Scribd
Upload
17 views

Command+Line+Interface PART5

Uploaded by

crazz123078
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

Command+Line+Interface PART5

Uploaded by

crazz123078
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Commands Description

add backup local create and store a backup file


add snapshot create snapshots
add user <username> uid <user-id-value> homedir creates a user
expert executes system shell
halt put system to halt
history shows command history
quit exits out of a shell
reboot reboots a system
restore backup local [value] restores local backup
rollback reverting the changes made
set backup restore local <filename> restores a local backup
set date yyyy-mm-dd sets system date
set dhcp server enable enable dhcp server
set dns primary <x.x.x.x> sets primary dns ip address
set dns secondary <x.x.x.x> sets secondary dns ip address
set expert-password set or change password
set edition default <value> set edition to 32-bit or 64-bit
set hostname <value> sets system hostname
set inactivity-timeout <value> sets the inactivity timeout
set interface ethx ipv4-address x.x.x.x mask-length 24 adds ip address to an interface
set management interface <interface name> sets an interface as management
set message motd value sets message of the day
set ntp active on/off activates ntp on/off
set ntp server primary x.x.x.x version <1/2/3/4> sets primary ntp server
set ntp server secondary x.x.x.x version <1/2/3/4> sets secondary ntp server
set snapshot revert<filename> revert to the selected snapshot
set snmp agent on/off sets snmp agent daemon on/off
set snmp agent-version <value> sets snmp agent version
set snmp community <value> read-only sets snmp readonly community
add snmp interface <interface name> sets snmp agent interface
set snmp traps receiver <ip address> version v1 specifies trap receiver
community value
set snmp traps trap <value> set snmp traps
set static-route x.x.x.x/24 nexthop gateway address x.x.x.x adds specific static route
on
set time <value> sets system time
set time zone <time-zone> sets the time zone

You might also like