do not allow any part of body or Do not put water or small metal
other objects onto the engraver. materials on the engraver.
 The cutter of engraver may  Due to negligence or vibration
cause serious injury during its of the engraver, the materials
operation. may fall and cause injury, fire
or failure by overheating or
short circuiting.
 If water gets into the product,
it may cause electric shock or
fire.
Be sure not to be caught or Laser Radiation
jammed between the paths of Avoid eye or skin exposure to
each axis of the engraver, or direct or scattered radiation.
scratched by the engraving cutter. Class 1 laser product.
 It may cause serious injury, or
damage or failure of the
engraver.

 Other cautions
Do not disassemble or modify the Be sure to keep out of the reach of
engraver. toddlers and children. Their
 It may cause fire, electric curiosity or carelessness may
shock or failure. Please cause injury.
contact the sales agency or
our service center for
Inspection, calibration and
repair.
During winter, when temperate are
fall below the freezing point, the
product may not be normally
perform. In this case, please keep
the temperature in the place where
you use this engraver for normal
operation. Please make sure the
temperature in the place where
you use the engraver does not fall
below the freezing point.

4
Product Parts and Installation
1) Parts and Accessories
MAGIC-70 product box includes the engraver and following accessories.
Accessories Photos Qty Purpose

Diamond tip Tool for engraving. And ring outer diameter

1EA
(4Φ) engraving. (Spindle)

Diamond tip Tool for engraving. And ring inner diameter

1EA
(3.175Φ) engraving. (L-Tool)

Endmill cutter
2EA Tool for cutting. (Spindle)
(4Φ 0.6)

1.5mm wrench 1EA For changing tools.

2mm T-wrench 1EA For changing tools.

Spindle belt Silicon belt for transferring DC motor’s

3EA
(60Φ) rotation power to spindle.

Pin 6EA For holding of irregular shaped material.

Auxiliary jig 1SET For holding thick engraving materials

Multi-
performance 1EA For holding materials in place.
clamp

For holding materials in place.

Cutting clamp 1SET
(Including Bakelite plate)

Pen clamp 1EA For holding pen.

Tool top loading

2EA
adapter

Finger skin 1SET For protect chuck fingers.

Pen finger 3EA For holding pen.

5
 Jig for holding rings when engraving ring’s
Flat chuck finger 3EA outer diameter or inner diameter of flat
rings.

Round chuck
Jig for holding rings when engraving ring’s
finger 3EA
inner diameter.
(Wide width)

Round chuck
Jig for holding rings when engraving ring’s
finger 3EA
inner diameter.
(Narrow width)

Jig for holding fingers when engraving

Bangle adapter 3EA
materials (Bracelets) of a large diameter.

Chuck handle 2EA Rotation clamp tightening handle.

Finger spanner 1EA Tool for tightening fingers.

Nose
1EA For depth regulating.
(6Φ)

Tools holder 1EA Storage for tools.

WD-40 1EA Cutting oils for cutting metal materials.

Power adapter 1EA DC 24V power supply (24V, 2.5A)

USB cable 1EA For connecting to PCs.

Program CD 1EA MagicArt, Design and engraving S/W.

User’s manual 1EA User’s Manual.

6
※Optional(Separately purchased)

Flat clamp 1EA For holding material in place.

2) Specifications

Power supply 100~220V

Consumption
60W
voltage
Operating range Flat : 140mm(X) x 100 mm(Y) x 38.5mm(Z)
Rotary: (X)
Cylinder outside diameter: Max.93mm
Cylinder inside diameter: Min.13mm~Max.93mm
Resolution 0.005mm (X,Y), 0.00125(Z)
Weight 31.15Kg
RPM 9,000~15,000 RPM
Transfer speed 1 – 36mm/sec (X,Y), 1 – 18mm/sec (Z)
Temperature 5 – 40 ºC
Humidity 10 - 90 %
Purposes Metal engraving, Ring inner diameter, Ring outer diameter engraving,
Character cutting.

7
3) MagicArt S/W Program Installation
Place the CD in your computer`s CD driver, Follow the below instructions to install the S/W. Install program will be
automatically executed and program installation will be progressed in the following order. If Install program is not
automatically executed after CD is entered, execute Install program on My Computer’s CD drive.
1. Setup wizard 2. Select installation folder

3. Confirm installation 4. The file is copied onto the hard disk.

5. Click “Close” button to complete program 6. Once program installation is completed, USB
installation. driver Install window appears. Click “Yes”
button after taking out USB cable.

7. Click “Next” button. 8. Click “Finish” button to complete installation

and re-boot the computer.

8
◈ Program description

Once the program is installed, the icon below will be created on the desktop. The description of the icon is as
follows.

This is software for design and engraving with features like engraving contents design,
tool path creating and tool path data transfer.

◈ Select engraver

After installing the program, run the magic art program. Then, the engraver selection window appears as below.
(When running the program for the first time after installation)
Select the “MAGIC-70”, and click “OK” button. (Multiple selection available)

The engraver selection window can be opened any time through "Tools→ Select engraver in use..."
from the menu. If necessary, multiple selections with other engravers will be allowed.

9
4) MAGIC-70 Installation
MAGIC-70 is a desktop CNC(Computerized Numerical Control) engraver. This engraver cannot be operated
independently. You need your machine to be connected to a PC and run with a provided program, in order to
reform engraving work as you want.

Insert the provided USB cable into the port on the rear side of the engraver and the USB port of your computer
respectively.

[USB cable]

Connect to the engraver machine Connect to a PC

USB port
This is for connecting USB devices.

10
 5) Description of MAGIC-70

◈ Parts

A
J
K
B
L
C
M
D
N
E P
Q
F
O
R
G

H
I

◈ Description of each part

A Spindle Tightens an engraving tool.

B Probe Measures a height of engraving material.
C Tool Length Sensor Measures the height of tool.
D Pen Clamp Adapter Inserts and holds a pen clamp.
E Multi performance Clamp Fix the material in place.
F Clamp Fastening Lever Loosens or fastens the clamp.
G Emergency Switch Conduct emergency stop.
H RPM Adjustment Knob Adjusts RPM of engraving tool (9,000~15,000 RPM).
I Power Switch Turns ON/OFF the machine.
J L-Tool Tightens the tip used for rings or bangles.
K Pressure Adjuster Adjusts the pressure of the engraving tool.
L L-Tool Lock Tightens or adjusts the L-tool.
Rotation clamp
M Tightens a cylinder the materials such as rings.
(Rotary chuck)
N Clamp tightening handle Loosens or tighten the materials
O Operation key Operates the engraver’s various functions.
P 5V Port Supplies 5V to the engraver by connecting to power adapter.
Q Power Port Supplies 24V to the engraver by connecting to power adapter.

11
R Communication port Connects USB cable to the computer.

12
◈ Description on Keys

Once this button is pressed during engraving, all operations

STOP
in progress will stop.
If you press and hold the button, it enters into tool settings
VISE mode. If you lightly press the button, the clamp moves back
and forth.
If the button is lightly pressed, the laser point is moved to
round chuck finger Origin point.
ROUND CHUCK
If the button is pressed and held for more than one second
FINGER
after the round chuck finger Origin point is changed, then the
changed Origin point will be saved.
If the button is lightly pressed, the laser point with be moved
to flat chuck finger Origin point.
FLAT CHUCK
If the button is pressed and held for more than one second
FINGER
after the flat chuck finger Origin point is changed, then the
changed Origin point will be saved.
Make rotation clamp rotate.
DIRECTION KEY(A) ※During the rotation, it stops when it reach 0°, 90°, 180° or
270° location.

DIRECTION KEY(Z) Move Z axis to up and down

POINTER Turns laser pointer ON/OFF.

If this button is pressed and held for more than one second
START after engraving, then the data is sent and the area is
designated, engraving will start.
If the button is pressed and held for more than one second
SAVE after the tool setting is changed, then the changed setting
value will be saved.
Enter the menu.
MENU ※ Please consult with engineers before to use this
function.
It moves the tool or laser pointer.

DIRECTION(X, Y) During engraving, press button to raise the speed by

one level, and press button to slow down.

13
 CLAMP Moves the Multi-performance clamp.

RING OUTER Moves the ring outer diameter engraving position of the
DIAMETER rotating clamp.
RING INNER Moves the ring inner diameter engraving position of rotating
DIAMETER clamp

◈ Engraver movement

When the engraver is turned on, the engraver begins the self-test in the following order, and it enters into waiting
mode with confirmation sound if there is no problem.

(1) The order of self-test when the machine is turned on

1) If a certain axis is detected by the sensor, move to leave from the detected area.
2) Check probe sensor and return to the Origin point
3) Check Z-axis sensor and return to the Origin point
4) Check X-axis sensor and return to the Origin point
5) Check Y-axis sensor and return to the Origin point
6) Wait for confirmation sound

(2) The sequence of instruction for engraving set up

1) Turn on the engraver.
2) Place to secure the materials to be engraved on the clamp of the engraver.
3) Run the design software (provided with the product).
4) Prepare the contents of engraving.
5) Press the engraving button on the program to transfer intended data to the machine.
6) Press the start button on the machine to begin the engraving process.

14
◈ Description on Menu

If press the button, entering to the menu mode. It is same function of operation keys. Press and hold the

button for more than 3 seconds to enter each menu.

Exchange the tools.

Check XY coordinate.
※If the machine is restarted, set value is reset.

Check Z coordinate.
※If the machine is restarted, set value is reset.

Check A coordinate.
※If the machine is restarted, set value is reset.

Select the measurement

option the material’s height.
Surface Height/ Horizontal, Shape

Verticality, Shape/ Surface Slope

When repetitive work, Select

the measurement option of
material height and engraving
area.
1. Skip the all measurements.
2. Measure the height.
3. Check the all measurements.

Select how to check the

engraving area before starting
to engrave ring inner diameter.

Spindle test is running.

15
 ON 5V output of
the machine.
※ The port on the backside of

machine can output 5V. It can control the power of buzzer,

vacuum device, etc.

Select the language.

Select the calibration mode.

1. Origin No: 0(Center)~8

User can set and save your own origin.

2. Clamp No: 1~10

For each clamp, you can select 0 ~ 8 origins.

10 clamps can be saved at the maximum.

※The menu cannot be shown in the ring inner/outer diameter

mode. You can use it in flat mode.

Set revolution and speed to spin the rotary chuck.

※ Millgrain tool cab engrave repeated patterns on the ring

outer diameter.

※Millgrain tool is not included. You can purchase at store.

16
◈ Measurement Select

User can select measurement mode within two seconds before measurement begins, after transferring tool path
(engraving data) from MagicArt to the machine.

: Select Measurement Mode

: Select Probe/Touch

Measure the origin of engraving area.

Measure the beginning point.

Measure whenever tool moves and meet the material.

※ “Z Clearance” should be set enough large value when setting the tool path

to avoid damage material.

Measurement Method Select.

If you select probe, “Measure the origin of engraving area” mode is
automatically selected and the others cannot be selected.

17
6) How to Use the Clamp
◈ Multi performance Clamp

The holding part of clamp is step type, so set the clamp to the step to match the size and thickness are matched.
If you turn the clamp handle to the left, then the clamp will be loosed and turn it to the right, then the clamp will be
tightened.
When holding the materials by turning the clamp tightening handle, a mark may be left on the
materials.

◈ Adjusting the Height of the Clamp

The height of the clamp can be adjusted depending on the thickness of the materials or the type of clamps.

Turn the clamp knob upward to Remove the spacer block. Insert the clamp.
pull out the spacer block.

◈ How to use the pin

Pin holes on the clamp ensures easier holding of irregular shaped material.

◈ How to use the gradation on the clamp

Gradation on the clamp also helps easier positioning of material on the clamp.

18
◈ How to attach the auxiliary jig

The auxiliary jig helps to hold thick materials like a beer bottle. As a pair, the Auxiliary jigs are holed by bolts
on each hole.

◈ Rotation Clamp(Chuck)

-Holding method for outer diameter engraving

Insert the ring until it clicks into the flat chuck finger and turn the chuck handle to hold the ring and not to allow it
come out or spin.

19
-Holding method for ring inner diameter engraving
Open the chuck finger of the rotation clamp and insert the ring, and use the chuck handle to hold it not to allow it
to come out or slip.
Ex) Flat chuck finger

There are three types of chuck fingers. According to the shape of ring, use chuck finger appropriately to
hold the ring and not allow it to become loose or fall.

Flat chuck finger Round chuck finger (wide width) Round chuck finger (narrow width)

- Chuck finger changing method

Use the chuck finger spanner provided along with the product to release or tighten the chuck finger.

20
If the thickness of ring is not even, mix different sized chuck fingers to hold it.

21
- Materials holding methods for engraving bracelets
Place three bangle adapters in the rotation clamp, and tighten the chuck finger in front of the bangle adapters.
Open the rotation clamp to match it to the bracelet size, and insert the bracelet until it clicks into the chuck finger.
Use the chuck handle not to make bracelet come out or spin.

Chuck Finger Bangle Adapter

◈ Pen Clamp

1. Turn the clamp knob on the left side of the clamp and pull the clamp and spacer block to take it out.

2. Place the pen in the flat chuck finger of the rotation clamp, and insert the pen clamp into the pen clamp adapter.
Push the clamp until it touches the pen fixed in the chuck finger. Tighten the bolt on the pen clamp adapter not the
pen clamp to be pushed, and tighten the bolt of the pen clamp to securely hold the pen.

22
◈ Cutting Clamp

Release four tightening bolts on the cutting clamp, and insert the Bakelite plate. Put materials on the Bakelite plate
and tighten with bolts. Open the clamp wide at the maximum, and put the clamp dedicated to cutting on it, and
tighten it.
[Cutting exclusive clamp]

1. Turn the clamp knob on the left side of the clamp. Turn the clamp tightening handle for widen the gap of clamp.

2. Insert the cutting clamp, and tighten the clamp by turn the clamp tightening handle.

23
◈ Flat Clamp (Separately purchased)

※ Is secured on the base table by using 4 bolts at each corner of the clamp.

1. Turn the clamp knob on the left side of the clamp and pull the clamp and spacer block to take it out.

2. Insert the flat clamp, and tighten the clamp by turn the clamp knob.

24
7) Changing Tools
◈Spindle

1. Press button and go to the menu mode.

2. Press button, and when menu appears on the LCD window, then press

and hold button until it beeps (more than 3 seconds) to run the menu.

3. Just like the below figure, insert it to 1mm wrench on tool fixing bolt. Turn wrench to the left and loosen bolt.
Grab tool by hands in advance in order that tool is not fallen on the bottom and pull out tool downward by pushing
tool from the top. After changing tool, tighten it by using wrench bolt and fix it

When loosing tool fixing bolts, hold the tool with your hands and loose the bolts to avoid
dropping the tool on the floor and causing damage to it.

4. Press the button until it beeps (more than 3 seconds) to measure tool’s lengh automatically.

◈ L-Tool

Just like the below figure, insert it to 1mm wrench on tool fixing bolt. Turn wrench to the left and loosen bolt.
Grab tool by hands in advance in order that tool is not fallen on the bottom and pull out tool downward by
pushing tool from the top. After changing tool, tighten it by using wrench bolt and fix it.

25
26
8) Replacing the Spindle Belt

The spindle belt transfers the rotation power of the spindle motor to the spindle to turn the
engraving blade. If the spindle belt is worn, the surface is cracked and slippery. So it cannot
deliver the power of the spindle motor properly. In this case, the number of rotation decreases,
or it causes poor engraving quality.
Replacement Cycle:
The lifespan of the spindle belt varies depending on usage and conditions. Generally, it should be changed every
2-3 months.
Spindle Belt Replacement Method
There is a red rubber belt on the front head of the engraver. Replace this belt with new belt.

Spindle belt

9) Tension
◈ Setting Engraver Pressure Lock

When cutting materials or engraving materials with a V cutter, set the head and remove the pressure lock. Then,
vibration during engraving will be reduced and it will improve the quality of engraving or cutting and extends the
life cycle of the tool. Release the bolts as shown in the picture below and insert the hole in the back and turn it to
tighten.

After that, when engraving with the Carbide tip tool, it needs more pressure. So this bolt should
be released and moved to the left hole.

27
◈ Pressure Adjuster

When engraving with a Carbide tip, the engraving depth is adjusted with pressure. This is the using same as the
engraving depth selection when creating the tool path. If you turn the tension adjustment knob to the right, the
pressure increases stronger, and turning it to the left, decreases the pressure.

28
Program Usage Description
Run the program, then a window show up as below. The program window is different between when an object is
selected and not selected. The names of parts for each case are as follows.

◈ Program screen Menu

Template category
Toolbar

Template list

Work area
Design sample

인 샘플

◈ Character input mode

Press [Text Input] button and click the screen or double click mouse left button on the selection mode
to switch to character input mode.

Character registration information

Cursor (character input mode)

29
30
 ◈ Object selection mode

After entering texts, click [Selection] button with a mouse or click the work area with mouse right button. Then,

the entered character object is selected and it turns into selection mode. Double click mouse left button in the
selection mode to convert it into character entering mode.

Object registration information

Select object

◈ Object rotation mode

If the selected object is clicked once more with the mouse, the mode will be converted to the object rotation mode.

Rotation registration information

Object rotation mode

31
1) Toolbar

◈ Alignment tools

[Line/Curve]

Click a certain point with the mouse and move it to make a dot line appear.
Designate the distance and click with the mouse and then press the right
button on the mouse to create a straight line. At this time, press “Ctrl” key on
the keyboard and move the mouse to create a horizontal line or a vertical
line.

Click on a certain point with the mouse and designate a distance. Drag while
clicking and holding the mouse to make a curve appear. Press the right
button on the mouse to create the curve.

[Circle/Ellipse/Pie]

Click and hold the work area with the mouse and drag it to designate the size
of a circle. At this time, press “Shift” key and drag it to create a perfect circle.

Click button on the circle object registration information to transform

into an arc. The starting/ending degree can be designated and those degrees
can be adjusted by dragging The starting/ending degree of the arc with the

mouse. At this time, click button to create a reversed

image.

Click button on the circle object registration information to transform

into a pie (a filled arc). The starting/ending degree can be designated and
those degrees can be adjusted by dragging The starting/ending degree of

the pie with the mouse. At this time, click button to

create a reversed image.

[Adds a rectangle]

Click and hold the work area with the mouse and drag it to designate the size
of a rectangular.
At this time, press “Shift” key and drag it to create a square.

32
 Determine the curvature of each edge on the rectangular object registration
information or drag the rectangular edge with the mouse to transform it into
a round rectangle with round corners.

Click button on the rectangular object registration

information and adjust the curvature of each corner individually.

[Polygon]

Click and hold the work area with the mouse and drag it to designate the size
of a polygon.
At this time, specify the number of vertical on the polygon object registration
information to change it.

[Mirror]

Left/right reverse the selected object.

[Rotation]

If the selected object is clicked once more with the mouse,

it will convert to the object rotation mode. Then, rotate the
object by dragging it with the mouse or arrow keys on the
keyboard.

[Invert color]

Reverse the color of the selected object.

[90˚CW]

Rotate the selected object by 90˚.

33
[Vertical center in page]

[Horizontal center in page]

[Center in page]

Align to the left of base object

Align to the center of base object

Alignment Align to the right of base object

Align to the top of base object
Align to the center of base object
Align to the bottom of base object
Adjust horizontal gap Distribute horizontal gap
Adjust vertical gap Distribute vertical gap
Distribute width
Same size Distribute height
Make same size
Bring to front
Order
Send to back

34
[Left top Origin point]

[Left bottom Origin point]

[Center Origin point]

35
◈Object tools

[Template]

Either import a template or save the currently selected object as a template.

What is a template?
Template is an image of materials to be engraved. The engraving is actually done as same as
the design on the template.
Template is not selectable by mouse, but you can select it by dragging it while pressing “Shift” key
on a keyboard.

[Design sample]

Import design sample or save current object as design sample.

What is a design sample?

It means design objects saved in the design sample library. The design sample can be always
easily and quickly imported from the design sample library and freely edited.

36
 [Selection]

It is available either to select the object created in the work area to adjust its size and location or to change the
object’s property. Only the selected objects are subject to changing their location/size/size and engraving. In
the character input mode, converting to any selection mode easily by pressing the right button of the mouse.

[Select object] [Select no object]

[Text input]
If button is pressed and then the work area is clicked with the mouse, characters can be entered. Double
clicking the left button of the mouse in the selection mode is an easier way to convert into the character input
mode.

Cursor (Character input mode)

Press button and drag a character to be edited with the mouse for partly selection. Then, adjust its font
and size.

[Mouse drag]

[Circular text]

Create character objects along a circle.

37
 [Drawing pen]

You can draw by dragging the mouse.

The thickness of drawing line can be adjusted in the drawing object information window.

[Image]

Import image (bmp, jepg, gif, png … etc.)

[Line eraser]

Clear the line of object.

Move the mouse over the line of object. The line will be removed (Some objects cannot be removed with the
Clear line tool)

38
 [Cutting tool path]

Create a tool path that will engrave the selected object’s border.

[Hatching tool path]

Create a tool path that will engrave the inside of the selected object.

[Single line tool path]

Create a tool path that will engrave the center line of the selected object.

[Text input engraving tool path]

Create a tool path that will engrave the inside of the selected object with dots.

[Simulate tool path cut]

The prospected image of the result of tool path processing done by the selected tool is shown.
The following is an example of the cutting tool path that uses 0.6mm End mill.

39
 [Show tool path only]

Only tool path is shown on the screen with temperately masking all of other objects. If this button is pressed
once again, all objects will be seen again.

[Instant engraving]

Immediately engrave the selected object without creating a tool path. Select an engraving method from the
engraving selection list on the Engrave window and select engraving options and measuring methods before
clicking “Start Engraving” button.

[Engrave]

Engrave the selected tool path.

40
◈ Basic tools

[New document]

Open a new file

[Open]

Import a file save in *.dgn.

Select a file on the “Open” window and click “Open” button.

41
 [Save document]
Save the design drawn on program by ” *.dgn.”
Chose the location (folder) in which the file will be saved and enter the file name before clicking “Save” button.

[Print]
Print the design drawn on program.

[Cut]
Cut the selected object.
If Ctrl+X is pressed on the keyboard, the same function will be executed.

Ctrl + X Ctrl + V

42
 [Copy]
Copy the selected object.
If Ctrl+C is pressed on the keyboard, the same function will be executed.

Ctrl + C Ctrl + V

[Multiple paste]
If more than one of the same object is needed, multi-copy the object in several constant gaps by clicking Edit
menu → Copy → Multiple Paste….

[Paste]
Paste the cut or copied object.
If Ctrl+V is pressed on the keyboard, the same function will be executed.

43
 [Undo]

Return the work recently done to its previous state.

The number of undo stage can be adjusted with Tools → Option → General.

Change font Undo

[Redo]

Re-execute the undone work.

Change font
Undo

Redo

44
◈ Screen Zoom In/Out/Move Tools

[Zoom in]
The screen is zoomed in by one level.

[Zoom out]
The screen is zoomed out by one level.

[Zoom in/Out ratio]

If any screen ratio is selected, the screen in the size of the selected ratio will be seen.

45
 [Magnifier]
Drag a certain spot with the mouse to enlarge it.

[Fit to object]
Enlarge the selected object to make it filled with the screen.

[Fit to page]
Adjust the page size to see the whole work area.

[Panning]
Drag the screen with the mouse to move it.

46
2) Registration Information of Character Object
If any character object is selected, the registration information of character object will appear in the left of the
screen.

[Font]

Designate font.
Either click the font’s arrow or click Preview button to designate font.

[Size]

Adjust the size of the selected character size. Either press the size arrow button to select or press
[size] button to adjust the size by one level.

47
 [Bold]

Change character style to bold.

[Italic]
Change the character style to italic.

[Reduce or increase font weight by one level]

Adjust the weight of font.

[Symbol]
Insert symbols.

48
 [Text change]

The entered text of the selected object can be displayed and changed. Press button to change the text

more easily.

Align characters to the left in the text box.

[Align to left]

Align characters to the center in the text box.

[Align to center]

Align characters to the right in the text box.

[Align to right]

Align characters to the both direction evenly in the text box.

[Both]

49
 Align characters to the top in the text box.

[Align to top]

Align characters to the center in the text box.

[Align to center]

Align characters to the bottom in the text box.

[Align to bottom]

Arrange characters horizontally.

[Horizontal text ]

Arrange characters vertically.

[Vertical text]

Move the selected character horizontally (left, right).

Move the selected character vertically (up, down).

Adjust the width of the selected character.

50
 Rotate the selected character.

Location of the selected object

Size of the selected object

Line thickness of the selected object

Line type of the selected object

Line color of the selected object

Color filled inside of the selected object

Type of filled inside of the selected object

51
3) Registration Information of Rotation

Rotate the selected object by one degree. Enter the desired angle of

rotation, and press button, then the object is rotated by the angle you

enter.

Rotate the selected object at the same degree as entered.

Rotate and add a new object at the same degree as entered

52
4) How to Engrave for Each Tool Path

[Content]

Engrave the border of characters. Engrave the inside of characters.

Cutting Hatching

Engrave the surface of characters

Engrave the center of characters.
character with dots.

Single line

53
5) Create Tool Path

Hatching gap, depth, engraving speed and others are pre-set for each
engraving option. Therefore, it is not necessary to designate hatching gap,
Preset
depth, engraving speed and others every time and they will be automatically
set with their pre-set values. Each engraving option value can be changed by
pressing Edit or Add button on the Set engraving option window.
Designate a tool to be used for engraving. Each tool setting value can be
Tool
changed by pressing Edit or Add button on the Set tool window.
The followings are shown only on hatching tool path.

A tool path is created in the horizontal direction

Direction

A tool path is created in the left diagonal direction .

A tool path is created in the right diagonal direction

A tool path is created in the cross hatched direction .

Engraving: It does not mean the actual engraving depth but refers to “Applied
Depth pressure” and the higher depth value is, the bigger the applied
pressure is.
Cutting: Designate an engraving depth actually used for using rotation tools.

54
 If engrave border is cancelled, a tool path will engrave only the inside of the
character created.
Engrave outline

When moving to another engraving location, it is necessary to lift Z axis to

Z Clearance
prevent the tool from contacting with the material surface before moving. For
this, designate the height to be applied at this time.
XY axis speed Designate a speed at which XY axis will move during the engraving.
Z axis speed Designate a speed at which Z axis will move during the engraving.
Designate hatching gap.

Hatching interval

0.1mm 0.2mm 0.3mm

Designate a margin between object outline and tool path.

Margin

0.1mm 0.2mm 0.3mm

Show briefly Only engraving option, direction and tool of the tool path are shown.
Transmit Transfer tool path window is displayed

55
 5-1) Engraving Option: Add/Delete/Edit
If Select engraving option is checked, Add/Delete/Edit buttons will appear.

Enter a name to the engraving option setting window and designate hatching gap, engraving depth
and speed before clicking “OK” button. They will be added to the engraving option selection list.

Select an option to be deleted and click “Delete” button to delete the option from the list.

Select an option to be modified and click “Edit” button. If “OK” button is clicked after a setting value
is modified on the option setting window, the modified setting value will be saved.

56
 5-2) Add/Delete/ Edit Tool
If “Edit” button is checked, Add/Delete/Edit button will appear.

Designate the name of a tool to be added along with its type, end width and click “OK” button. The
tool will be added to the tool selection list.

Select a tool from the list and click “Delete” button to delete the selected tool from the list.

Select a tool to be modified and click “Edit” button. If “OK” button is clicked after a setting value such
as edge width is modified, the modified setting value will be saved.

57
6) Registration Information of Tool path
If tool path object is selected, the registration information of tool path window will appears in the left of the
screen to allow the user to adjust its depth and speed once again.

Engraving: It does not mean the actual engraving depth but refers to “Applied
pressure” and the higher depth value is, the bigger the applied pressure
Depth
is.
Cutting: Designate an engraving depth actually used for using rotation tools.
XY speed Designate a speed at which XY axis will move during the engraving.
Z speed Designate a speed at which Z axis will move during the engraving.
When moving to another engraving location, It is necessary to lift Z axis to prevent
Z Clearance the tool from contacting with the material surface before moving. For this,
designate the height to be applied at this time.
Z Dwell Time Designate time gap before Z axis touches the material and it is moved.
Engrave twice Engrave the design twice.

The location of the selected tool path appears. Click the arrow button to
move the location.

The overall size of the selected tool path appears. Click the arrow button
to change the size.

58
7) Transfer NC data

Transfer the selected tool path to the engraver. Select a tool path object and click button to

make the transfer NC data window appear. Select a measuring method and click “Start engraving” button.

Measure material height only.

Surface height

Measure material’s horizontal gradient.

Horz. slope

Measure material’s top, bottom, left and right gradient.

Surface slope

Do not measure its height. In this case, the height previously measured can
Skip be used. If the material is not removed from the clamp during the previous
engraving work, the measuring time can be saved with this option.
Designate whether to re-adjust the engraving location. If this option is
Adjust engraving selected, the laser pointer will be turned on to allow the user to adjust the
Position engraving location before engraving. If this option is not used, engraving will
begin immediately.

59
 Measure material height.

Surface height

Multi point Measure material height by dividing the whole material into several parts(up
measurement to 5 times)
Outside Engrave on the ring’s outer diameter.
Inside Engrave on the ring’s inner diameter.

Place the material to the flat chuck finger.

Place the material to the round chuck finger.

60
Engraving Process
Tool: Tip
Clamp: Multi performance clamp

1. Measure material to be engraved.

Vertical

Horizontal

2. Fix a material to be engraved to the center of clamp.

3. Select the template the most similar to the material to be engraved from the template category and enter the
size of the material before clicking “OK” button.

61
4. Once the template appears, press [Text input] and click any wanted location with the mouse to enter

characters.

5. Once entering characters is completed, press toolbar’s [Selection] and go to the select object mode to

select the entered characters. Then, edit the size, font and thickness of the object. If you want to allocate the

object at the center of the work area, click [Center in page] button.

62
6. Once the design is completed, click [Hatching tool path]. A tool path means a route along which a tool is

moved for engraving.

7. Select an engraving option and tool from “Hatching tool path” window and if necessary, designate gap and
depth before clicking “Create tool path” button.

63
8. “Tool path” object is created.

9. Click [Engraving] button.

10. Once “Output” window appears, specify how to measure the engraving materials. And then, click “Start
engraving” button.

64
11. Once the tool is moved to the center of the material and stopped, the engraving area can be verified and
adjusted by using the direction key button. At this time, check the laser pointer while moving it for easier
measurement and adjustment.

Whenever the direction key is pressed, move the laser pointer to the left, top, right
and bottom of the engraving area to show the area to be engraved. Check whether
the area to be engraved is outside of the materials surface. If so, adjust the location
by using the direction key.

The laser pointer moves the area to be engraved to the left, top, right or bottom
according to current location. If the current location of the laser pointer is left, then,

press key to move the area to the left.

Work area

12. After the location of engraving is decided, press and hold button until it beeps (more than 3 seconds)
to start the engraving.
13. User can select measurement mode within two seconds before measurement begins, after transferring tool
path (engraving data) from MagicArt to the machine.

: 측정 모드 선택

: 프로브/터치 선택

Measure the origin of Measurement Method

engraving area. Select.

65
 If you select probe,
Measure the beginning point.
“Measure the origin of
Measure whenever tool moves engraving area” mode is
and meet the material. automatically selected
※ “Z Clearance” should be set and the others cannot be
enough large value when setting the selected.
tool path to avoid damage material.

66
 Tool: Tip
Clamp: Rotation clamp

1. Measuring the width and diameter of a ring to be engraved.

Width

Diameter

2. Insert the ring into the chuck finger as below, and tighten the rotation clamp to set it.

Outer diameter Inner diameter

Since the character engraving direction is as shown in the picture below, check out the direction
of the materials and set it.
AB

67
◈ Ring (Bangle) Outer Diameter

1. Press button on the engraver. A message requiring removal of the clamp appears on the screen.

※ Proceeding without removing the clamp, a damage may occur in the clamp and other tools.

2. Remove the clamp by loosening the clamp tightening lever.

3. Press button after removing the clamp. A message shown below appears on the screen.

[Ring Outer Diameter] [Bangle Outer Diameter]

68
◈ Ring (Bangle) Inner Diameter

Use an L-tool to engrave ring or bangle inner diameter.

1. Press button on the engraver. A message requiring removal of the clamp appears on the screen.

2. Remove the pendant clamp by loosening the clamp tightening lever.

3. Press button after removing the clamp. A message shown below appears on the screen.

4. Loosen the L-tool tightening bolt by turning it in the direction shown in the following picture.

69
5. Adjust the height of L-tool to get a proper height for the engraving. With the L-tool at a proper height, fix it with
the L-tool tightening bolts.

Bangle inner diameter

Ring inner
diameter

The length of the L-tool fixture should be flexible to meet the shape of the bangle. Please
fix L-tool properly to the shape of the bangle.

6. Press button, a message shown below appears on the screen. Now all is done to start the work.

[Ring Inner Diameter] [Bangle Inner Diameter]

70
◈ Program Process

1. Double click “Ring” template in the object registration information.

2. When “Insert Rotary Object Template” window appears, enter the width and diameter of the ring measured and
click “OK.”

71
3. The template appears at the center of the screen.

4. Select [Text Input] from the menu, and click the work area using mouse and enter the characters to be

engraved.

72
5. After entering characters, press [Selection] in the toolbar to enter the object selection mode. Select the

character string, and edit the size and font of the object. If you want to place the object at the center of the work

area, click [Center in Page] button.

Handle to adjust
character gap

6. Once design is completed, click [Hatching Tool path] button.

73
7. Once “Hatching Tool path” window appears as shown in the picture below, select tool, tool path gap and
depth, and click “Create Tool Path” button.

8. The “Tool path” object is created as below and marked with red line on the screen. Turn the mouse wheel to
enlarge the tool path object, and if it is not the tool path you want, delete the tool path and extract it again by
adjusting the extraction option.

[Extract tool path ]

74
9. After selecting a tool path, click .

10. Once “Transfer NC data” window appears, specify Communication port and rotation clamp option. And then,
click “Start Engraving” button.

Measure material height.

Surface Height

Multi point Measure material height by dividing the whole material into several parts(up
Measurement to 5 times)
Outside Engrave on the ring’s outer diameter.
Inside Engrave on the ring’s inner diameter.

Set the material to the flat chuck finger.

Set the material to the round chuck finger.

75
11. Once the tool is moved to the center of the materials and stopped, the engraving area can be verified and
adjusted by using the direction key button. At this time, check the laser pointer while moving it for easier
measurement and adjustment.

Whenever the direction key is pressed, move the laser pointer to the left, top, right
and bottom of the area to show the area to be engraved. Check out whether the
area to be engraved is out of the materials surface. If so, adjust the location by
using the direction key.

The laser pointer moves the area to be engraved to the left, top, right or bottom
according to current location. If the current location of the laser pointer is left, then,

press key to move the area to the left.

Work Area

14. After location of engraving is decided, press and hold button until it beeps (more than 3 seconds) to
start the engraving.

15. Close the engraver cover.

76
Character Cutting Process
Tool: Endmill Cutter

Clamp: Cutting clamp

Other: Apply cutting oil on the surface of materials to improve engraving
quality and extend the lifespan of Cutter

Replace the tool with a cutting tool, and press the tool exchange button to measure the tool depth.
Also, be sure to set the head by tightening the engraver pressure lock. If you do not fix the head,
it may cause uneven engraving depth or damage to the tool.

.
1. Measure the thickness of a material to be cut.

2. Place and fix a material to be cut on the cutting clamp and place and tighten it on the clamp.

3. Press [Text Input] in the toolbar to enter the character input mode, and click the position of the work area you

77
want and enter the characters.

4. After entering characters, press [Selection] in the toolbar to select character string and designate the font.

Adjust the character to the size you want. Adjust the size by using an object handle as below, or adjust the size
from the left object registration information window.

Object Handle

78
5. Drag the character gap adjustment handle (a square in the picture below) with the mouse to narrow the gap
between the characters.

Adjust character gap

If the gap of some characters is partially adjusted, press [Text Input] button and drag the mouse to select what

you want. Drag a character gap adjustment handle by the mouse and adjust the character gap.

① ②

[Design character] [Press button and click with the mouse]

③ ④

[Select character] [Adjust character gap]

6. Once design is completed, click [Cutting Tool path]. A tool path means a route along which a tool is moved

for engraving.

79
7. Once the “Cutting Tool path” window appears as seen in the figure below, select cutting depth (material thickness
+ 0.1~0.2mm) and tool diameter and click “Create tool path.”

Designate the thickness for cutting. Since material may be bent or slanted, the
Depth
depth should be 0.1-0.2 mm deeper than the thickness for perfect cutting.

When cutting the engraving depth little by little, designate the depth. When cutting
Z Pitch
thick materials with a thin tool, it is useful.

XY axis speed Designate a cutting speed.

Designate a speed at which the tool punches and penetrates the material and
Z axis speed
descends during the engraving.

When moving to another engraving location, it is necessary to lift Z axis to prevent

Z Clearance the tool from contacting with the material surface before moving. To do this,

designate the height to be applied.

If the tool touches materials, the rotation speed will be slower. If moved quickly at

this time, the tool may be damaged. In particular, in case of metal materials, wait
Z Dwell Time
until the spindle rotation speed is restored to prevent damage to the tool. Enter the

delay time.

Transmit “Transfer tool path” window is displayed.

80
8. “Tool path” is created.

9. Click button.

10. Once “Output” window appears as seen in the figure below, specify how to measure Communication port and
material. And then, click “Start engraving” button.

How to measure a material

81
 Measure material height only.

Surface Height

Measure material’s horizontal gradient.

Horz. Slope

Measure material’s top, bottom, left and right gradient.

Surface Slope

Do not measure its height. In this case, the height previously measures can
Skip be used. If the material is not removed from the clamp during the previous
engraving work, the measuring time can be saved with this option.
Designate whether to re-adjust the engraving location. If this option is
Adjust Engraving selected, the laser pointer will be turned on to allow the user to adjust the
Position engraving location before engraving. If this option is not used, engraving will
begin immediately.

82
11. If the tool is moved to the center of the material and stopped, the engraving area can be verified and adjusted
by using the direction key button. At this time, check the laser pointer while moving it for easier measurement and
adjustment.

Whenever the direction key is pressed, move the laser pointer to the left, top, right
and bottom of the area to show the area to be engraved. Check whether the area
to be engraved is outside of the materials surface. If so, adjust the location by using
the direction key.

The laser pointer moves the area to be engraved to the left, top, right or bottom
according to current location. If the current location of the laser pointer is left, then,

press key to move the area to the left.

Work Area

12. After location of engraving is decided, press and hold button until it beeps (more than 3 seconds) to
start the engraving.

13. Close the engraver cover.

83
Engraving by Using Nose
Nose is a sub-component to support engraving along with the curved surface of material. Therefore, it is possible
to engrave on the curved surface of material with consistent depth by using the nose.

Tool: V cut tool

Clamp: Multi performance clamp, Rotation clamp

Be sure to release the engraver pressure lock. If you engrave with fixing head, the nose, tool and
materials may be damaged.

1. Replace the tool with V cut tool and conduct automatic measurement of tool length.

2. Turn the depth nose lock to left and loosen the bolt. Turn the nose height adjustment screw the left and lower it
down about 1~2mm.

Depth nose lock

Nose height adjustment screw

84
 It might be difficult to adjust the tool length if the nose height adjustment screw set to the top, so separate
it about 1~2mm from the head.

Head
1~2mm

Nose height adjustment

3. Assemble the nose height adjustment screw with the nose and turn the assembly to the right to make the nose’s
tool hole locate before the tool tighten bolt.

4. Put a flat plate (Ex: ruler) under the nose as shown in the picture below and release the tool fixing screw with
2mm wrench. Lower the tool until it touches the plate, and tightens the tool in place.

5. If the nose height adjustment bolt is rotated to the right, the nose will face to the top and the tool will be able
to be seen. At this time, the engraving depth is same as the height of the exposed tool. Adjust the length of
the tool to desired depth. (One revolution of the screw moves the tool 1mm up or down)
* If the engraving depth is 1mm on the tool path, and the tool length is by 0.3mm, then the actual engraving
depth will be 0.3mm.

85
6. Rotate and tighten the depth nose lock to the right not to make the nose height adjustment screw loosened.
If the depth nose lock is not fixed, the nose height adjustment screw might be loosened to change the
engraving depth or cause damage to the material, tool or nose.

7. Measure the length of tool at 7) Changing Tools (p.22 Spindle).

86
Drilling
What is Drilling?
It drills a hole with certain depth and diameter on materials by using endmill or V-cut tool. Depending on the tool
thickness, the whole size becomes different sizes.

Be sure to fix the engraver pressure lock. If the head is not fixed, the drilling may not be the
designated depth.

◈ Add drilling object

If a drilling object is added and the screen is clicked with the mouse, a drilling object will be created. Drilling options
of the created object such as drilling depth and speed can be changed on the object registration information
window on the left of the screen.

87
The drilling tool path object can be copied and used in several constant gaps by using Edit menu → Copy →
Multiple-copy.

Drag and move a drilling object with the mouse to drill it into various shapes.

88
◈ Fill Inside Object with Drilling Position

Select a shape to be filled with the drilled object. Click “Insert → Drill → Fill Inside Object with Drilling Position
…”.

Select a tool to be used on the Auto create drilled object window and adjust options such as depth, speed, gap
etc.

The drilled object is automatically created inside of the selected object in a designated gap.

89
◈ Layout Drilling Position along Line

The drilled object along can be allocated along the outline of the selected the object.

Select a line on which the drilled object is automatically allocated. Click Insert → Drilling (beta) → Layout Drilling
Position along with Line...

Select a tool to be used on the Auto create drilled object window and adjust options such as depth, speed, gap
and etc.

The drilled object is automatically created along the outline of the selected object in a designated gap.

90
Image Engraving
What is image engraving?
This is an engraving method to express the shade of image with dots.

Tool: Tip
Clamp: Multi performance clamp

1. Attach a material to be engraved to the clamp.

2. If [Image] button is clicked, open window will appear. Import the image to be engraved.

3. Adjust the size and location of the image.

91
4. Click [Text Impact Engraving Tool path] button.

5. Adjust image engraving option in punching option window.

When engraving an image, bright part (white area) of image can be expressed by punching. Since
darker image shows higher quality, adjust the brightness to dark. Normally, dot ratio 10-20% shows the
best engraving quality for a portrait. According to the brightness and background of the image, the
optimal image conditions are different. Properly adjust it while checking the image preview for
engraving.

If you are not familiar with the image adjustment, click “Recommend the best” button to automatically adjust the
image.

92
6. Click “OK” button to create tool path for image engraving. After checking the tool path, click “Engraving” button.

When engraving an image, white area of image is punched. So the result of the tool path is shown as
negative image.

7. Click “Start engraving” button and designate the engraving location. And then, press and hold button
until it beeps (more than 3 seconds) to start the engraving.

93
Pen Engraving Process
Tool: Tip
Clamp: Pen clamp, Rotation clamp

1. Measure the width and diameter of the pen to be engraved.

Diameter

Width

2. Set the pen in the engraver by using a pen clamp.

3. Select pen template in the object registration information, and enter the width and diameter of the pen, and
click “OK” button.

94
4. Once the template appears, press [Text Input] on the toolbar. Click the work area with the mouse and enter

texts.

5. After texts are entered, press [Selection] on the toolbar to enter object selection mode. After selecting

entered character string, adjust the size and font of the object. If you want to place the object at the center of

the work area, click [Center in Page] button.

95
6. Once the design is completed, click [Hatching Tool path]. A tool path means a route along which a tool is

moved for engraving.

7. Select engraving option and tool from the “hatching tool path” window, and designate hatching gap and depth
when necessary and click “Create tool path” button.

96
8. “Tool path” object is created.

9. Click button.

10. Once “Output” window appears, specify how to measure engraving material. And then, click “Start engraving”

button.

11. Designate the location for engraving then press and hold button until it beeps (more than 3 seconds)
to start the engraving.

97
Curved Materials Engraving
In case of bent materials, it may scratch the surface of materials after engraving lower part.

1. Enter the thickness of curved surface to be engraved to automatically set up the Z moving height. Create a

tool path and Click [Engraving] button.

2. Once “Output” window appears, click a bent part of the material flatness to show various kinds of the bent
material. Select a shape the most similar to that of the material to be used and enter the thickness (thickness
of the area to which the engraving is applied) of the material’s round part before clicking “Start engraving”
button.

Enter the thickness of the part

to be engraved.

98
Entering Characters placed in a Circle
You can engrave by placing characters in a circle on round shape materials. There are two types – circler placed
characters and roundly placed characters in double layer. You can choose either one.

[Circular Text]

Click button to display the characters to be placed in a circle window. Use “Direction and angle” button to

select placement angle, and enter size, height and texts, and click “OK” button.

99
100
[Circular Text(Top/Bottom)]

Click button, then characters placed in a circle window appears. Enter the size of outer line and inner

line, and texts, and click “OK” button.

Adjust character angle

Drag the first character [R] or last character [y] in the character string to adjust the angle of character string.

Drag with mouse

Drag other characters with mouse to adjust the distance to the center of character string.

Drag with mouse

101
Entering Characters in a Curve
1. Click the [Line/Curve] button.

2. Click on a certain point with the mouse and designate a distance. Drag while clicking and holding the mouse to
make a curve appear. Press the right button on the mouse to create the curve.

[Mouse drag]

3. In the line shape box place the selected object in “NO line”.

4. Click a [Text Input] button, and move the mouse cursor to the curve line. The cursor shape will change like

below.

5. In state of the changed cursor shape, click the left button of the mouse to the character input mode.

102
Preview Font
Apply the fonts installed on the computer to the character string and preview the shape to select the font you will
use.

After entering characters, click “Preview” button in the object registration information window or click mouse
right button, and click “Font preview.” Then, “Font preview” window will appear.

If you drag the font list in the font preview window, or click a font while pressing “Ctrl” or “Shift” key, then the preview
of the selected font appears automatically. Double click the preview image of font to select it.

Preview image size will be larger.

Preview image size will be smaller.
Show the list of Installed fonts.

103
Change Texts
You can change the contents of design sample you frequently use.

Import a saved design sample or file, or select an object designed on the screen. Click [Text change] button
or click mouse right button to click “Text change”.

Change contents in the “Text change” window, and click “OK” button. The changed texts will be shown on the
screen.

104
Create Template
Template is an image corresponding to the materials to be engraved by 1:1 ratio. Load a template most
similar to the materials to be engraved, and enter the texts to be engraved. This way allows you to create
the location of engraving and the size of texts to be engraved more easily and conveniently.
Circle, heart, square and diamond templates are initially provided by the program and users can freely
add more templates. The shape of a template can be designed by graphic program (Illustrator, Photoshop,
CorelDraw, etc.) or a scan file of materials can be saved as jepg, bmp, png, srg file types to use.

[Add template1]

1. Click [Template] button, then “Template Library” window appears as below. Click the template list window

with mouse right button and click Import button, then “Open” window will appear.

2. Select picture files (jepg, bmp, png, etc.) from the “Open” window, and click “Open” button, then a window for
naming appears. Enter a name for new template, and click “OK” button to add the template to the library.

Click mouse right button in the template category window to add or delete a folder. Click the mouse right button in
a template list window to delete template list.

105
[Add template2]

1. Press [Image] button to import a picture file and save the size of image.

2. Click [Template] button to show “Template Library” window.

Click the template list window with mouse right button, and click “Save Selected” button. Enter new template name,
and click “OK” button to add the template to the library.

The template saved in the “Save Selected” menu is saved as designated size to the screen. When
designating template size, check “Maintain Original Size” and click OK button, then the template will be
loaded with the size designated when saving the template.

106
Saving as Design Sample
Save the edited contents in Magic Art as design sample. You can use this whenever necessary.

[Save 1]
1. Enter the contents, and adjust the font and size as desired. Select the object and click “save” from “file → Save
As Design Sample”.

2. Designate a folder or create new folder. Enter the name and click “OK” button to add it to the design sample.

107
[Save 2]

1. Select a designed object, and click [Design Sample] button.

2. Select the folder where the object is saved from the design sample library window. Click the mouse right button,
and click “Save selected” button. Enter the name to be saved, and click “OK” button to save it in the design
sample library.

108
Auto Change of Serial Number
Use this function when you change numbers by certain unit.
Edit the font and size of character, and press “Alt+N” key on a keyboard, or click “Text → serial number → Advance
Serial Number” to change the number automatically.

Click “Text → serial number → Serial Number option” and designate a unit from the “Serial Number Auto
Advancing Option” to change the serial number by the designated unit automatically.

If the serial number is not regular, then click “Text → Serial Number → Load Serial Number” in the menu. Enter
serial number in the “Load File…” field or click import. Import the serial number and click “Export to object”
button. The screen texts are automatically changed, and the serial number will be deleted from the list. The
deleted numbers will be shown in the “Exported Lines”.

109
Import serial number function can only import file separated by comma (.csv) or text file (.txt). Each row
of the file will be recognized as one serial number, and the contents of each row separated by comma
will be shown with linebreaks.

110
Add and Edit Picture
1) Add picture
This program provides a function to edit various types of picture files. Supported picture file types are as follows.
BMP Windows or OS/2’s bitmap graphic file
GIF CompuServe graphic file
JPG/JPEG JPEG bitmap graphic file
PNG Portable Network Graphics bitmap graphic file
PCX Z Soft PC paintbrush bitmap file
TIF/TIFF Tag Image File Format bitmap file
WMF Windows meta file

Picture file can be added by following methods.

1. Select [Image] from the toolbar or “Insert → Image…” from the menu.

2. If “Open” window shows up as the picture below, select the picture to be added, and click “Open” button.

111
3. Drag the work area by the mouse and decide picture size to load the picture.

112
2) Convert and edit picture file

Only single color image can be engraved. Since color image cannot be engraved by this engraver, it should be
converted to single color (1 bit) image.

[Convert single color image]

1. Select the image object you want to convert using mouse, and click “Transform” → “Bitmap” → “Mode” →
“Monochrome (1bit)…” or “Convert” button in the image object registration information window to select
“Monochrome (1bit).”

2. The window to convert it to single color image appears as below. Adjust the slider to change it to the single color
you want, and click “OK” button.

113
[Edit image]
Loaded image can be edited by third party program (picture edition). Select the image to be edited, and click
mouse right button. Click “Edit” button or select “Bitmap” → “Edit...” from “Transform." Then, third party program
(Paint) shows the image. After editing it, press “Save” from the file menu, and close the third party program (Paint)
to apply the edition.

114
Import a File in SVG Type
Magic Art supports vector graphic (SVG) files. So files saved as SVG type can be imported. If you save a design
as SVG type from design program Illustrator or CorelDraw, you can import the file to the Magic Art.

1. Click “File” → “Save As” button from Illustrator program menu to save a file in SVG type.

2. SVG option window appears; uncheck the checkbox next to “Preserve Illustrator Editing Capabilities”. Then
press the “OK” button to complete the save.

115
3. Click “File” → “Import” button from the Magic Art menu to import a file.

116
Origin Point Calibration
※ The machine is initially set up at factory. Please contact reseller before changing the machine

settings.

※ Calibrate the machine by using tip(Carbide, Diamond). The machine cannot be calibrated by using

endmill, cutter, etc.

※ Calibrate the machine while Engraver pressure lock is not fixed. The nose, tool, and material can

be damaged if you calibrate the machine while the head is fixed.

1) Tool Calibration (touch)

1. Fix a material of flat surface on the clamp.
2. Fix the tool short enough.

3. Press button to move the tool to the clamp.

4. Press button and go to the menu mode.

5. Press button, and when menu appears on the LCD window, then press

and hold button until it beeps (more than 3 seconds) to run the menu.

6. Select the “1.Touch Sensor” then press and hold button until it beeps (more than 3 seconds) to run
the menu.

7. The tool will be lowered down to the material hold in the center of the clamp.

8. Lower the tool manually by loosening the fixing bolt of the tool with a wrench, or raise the materials you're your
hands to make the tool and materials touch as shown in the picture below.

The tool touches on the material

9. Press and hold button until it beeps (more than 3 seconds) to confirm that the setting is saved, then the
tool will measure the material’s height.

117
118
2) Probe Calibration
1. Fix a material of flat surface on the clamp.

2. Press the button and go to the expert menu mode.

3. Press button, and when menu appears on the LCD window, then press

and hold button for more than 3 second until it beeps (more than 3 seconds) to run the menu.

4. Select the “2.Probe” then press and hold button until it beeps (more than 3 seconds) to run the menu.

5. When appears on the LCD window, press button to appear

on the LCD window, then press Z axis button to lower the tool to make it
close to the materials, and release the tool by using a wrench until the tool touches the materials. Then tighten the
tool.

6. Press and hold button until it beeps (more than 3 seconds), then the probe measures the height of the
materials and the length of the tool before the settings is saved.

7. Press and hold button until it beeps (more than 3 seconds) to begin a test run.
At this time, the tool draws four lines on the materials. If two lines out of four lines are seen one the materials,

then it is appropriate. If three lines are seen on the materials, then press button to raise it by 0.05mm,

and one line is seen, then press Z axis button to lower it down by 0.05mm

※0.05mm per line .

119
3) Laser Pointer Calibration
◈ Spindle

1. Fix a material of flat surface on the clamp.

2. Press button to move the tool to the clamp.

3. Press button and go to the expert menu mode.

4. Press button, and when menu appears on the LCD window, then press

and hold button until it beeps (more than 3 seconds) to run the menu.

5. Select the “3. Pointer/Flat” then press and hold button until it beeps (more than 3 seconds) to run the
menu.

6. The tool draws cross (＋) lines on the materials and the laser pointer is turned on.

7. Move the laser pointer to the center of the cross by using the direction key. Then

press and hold button.

8. Laser pointer moves closer to the material to accurately calibrate the laser pointer’s origin.

Move the laser pointer to the center of the cross by using the direction key on engraver,

and press and hold the button until it beeps (more than 3 seconds) to confirm that the setting is saved.

◈ Rotation clamp

120
1. Turn the clamp knob on the left side of the clamp and pull the clamp and spacer block to take it out.

2. Fix a ring on flat surface of the rotation clamp. (Ring Outer Diameter Max.18mm)

3. Press the button and go to the expert menu mode.

4. Press button, and when menu appears on the LCD window, then press

and hold button until it beeps (more than 3 seconds) to run the menu.

5. Select the “4.Pointer/Rotary” then press and hold button until it beeps (more than 3 seconds) to run
the menu.
6. The tool draws cross (+) on the materials, and the laser pointer is turned on.

7. Use the direction key to move the laser pointer to the center of the cross, and press

and hold button for more than 2 seconds to save the settings.

8. Laser pointer moves closer to the material to accurately calibrate the laser pointer’s origin.

Move the laser pointer to the center of the cross by using the direction key on engraver,

and press and hold the button until it beeps (more than 3 seconds) to confirm that the setting is saved.

121
122
◈ L-Tool

1. Turn the clamp knob on the left side of the clamp and pull the clamp and spacer block to take it out.

2. Fix a ring on flat surface of the rotation clamp. (Ring Outer Diameter Max.18mm)

3. Press the button and go to the expert menu mode.

4. Press button, and when menu appears on the LCD window, then press

and hold button until it beeps (more than 3 seconds) to run the menu.

5. Select the “5.Pointer/L-Tool” then press and hold button until it beeps (more than 3 seconds) to run
the menu.

6. When message appears on the LCD window like below, pull the L-Tool down by L-Tool line 1. Then press
button.

7. The tool draws cross (＋) lines on the materials.

8. When message appears on the LCD window, pull up the L-Tool. And the laser pointer is
turned on

123
9. Move the laser pointer to the center of the cross by using the direction key, and press

and hold the button until it beeps (more than 3 seconds) to confirm that the setting is saved.

10. Laser pointer moves closer to the material to accurately calibrate the laser pointer’s origin.

Move the laser pointer to the center of the cross by using the direction key on engraver,

and press and hold the button until it beeps (more than 3 seconds) to confirm that the setting is saved.

4) Saving Multi-performance Clamp Origin Position

1. Put a dot on the center of the material with the marker, and fix it at the center of the clamp.

2. Press button to move to flat mode.

※Menu will be changed if you enter ring inner/outer diameter mode menu.

3. Press button and go to the menu mode.

4. Press button, and when menu appears on the LCD window, then press

and hold button until it beeps (more than 3 seconds) to run the menu.

5. Select an “Origin No” and press and hold button to enter the

. And select the “CENTER” by using the direction key, then

press and hold button until it beeps (more than 3 seconds) to move to the origin.

124
6. Press button to turn on the laser pointer on the clamp.

7. Move the laser pointer to the center of the dot by using the direction key.

8. Press and hold the button until it beeps (more than 3 seconds) to confirm that the setting is saved.

9. When menu appears on the LCD window like below, select the “CENTER” by using the buttons.

10. Press and hold the button until it beeps (more than 3 seconds) to confirm that the setting is saved.
11. Tool will be moved to the position stored in the button.

5) Saving New Clamp Origin Position

1. Press button to move to flat mode.

※Menu will be changed if you enter ring inner/outer diameter mode menu.

2. Press button and go to the expert menu mode.

3. Press button, and when menu appears on the LCD window, then press

and hold button until it beeps (more than 3 seconds) to run the menu.

4. Select a “Clamp” and “Origin” what you want by using the

direction key, then press and hold button until it beeps (more than 3 seconds) to move to the origin.

5. Press button to turn on the laser pointer on the clamp.

6. Move the laser pointer to the point what you want by using the direction key, and

125
press and hold the button until it beeps (more than 3 seconds) to confirm that the setting is saved.

7. When menu appears on the LCD window like below, select the “Origin” what you want by using the

buttons.

8. Press and hold the button until it beeps (more than 3 seconds) to confirm that the setting is saved.
9. Tool will be moved to the position stored in the button.

6) Chuck Finger Origin point

1. Set the chuck finger to the rotation clamp of the engraver.

Flat chuck finger Round chuck finger

2. Press or button to turn on the laser pointer at the Origin of the chuck finger.
3. Use the direction key of the engraver to match the laser pointer to the base point of each chuck finger as below.

4. Press and hold or button until it beeps (more than 3 seconds) to confirm that the setting is saved.

7) Rotation Clamp Origin point (Z axis)

1. Set the sharp tool into the rotation chuck of the engraver as shown in the picture below.

126
2. Press button on the engraver to move the tool to the center of rotation clamp.
3. Pull the L-Tool down by L-Tool line 1.

4. Use buttons to align the end ㅋㅋof the ring inner diameter engraving tool and tip of the sharp
tool on the same horizontal line. If the distance between the tool and the sharp tool is too far, then bring them

closer by using button.

5. Press button for more than 2 seconds, then the message below will appear. Press button for
more than 2 seconds to save the setting.

6. Pull up the L-Tool.

127