Scribd
Upload
109 views1 page

145KV CVT Specifications

Uploaded by

Hemant Limaye
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
109 views1 page

145KV CVT Specifications

Uploaded by

Hemant Limaye
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MEHRU CAPACITOR VOLTAGE TRANSFORMER

MAKE TO IEC: 61869

MAXIMUM VOLTAGE 145kV RATED PRIMARY VOLTAGE 132kV/√3

RATED LINE VOLTAGE 132 kV RATED SECONDARY VOLTAGE 110 V / √3


WDG I SECONDARY CONNECTION 1a -1n
Equivalent Capacitance 4400pF
BURDEN 100 VA
FREQUENCY 50 Hz CLASS 0.2
OVERVOLTAGE FACTOR 1.5 Un 30 SECONDS
RATED SECONDARY VOLTAGE 110 V / √3
CONTINUOUS VOLTAGE FACTOR 1.2 WDG II SECONDARY CONNECTION 2a -2n
BURDEN 100 VA
SIMULTANEOUS BURDEN 100 VA CLASS 0.2

INSULATION LEVEL 275kV rms/650/KVp RATED SECONDARY VOLTAGE 110 V / √3


WDG III SECONDARY CONNECTION 3a -3n
YEAR OF MFD. 2017
BURDEN 50 VA
SERIAL No. CLASS 3P

180 ±15
CLASS OF INSULATION: A
CAUTION : WHEN HF TERMINAL IS NOT IN USE IT SHOULD BE SHORTED TO EARTH.
A

C1 A - HV TERMINAL
C1 - PRIMARY CAPACITANCE
C2 C2 - SECONDARY CAPACITANCE
HF - HIGH FREQUENCY TERMINAL
L L - COMPENSATING REACTOR
M1,M2&M3- MCB 10 Amp.
P Z - G - FERRO- RESONANCE
SUPPRESSION CIRUIT

S S S Tr P - PRIMARY WINDING OF
G INTERMEDIATE VT
M1 M2 M3
HF S - SECONDARY WINDING OF
Z INTERMEDIATE VT
1a 1n 2a 2n 3a 3n
Tr - INTERMEDIATE VOLTAGE
TRANSFORMER

MADE IN INDIA BY:


MEHRU ELECTRICAL AND MECHANICAL ENGINEERS (P) LTD.
SP-2/180, RIICO INDUSTRIAL AREA KHARANI EXT. BHIWADI-301019, RAJASTHAN INDIA)
(

TEL: 91-1493-222010,225412, Fax: 91-1493-222212, E-mail: [email protected]

190±20

NOTES :-
1. MIN. THICKNESS OF NAME PLATE :- 2.0 mm. min.
2. MATERIAL PF NAME PLATE :- ALUMINUM
3. SERIAL NUMBER SHALL BE ENGRAVE BEFORE THE DESPATCH. UNLESS OTHERWISE SPECIFIED DATE NAME MATERIAL
1. ALL DIMENSIONS ARE IN mm. DGN. 03.10.2017 SPS ALUMINUM MEHRU
2. TOLERANCE ON DIMENSIONS. DRN. 03.10.2017 RAKESH MEHRU ELECTRICAL &
±5%
CHD. 03.10.2017 BLS MECHANICAL ENGINEERS
3. SURFACE FINISH (P)LTD.
SCALE: N.T.S
TITLE

R1 COMMENT UPDATED 12.10.2017 4. SYMBOLS AND CONVENTIONS NAME PLATE DRAWING FOR 132 kV
DRG NO.:
R0 FOR APPROVAL 03.10.2017 AS PER IS 696 - 1960 CAPACITOR VOLTAGE TRANSFOEMER
REV. MODIFICATION DATE ME-132CVT-NP-7931-01/R1

You might also like