Data Sheet EUROSTAR 60 Control
Data Sheet EUROSTAR 60 Control
Universal laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically
adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. The stirrer
comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend
display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an
anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations
are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.
www.ika.com
Subject to technical changes
- Programmable functions
- Integrated temperature measurement
- Interval operation
- Timer function
- Adjustable safety circuit
- Locked function
- Infinitely adjustable speed
- Push-through agitator shafts
- Overload protection
- Short-term overload operation
- Slim casing
- Quiet operation
- Error code display
- H 67.60 temperature sensor and WH 11 WiCo holder included in delivery
www.ika.com
Subject to technical changes
Technical Data
Stirring quantity max. per stirring position (H2O) [l] 40
Motor rating input [W] 168
Motor rating output [W] 131
Motor principle Brushless DC
Speed display TFT
Speed range [rpm] 0/30 - 2000
Intermittent operation yes
Viscosity max. [mPas] 50000
Output max. at stirring shaft [W] 126
Permissible ON time [%] 100
Torque max. at stirring shaft [Ncm] 60
Speed adjustment stepless
Setting accuracy speed [rpm] ±1
Deviation of speed measurement n > 300rpm [%] ±1
Deviation of speed measurement n < 300rpm [rpm] ±3
Stirring element fastening chuck
Connection for ext. temperature sensor PT1000
Temperature display yes
Chuck range diameter [mm] 0.5 - 10
Hollow shaft, inner diameter [mm] 11
Hollow shaft (push-through - when stopped) yes
Fastening on stand extension arm
Extension arm diameter [mm] 16
Extension arm length [mm] 220
Torque display yes
Speed control electronic
Nominal torque [Nm] 0.6
Torque measurement trend
Deviation of torque measurement I [Ncm] ±6
Timer yes
Timer display TFT
Time setting range [min] 1 - 6000
Temperature measuring range [°C] -10 - +350
Temperature measurement resolution [K] 0.1
Accuracy of temperature measurement [K] ±0.5 + tolerance PT1000 (DIN EN 60751 Class A)
Limit deviation temperature sensor [K] ≤ ± (0.15 + 0.002xITI)
Housing material alu-cast coating / thermoplastic polymer
Communication distance (depend onbuilding) max. [m] 150
Dimensions (W x H x D) [mm] 86 x 267 x 230
Weight [kg] 4.7
Permissible ambient temperature [°C] 5 - 40
Permissible relative humidity [%] 80
Protection class according to DIN EN 60529 IP 40
RS 232 interface yes
USB interface yes
Voltage [V] 115
Frequency [Hz] 50/60
Power input [W] 176
www.ika.com
Subject to technical changes
www.ika.com
Subject to technical changes