ShenZhen Xinnoa Display Technology Co.
, Ltd
认 可 书
SPECIFICATION FOR APPROVAL
客户名称
CUSTOMER ：
客户型号
CLIENT TYPE ：
产品编号
PRODUCTION NO.：XNY12864-2280
出品日期
SHIPMENT DATE：2024 年 2 月 20 日
客户确认签章:
VALIDATED:
签名 SIGNATURE 日期 DATE
拟制 PREPARED 王俏 2024.2.20
审核 CHECKED 吴子强 2024.2.20
批准 APPROVED 罗锦炜 2024.2.20
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 2 /12
CONTENTS
1 CONTENTS - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - -- - - - -- - - -- - 2
2 RECORDS OF REVISION - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - 3
3 GENERAL SPECIFICATIONS ---------------------------- 4
4 FEATURES - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - 4
5 MACHANICAL SPECIFICATIONS ------------------------- 4
6 OUTLINE DIMENSIONS ---------------------------------- 5
7 ELECTRICAL CHARACTERISTICS ------------------------ 6
8 LED BACKLIGT ---------------------------- 6
9 OPTICAL CHARACTERISTICS ---------------------------- 7
10 DTIMING CHARACTERISTICS ----------------------------- 8-9
11 PIN ASSIGNMENT ------------------------------------ 10
12 INSTRUCTIONS -------------------------------------------------------------- 10--11
13 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS - - - - - - - - - - - - - - - 11
14 RELIABILITY ----------------------------------------- 11
15 PRECAUTION FOR USE - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - 12
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 3 /12
RECORDS OF REVISION
REVISED
DATE REVISED DESCRIPTIONS PREPARED CHECKED APPROVED
NO.
2024.2.20 A0 FIRST ISSUE
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 4 /12
3. GENERAL SPECIFICATIONS：
3-1 SCOPE:
This specification covers the delivery requirements for the liquid crystal display delivered by QUALITY to
Customer.
3-2 PRODUCTS:
Liquid Crystal Display Module (LCM)
3-3 MODULE NAME:
XNY12864-2280
4. FEATURES：
(1) Display Type: FSTN, 6 O’CLOCK, Transflective / positive
(2) Driving Method: 1/64DUTY, 1/9BIAS
(3) Built-in controller: ST7567S
(4) LED Backlight: 1PCS WHITE LED Backlight , If=15mA±3mA & Vf=2.9V
(5) VDD: 3.0V, Vop：9.2±0.2V
5. MACHANICAL SPECIFICATIONS：
ITEM SPECIFICATIONS UNIT
MODULE SIZE 74.0(W) x 41.7(H) x 6.1(D) mm
VIEWING AREA 50.0(W) x 25.0(H) mm
ACTIVE AREA 46.05(W) x23.01(H) mm
DOT SIZE 0.33(W) x0.33(H) mm
DOT PITCH 0.36(W) x0.36(H) mm
BACKLIGHT WHITE
ASSY.TYPE COG ---
WEIGHT TBD
NOTES:
LCM should be grounded during handling LCM.
REV. DESCRIPTION REVISER DATE
All Pages Of This Edition Approved
A0 First issue WZQ 2024.1.16
DOC.
Signature: Date:
STANDARD
SPEC.
6. OUTLINE DIMENSIONS
PRODUCT
DOTS:128X64
NO.
MODULE
VIEWING DIRECTION
HFG12864-738
PH:1.27*19=24.13
XNY12864-2280
HFG12864-2280
ShenZhen Xinnoa Display Technology Co., Ltd
Unspecified ± 0.20 UNITS: mm DATE: MODEL NUMBER :
Tolerance:
PAGE
SHEET: 1 OF 1
DESIGN BY: WZQ 2024.1.16
XNY12864-2280
CHECKED BY:
DATE: 2024.1.16
APPROVED BY: DO NOT SCALE THIS DRAWING. PROJECTION
5 /12
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 6 /12
7. ELECTRICAL CHARACTERISTICS
Standard Value
Characteristic Symbol Unit
MIN TYP MAX
Power Supply Voltage(1) VDD 2.9 3.0 3.2 V
Power Supply Voltage(2) LCD 9.0 9.2 9.4 V
Display pattern Current IDD 0.58 1.4 mA
Input leakage Current IIL 1.5 uA
Input logic LOW VIL 0.2VDD
Input logic HIGH VIH 0.8VDD
output logic LOW VOL 0.2VDD
output logic HIGH VOH 0.8VDD
Operating Temperature TOPR -20 － +70 0C
Storage Temperature TSTG -30 － +80 0C
8. LED BACKLIGHT
8-1 POWER SUPPLY FOR LED BACKLIGHT
+(A) (K)-
8-2 ELECTRICAL-OPTICAL CHARACTERISTICS
(Ta=25℃.Unless specified,The Ambient temperature Ta=25℃)
STANDARD VALUE
Item Symbol CONDITIONS UNIT
MIN TYP MAX
Forward Voltage Vf If=15mA 2.8 2.9 3.0 V
Forward current If Vf=3.0V 13 15 18 mA
Reverse Current Ir Vr=3.0V - - 100 uA
Spectral Line Half width △λ - - - nm
IF=15mA T=25℃
Peak wave length λp - nm
X
Chromaticity Coordinates
Y
Luminance Lv IF=15mA 100 - Cd/m2
Uniformity △ MIN/MAX=100% 70 - %
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 7 /12
9 .OPTICAL CHARACTERISTICS
(1) Measuring Instruments For Electro-optical Characteristics
NORMAL
LIGHT SOURCE
(*1) θ0 –θ=30°
θ0 θ
(*2)
*1.Light source position for measuring the reflective type of LCD panel
*2.Light source position for measuring the transflective / transmissive types of LCD panel
10.TIMING CHARACTERISTICS
10.1 8080 Interface
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 8 /12
10.2 6800 Interface
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 9 /12
11. PIN ASSIGNMENT
PIN NO. FUNCTION DESCRIPTIONS SYMBOL
1 Ground GND
2 Power (+3.0V) VDD
3 Select the MPU system interface mode.6800 is “H”,8080 is “L” C86
4 DB7
5 DB6
6 DB5
7 DB4
8-bit bi-directional data bus.
8 DB3
9 DB2
10 DB1
11 DB0
12 Read signal input,acitive”L” E/RD
13 Write signal input,acitive”L” /WR
14 Data or Command select. DATA is “H” , COMMAND is “L” RS
15 Reset input pin. Active ”L” /RES
16 Chip select pin. “L” active /CS1
17 BacklLight”+” LEDA
18 BacklLight”-” LEDK
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 10 /12
12.INSTRUCTIONS
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 11 /12
13. ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS
ITEM SYMBOL CONDITIONS CRITERION
NO DEFECT IN DISPLAYING AND
OPERATING TEMPERATURE TOPR -20℃〜+70℃
OPERATIONAL FUNCTION
NO DEFECT IN DISPLAYING AND
STORAGE TEMPERATURE TSTG -30℃〜+80℃
OPERATIONAL FUNCTION
14.RELIABILITY
ITEM CONDITIONS CRITERION
OPERATING HIGH TEMPERTURE +70℃ 96HRS NO DEFECT IN DISPLAYING AND
TEMPERATURE LOW TEMPERTURE -20℃ 96HRS OPERATIONAL FUNCTION
STORAGE HIGH TEMPERTURE +80℃ 96HRS NO DEFECT IN DISPLAYING AND
TEMPERATURE LOW TEMPERTURE – 30℃ 96HRS OPERATIONAL FUNCTION
NO DEFECT IN DISPLAYING AND
HUMIDITY 40℃ 80%RH 96HRS
OPERATIONAL FUNCTION
• Operating Time: thirty minutes exposure for
each direction (X,Y,Z) NO DEFECT IN DISPLAYING AND
VIBRATION
• Sweep Frequency: 10〜55Hz (1 min) OPERATIONAL FUNCTION
• Amplitude: 1.5mm
THERMAL NO DEFECT IN DISPLAYING AND
-20℃(30mins) ßà+70℃(30mins) 10 cycles
SHOCK OPERATIONAL FUNCTION
STANDARD PRODUCT MODULE
DOC. SPEC. NO. HFG12864-2280
XNY12864-2280 PAGE 12 /12
15. Precaution for Use
The following precautions should be followed, since this module contains precise parts.
(1) Do not store module for an extended periods of time under the conditions of high temperature and
high humidity.
(2) Avoid using or storing the module in areas that expose it to direct sunlight or ultraviolet rays.
(3) Use protective finger covers when handling the module to avoid scratching or staining the module.
(4) Care should be taken not to expose the module to static electricity, because the module contains
C-MOS LSI’s.
(5) The LSI is sensitive to light.
The user’s product should be designed so that LSI is not exposed to any light during operation.
(6) During installation, cover the display area with acrylic protection plates to protect the polarizer plate
and LCD cells.
(7) Do not apply any excessive shocks to the module because the module contains sensitive LCD cells.
Do not use a module, which has experienced strong mechanical shock.
(8) Care should be taken when the power supply turns on as following.
(a) Do not apply any input signals before the supplying voltage is applied.
(b) Do not turn off the power supply while any input signals are applied.
Caution
(1) Dangerous. Do not shock glass because glass can break.
(2) If module breaks, do not touch it directly.
(Glass could stick or cut skin.)
(3) Do not swallow Liquid Crystal.
(In case of broken LCD panel, do not swallow liquid crystal even if there is no proof
that liquid crystal is poisonous.)
(4) If liquid crystal is exposed to skin, wash the area thoroughly with alcohol or soap.
(5) When disposing of the product, please observe industrial waste disposal laws in each
country and district.
(6) In case of injury, give immediate treatment and consult with a doctor.
(7) This product is constructed precisely. Don’t disassemble or modify.
※ Neglecting this mark can cause injury to humans and damage to materials
