Smart Data Logger (WIFI) Quick Installation Guide

4. Abnormal Status Handling

Model：CSCU-ST-WF01/ CSCU-ST-WFP01 If there is any abnormal platform data, please refer to the table below and
Part No: 91000273; Release Date: 2023/06 complete simple troubleshooting based on the status of the LED lights. If the fault
cannot be resolved or the indicator light fault status is not reflected in the table
Statement below, please contact after-sales service for assistance.
Please read this guide carefully before using the product, and keep it in a place (NOTE：Use the following table one minute after the WIFI network is configured
where maintenance personnel can easily find it. successfully)
Due to product version upgrades or other reasons, the content of this document
may be updated from time to time. Users should refer to the actual product Color Status Note Quick Troubleshooting
purchased and can download the latest version of the manual materials through
Yellow Blinking（1s on，1s off） Check the WIFI connection status. If
the official website or sales channels. Unless otherwise agreed, this document is
error state it cannot be solved, please contact
intended as a guide only. All statements, information, and recommendations in
the distributor.
this document do not constitute a warranty of any kind, express or implied.
Blinking（1s on，1s off） Check if the connection between the
Without the written permission of the company, no entity or individual may
Red error state data logger and the photovoltaic
extract, copy, or disseminate the contents of this document in any form.
equipment is normal.

Steady on 1. Check if the connection between

the data logger and the
NOTE: Precautions for installing the data logger photovoltaic equipment is normal;
error state
insert and remove the data logger after power is off. 2. Check the WIFI connection status.
If it cannot be solved, please
contact the distributor.

Install Data Logger

1. Installation Steps 5. Data Logger One-to-many Installation (only CSCU-ST-WFP01 is supported)
Step 1：Find the communication interface on the inverter and unscrew If you need to collect data on multiple inverters, connect them in daisy chain mode
the protective cap； using an RS485 communication cable by referring to the Communication
Step 2：Insert the data logger along the interface guide slot； Connection section in the inverter user manual.
Step 3：Tighten the fastening nut clockwise.

2. WIFI Network Configuration

Connect the data logger to the WIFI network according to the steps of "Data
Logger WIFI Network Configuration" in the APP User Guide. After the network
connection is successful, the subsequent function confirmation can be performed.

3. Confirmation of Data Logger Status

 Confirm the status of the data logger through the indicator light

Color Status Note Description

- powered data logger is not tightened or

Off
off powered on

Yellow
Steady on for 5s power-on data logger is in a power on
initialization initialization state

Green Blinking（1s on，1s off） normal communication with server and

operation inverter is normal
Please ensure that the data logger is working properly
Yellow Blinking（1s on，1s off） communication with the server is before leaving the site. If any abnormal conditions are
error state
abnormal
found, please contact your distributor as soon as possible

Blinking（1s on，1s off） communication with the inverter is

error state
Red abnormal

Steady on communication with the inverter

error state
and server is abnormal
 APP User Guide
APP Download
Please scan the following QR code to download.

You can also log in https://smartenergy.csisolar.com to use web version.

4. Add Data Logger
APP Guide After entering the power station, click on the "…" icon in the upper right corner,
NOTE：The screenshot of the APP is for reference only. Please refer to the and a function page will pop up below. Select the associated device and go to the
actual interface. associated device page. You can manually enter the serial number of the data
1. Register & Log in logger or scan the QR code of the serial number on the data logger to add it. The
After entering the APP, please click the "Register" button to register the account. serial number is usually located on the packaging box of the device. If the
packaging box has been lost, you can also find the code on the data logger body.

If you are a power station owner or end user, set the user type to personal.
If you are engaged in the photovoltaic industry dealers, equipment, operation and
5. Check Information
maintenance business, please select the user type as enterprise.
After adding a data logger, you can view the data in your power station, and click
on the power station to view the details. If it is difficult to find the power station
2. Data Logger WIFI Network Configuration
you need due to the large number of power stations, you can search in the upper
Connect the mobile phone to the target WIFI network in advance. On the login
right corner of the monitoring column based on the name.
page, click on "More Tools" and select the "WIFI Configuration" option. Follow the
prompts to scan the data logger QR code to enter the WIFI configuration page.
Enter the account password of the WIFI router for network configuration.
(Bluetooth needs to be turned on for distribution phones)
NOTE：Only supports 2.4GHz WIFI networks, 5GHz is not supported.

If you have any questions about the use or quality of our products, please contact
us and provide the following information：
 data logger model and serial number
 connected inverter model and serial number
3．Create the Power Station  problem description
As shown in the following figure, click on "Monitoring" below to enter the
monitoring page. Click on "+" in the upper right corner and fill in the information Contact Us
according to the prompts to start creating your photovoltaic power station. After CSI Solar Co., Ltd.
creation, the monitoring page will display your power station information. 199 Lushan Road, SND, Suzhou, Jiangsu, China, 215129
Sales Inquiries Email: [email protected]