Normalization

o Normalization is the process of organizing the data in the database.

o Normalization is used to minimize the redundancy from a relation or set of
relations. It is also used to eliminate undesirable characteristics like Insertion,
Update, and Deletion Anomalies.
o Normalization divides the larger table into smaller and links them using
relationships.
o The normal form is used to reduce redundancy from the database table.

Why do we need Normalization?

The main reason for normalizing the relations is removing these anomalies. Failure to
eliminate anomalies leads to data redundancy and can cause data integrity and other
problems as the database grows. Normalization consists of a series of guidelines that
helps to guide you in creating a good database structure.

Data modification anomalies can be categorized into three types:

o Insertion Anomaly: Insertion Anomaly refers to when one cannot insert a new
tuple into a relationship due to lack of data.
o Deletion Anomaly: The delete anomaly refers to the situation where the deletion
of data results in the unintended loss of some other important data.
o Updatation Anomaly: The update anomaly is when an update of a single data
value requires multiple rows of data to be updated.

Types of Normal Forms:

Normalization works through a series of stages called Normal forms. The normal forms
apply to individual relations. The relation is said to be in particular normal form if it
satisfies constraints.
Following are the various types of Normal forms:

Normal Form Description

A relation is in 1NF if it contains an atomic

1NF
value.

A relation will be in 2NF if it is in 1NF and all

2NF non-key attributes are fully functional
dependent on the primary key.

A relation will be in 3NF if it is in 2NF and no

3NF
transition dependency exists.

A stronger definition of 3NF is known as Boyce

BCNF
Codd's normal form.
 A relation will be in 4NF if it is in Boyce Codd's
4NF normal form and has no multi-valued
dependency.

A relation is in 5NF. If it is in 4NF and does not

5NF contain any join dependency, joining should be
lossless.

Advantages of Normalization

o Normalization helps to minimize data redundancy.

o Greater overall database organization.
o Data consistency within the database.
o Much more flexible database design.
o Enforces the concept of relational integrity.

Disadvantages of Normalization

o The performance degrades when normalizing the relations to higher normal

forms, i.e., 4NF, 5NF.
o It is very time-consuming and difficult to normalize relations of a higher degree.
o Careless decomposition may lead to a bad database design, leading to serious
problems.

First Normal Form (1NF)

o A relation will be 1NF if it contains an atomic value.

o It states that an attribute of a table cannot hold multiple values. It must hold only
single-valued attribute.
o First normal form disallows the multi-valued attribute, composite attribute, and
their combinations.

Example: Relation EMPLOYEE is not in 1NF because of multi-valued attribute

EMP_PHONE.
EMPLOYEE table:

EMP_ID EMP_NAME EMP_PHONE EMP_STATE

7272826385,
14 John UP
9064738238

20 Harry 8574783832 Bihar

7390372389,
12 Sam Punjab
8589830302

The decomposition of the EMPLOYEE table into 1NF has been shown below:

EMP_ID EMP_NAME EMP_PHONE EMP_STATE

14 John 7272826385 UP

14 John 9064738238 UP

20 Harry 8574783832 Bihar

12 Sam 7390372389 Punjab

12 Sam 8589830302 Punjab

Second Normal Form (2NF)

o In the 2NF, relational must be in 1NF.

 o In the second normal form, all non-key attributes are fully functional dependent
on the primary key

Example: Let's assume, a school can store the data of teachers and the subjects they
teach. In a school, a teacher can teach more than one subject.

TEACHER table

TEACHER_ID SUBJECT TEACHER_AGE

25 Chemistry 30

25 Biology 30

47 English 35

83 Math 38

83 Computer 38

In the given table, non-prime attribute TEACHER_AGE is dependent on TEACHER_ID

which is a proper subset of a candidate key. That's why it violates the rule for 2NF.
To convert the given table into 2NF, we decompose it into two tables:

TEACHER_DETAIL table:

TEACHER_ID TEACHER_AGE

25 30

47 35

83 38

TEACHER_SUBJECT table:

TEACHER_ID SUBJECT

25 Chemistry

25 Biology

47 English

83 Math

83 Computer
Third Normal Form (3NF)

o A relation will be in 3NF if it is in 2NF and not contain any transitive partial dependency.
o 3NF is used to reduce the data duplication. It is also used to achieve the data integrity.
o If there is no transitive dependency for non-prime attributes, then the relation must be in third
normal form.

A relation is in third normal form if it holds atleast one of the following conditions for every non-
trivial function dependency X → Y.

1. X is a super key.
2. Y is a prime attribute, i.e., each element of Y is part of some candidate key.

Example:

EMPLOYEE_DETAIL table:

EMP_ID EMP_NAME EMP_ZIP EMP_STATE EMP_CITY

222 Harry 201010 UP Noida

333 Stephan 02228 US Boston

444 Lan 60007 US Chicago

555 Katharine 06389 UK Norwich

666 John 462007 MP Bhopal

Super key in the table above:

1. {EMP_ID}, {EMP_ID, EMP_NAME}, {EMP_ID, EMP_NAME, EMP_ZIP}....so on

Candidate key: {EMP_ID}

Non-prime attributes: In the given table, all attributes except EMP_ID are non-prime.

Here, EMP_STATE & EMP_CITY dependent on EMP_ZIP and EMP_ZIP dependent on EMP_ID.
The non-prime attributes (EMP_STATE, EMP_CITY) transitively dependent on super
key(EMP_ID). It violates the rule of third normal form.

That's why we need to move the EMP_CITY and EMP_STATE to the new <EMPLOYEE_ZIP>
table, with EMP_ZIP as a Primary key.

EMPLOYEE table:

EMP_ID EMP_NAME EMP_ZIP

222 Harry 201010

333 Stephan 02228

444 Lan 60007

555 Katharine 06389

666 John 462007

EMPLOYEE_ZIP table:

EMP_ZIP EMP_STATE EMP_CITY

201010 UP Noida
 02228 US Boston

60007 US Chicago

06389 UK Norwich

462007 MP Bhopal

Boyce Codd normal form (BCNF)

o BCNF is the advance version of 3NF. It is stricter than 3NF.

o A table is in BCNF if every functional dependency X → Y, X is the super key of the
table.
o For BCNF, the table should be in 3NF, and for every FD, LHS is super key.

Example: Let's assume there is a company where employees work in more than one
department.

EMPLOYEE table:

EMP_ID EMP_COUNTRY EMP_DEPT DEPT_TYPE EMP_DEPT_NO

264 India Designing D394 283

264 India Testing D394 300

364 UK Stores D283 232

 364 UK Developing D283 549

In the above table Functional dependencies are as follows:

1. EMP_ID → EMP_COUNTRY
2. EMP_DEPT → {DEPT_TYPE, EMP_DEPT_NO}

Candidate key: {EMP-ID, EMP-DEPT}

The table is not in BCNF because neither EMP_DEPT nor EMP_ID alone are keys.

To convert the given table into BCNF, we decompose it into three tables:

EMP_COUNTRY table:

EMP_ID EMP_COUNTRY

264 India

264 India

EMP_DEPT table:

EMP_DEPT DEPT_TYPE EMP_DEPT_NO

Designing D394 283

Testing D394 300

Stores D283 232

 Developing D283 549

EMP_DEPT_MAPPING table:

EMP_ID EMP_DEPT

D394 283

D394 300

D283 232

D283 549

Functional dependencies:

1. EMP_ID → EMP_COUNTRY
2. EMP_DEPT → {DEPT_TYPE, EMP_DEPT_NO}

Candidate keys:

For the first table: EMP_ID

For the second table: EMP_DEPT
For the third table: {EMP_ID, EMP_DEPT}

Now, this is in BCNF because left side part of both the functional dependencies is a key.
Fourth normal form (4NF)

o A relation will be in 4NF if it is in Boyce Codd normal form and has no multi-valued
dependency.
o For a dependency A → B, if for a single value of A, multiple values of B exists, then the relation
will be a multi-valued dependency.

Example
STUDENT

STU_ID COURSE HOBBY

21 Computer Dancing

21 Math Singing

34 Chemistry Dancing

74 Biology Cricket

59 Physics Hockey

The given STUDENT table is in 3NF, but the COURSE and HOBBY are two independent entity. Hence,
there is no relationship between COURSE and HOBBY.

In the STUDENT relation, a student with STU_ID, 21 contains two

courses, Computer and Math and two hobbies, Dancing and Singing. So there is a Multi-valued
dependency on STU_ID, which leads to unnecessary repetition of data.

So to make the above table into 4NF, we can decompose it into two tables:
STUDENT_COURSE

STU_ID COURSE

21 Computer

21 Math

34 Chemistry

74 Biology

59 Physics

STUDENT_HOBBY

STU_ID HOBBY

21 Dancing

21 Singing

34 Dancing

74 Cricket
59 Hockey
Fifth normal form (5NF)

o A relation is in 5NF if it is in 4NF and not contains any join dependency and joining should
be lossless.
o 5NF is satisfied when all the tables are broken into as many tables as possible in order to
avoid redundancy.
o 5NF is also known as Project-join normal form (PJ/NF).

Example

SUBJECT LECTURER SEMESTER

Computer Anshika Semester 1

Computer John Semester 1

Math John Semester 1

Math Akash Semester 2

Chemistry Praveen Semester 1

In the above table, John takes both Computer and Math class for Semester 1 but he doesn't take
Math class for Semester 2. In this case, combination of all these fields required to identify a valid
data.

Suppose we add a new Semester as Semester 3 but do not know about the subject and who will be
taking that subject so we leave Lecturer and Subject as NULL. But all three columns together acts
as a primary key, so we can't leave other two columns blank.

So to make the above table into 5NF, we can decompose it into three relations P1, P2 & P3:
P1

SEMESTER SUBJECT

Semester 1 Computer

Semester 1 Math

Semester 1 Chemistry

Semester 2 Math

P2

SUBJECT LECTURER

Computer Anshika

Computer John

Math John

Math Akash

Chemistry Praveen

P3
SEMSTER LECTURER

Semester 1 Anshika

Semester 1 John

Semester 1 John

Semester 2 Akash

Semester 1 Praveen