Scribd
Upload
12 views

Physics XII CHP 7

Uploaded by

bigbangtheory97.0
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

Physics XII CHP 7

Uploaded by

bigbangtheory97.0
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Alternating Current CHAP T ER :7

ALTERNATING CURRENT
• Current which changes continuously in magnitude and in direction periodically, is called alternating current.
• It can be represented by a sine curve or a cosine curve.
I = I0 sin ωt or I = I0 cos ωt
where I0 is amplitude or peak value, I is the instantaneous value of alternating current.
• ω = 2π/T = 2πυ, where ω is the angular frequency (rad s-1) T is period of ac and υ is the frequency of ac.
• Alternating emf can similarly be represented as alternating current i.e., E = E0 sin ωt and E = E0 cos ωt.

PEAK AND RMS VALUE OF ALTERNATING CURRENT/VOLTAGE


• Peak value is defined as the maximum value reached by an alternating quantity (current/voltage) in one
cycle.
• Root mean square (RMS) value of alternating current is defined as that value of steady current which would
generate the same amount of heat in a given resistance in a given time, as is done by the alternating current
when passed through the same resistance for the same time.
I
Irms = —0 = 0.707I0, where I0 is the peak value or amplitude of alternating current.
2 E
• Similarly, for alternating voltage, Erms = —0 = 0.707E0
2
• All ac instruments measures rms value of ac.

REACTANCE AND IMPEDANCE


• Inductive Reactance : It is the opposition offered by the inductor to the flow of alternating current
through it. XL = ωL = 2πνL
• Capacitive Reactance : It is the opposition offered by the capacitor to the flow of alternating current
through it.
1 = ——1
XC = —
ωC 2πνC
• Impedance: The total effective resistance offered by the RLC circuit is called impedance.
Z = R2 + (XL - XC)2
• Inductive reactance is zero for dc (ν = 0) and has a finite value for ac.
• Capacitive reactance in infinite for ac.
• Capacitive reactance in infinite for dc (ν = 0) and has a finite value for ac.
LCR SERIES CIRCUIT AND IT’S IMPEDANCE
V0
• For V = V0 sin ωt, I = I0 sin (ωt – φ), where, I0 = — Z
1 2
Here Z is the impedance of the series LCR circuit and is given as, Z = R2 + (XL - XC)2 or Z = R2 + (ωL - —)
ωC
XL - XC
• The alternating current lags behind the voltage by a phase angle φ, tan φ = ———
R
• If XL > XC , tan φ is positive and the circuit is inductive.
• If XL < XC , tan φ is negative and the circuit is capacitive.

POWER IN AC CIRCUITS
• Instantaneous power: The power in the ac circuit at any instant of time is called instantaneous power. It
is equal to the product of values of alternating voltage and alternating current at that time.
• Average Power (Pav): The power averaged over one full cycle of ac is known as average power or true
power.
V0 I0
• Pav = Vrms Irms cos φ = —— cos φ
2
• Apparent Power (Pv) : The product of virtual voltage (Vrms) and virtual current (Irms) in the circuit is known
as virtual power.
V0 I0
• Pv = Vrms Irms = ——
2

POWER FACTOR
• Power factor is defined as the ratio of true power to apparent power. It can also be defined as the ratio of
the resistance to the impedance of an ac circuit.
• cos φ = —R
Z
• Power factor is a unitless and dimension less quantity.

WATTLESS CURRENT
The average power associated over a complete cycle with a pure inductor or pure capacitor is zero, even
though a current is flowing through them. This current is known as wattless current.

AC GENERATOR
• An ac generator produces electrical energy from mechanical energy of rotation of a coil.
• It is based on the phenomenon of electromagnetic induction.
• If a coil of N turns and area A is rotated at ν revolutions per second in a uniform magnetic field B, then the
motional emf produced is ε = NBA ω sin ωt or ε = NBA (2πν) sin ωt

TRANSFORMER
• Transformers are used for converting a low alternating voltage to a high alternating voltage and vice-versa.
• It is based on the phenomenon of mutual induction.
E IP nS
• For an ideal transformer, —S = — = — = K, where np is the number of turns in primary coil and ns is the number
EP IS nP
of turns in secondary coil.
• For a step up transformer, K > 1
• For a step down transformer, K < 1.

You might also like