Aviation Ground Equipment Corp.

DAC300 Mobile Pre-Conditioned Air Unit

PERFORMANCE FEATURES:
Proven design:
• Hermetic scroll compressor re-
frigeration circuits with oversized
condensing coils
• Finned-tube enclosed element
electric resistance heaters
• Aluminum box frame and panels
• ETL tested, listed and labeled
• Meets all UL, NEMA, CE,
NEC, OSHA, NFPA, ASHRAE,
ASME and AHM 73 & 74 stan-
Model DAC300 Trailer Mounted dards
Easy to Operate:
TRILECTRON: • Simple lighted button operator
Trilectron Industries and air-a-plane products division have led station mounted at ramp level
the industry in product design and innovation. The best com- • Automatic DDC controls de-
bination of experience, new technology and customer input has termine appropriate mode and
resulted in a product line you can trust for your aircraftʼs needs. output temperatures
Economical:
APPLICATION:
• Blower fan mounted directly
Completely self-contained diesel powered PCAir unit for com- to the fan motor requiring no
fortable conditioning of narrow body and wide body passenger clutches, gears or pulleys
aircraft cabins. Endurance: approximately 8 hours of continu- • Less moving parts equate to
ous operation per full fuel tank. lower maintenance costs
• High efficiency output through
OPTIONS:
the use of multiple refrigerant
Units can be trailer mounted for towing or truck mounted on circuits in a “cascading series”
a suitable chassis (consult factory). Power for the Generator/ arrangement
Engine set can be John Deere, Perkins, Cummins or Deutz. • Significantly less cost than run-
All engines are diesel and jet fuel compatible. ning the aircraft APU
Durable:
CE AND EMISSIONS CERTIFIED:
• Designed to endure the rigors of
All engines meet current Tier Emissions Certifications as speci- the airport environment
fied by EPA and CARB. CE Certification and international • Easy access to all components
labeling is an added feature of this equipment. for maintenance

Model Cooling Capacity Heating Capacity Length Width Height Weight

DAC300 30 Tons (106 kW) 82.4 kW 178” (452 cm) 84” (213 cm) 74” (188 cm) 7,970 lb (3,615 kg)
53 Hanse Avenue, Freeport, NY 11520 U.S.A.
Phone: (516) 546-0003 • Fax: (516) 546-0198
Trilectron’s DAC300 Mobile Pre-Conditioned Air Unit
Specifications

Construction Electrical • Indicator Lights: Lighted pushbuttons (see

below)
• Base Unit Weight: 7,970 lb • Blower Motor: 20 HP (14.9 kW)
• Buttons: Start, stop, mode, Aircraft class
• Painted steel frame construction • Condenser Fan Motors: 2 @ 3 HP
selection
• Aluminum body access panels and doors (2 @ 2.2 kW)
with stainless steel hardware • Electric heater (optional): 48 kW, 3 stage,
Available Options
• NEMA 4 Electrical enclosure and weather finned-tube enclosed element
Configuration
tight wiring conduit
Control • 14”D Insulated, Flat Air Delivery Hose
• Large operational switches, buttons and
• Truck Mounted (consult factory)
latches for cold weather operation in heavy • 24VAC Control Voltage
gloves • Exterior hazard lights
• Manual and Automatic Mode Selection
• Shore Power Cable & Switch
• Damper Airflow Control
Finish • Operator panel with large lighted momen-
• Proximity Crash Rail
• Anti-corrosive polyester powder provides tary push buttons • CE Package
excellent weather resistance, flexibility and • Low Fuel Warning Beacon
adhesion, plus a strong resistance to chemi- Generator/Engine Set • Operation Indicator beacon
cal agents such as glycol and skydrol Generator • Special paint scheme
• Standard colors are high gloss white over • AC output: 480V, 3PH, 4 wire Engine
black frame • Marathon Continuous Duty Alternator • Engine Block Heater
• Custom colors require a paint chip or Engine • Ether Cold Start
swatch for accurate color match • John Deere, Cummins, Perkins or Deutz • Racor® Fuel Filter
• Turbocharged 4-stroke, inline 4 cylinder Specifications subject to change without notice.
Performance • Diesel and Jet Fuel Compatible
• Nominal Cooling Capacity: 30 tons
• Nominal Airflow: 180 ppm (1.36 kg/s) Protection
• Nominal Static Press: 22”wg (5.48 kPa) Air Conditioning
• Nominal Electric Heater: 48 kW, 3 stg • High discharge air temperature (with heat
• Nominal Water Heater: 28 kW option)
• Rating Condition: 95°Fdb/78°Fwb (35°Cdb • Airflow loss
/ 26°Cwb ), 460/3/60, R22, sea level • High refrigerant pressure
• Rated Cooling Capacity: 327,100 Btu/hr • Low refrigerant pressure
(95.9 kW) • Circuit breakers and overloads on all mo-
• Rated Condenser Airflow: 24,000 CFM tors
(11,326 L/s) Engine
• Rated Condensate Flow: 0.26 GPM • High Temperature Shutdown
(16 mL/s) • Low Oil Pressure Shutdown
• Rated Heat Output • Overvoltage Shutdown
(Blower+Heater+Engine): 281,150 Btu/hr • Undervoltage Shutdown
(82.4 kW)
• Overcrank Starting Protection
• Refrigerants: R22, R134a, 407c
• Output Circuit Breaker
• Regional temperatures and elevation affect
unit performance. Consult factory for Displays/
specific unit selection data.
Instrumentation
Environmental • Meters: Discharge air tem-
• Operation Temperature: -40° F to +125° F perature, fuel level, hour meter,
(-40° C to + 52° C) water temperature, oil pressure,
• Relative humidity 0-100% battery volt meter

Updated 04/07/03

Aviation Ground Equipment Corp.

53 Hanse Avenue, Freeport, NY 11520 U.S.A.
Phone: (516) 546-0003 • Fax: (516) 546-0198
E-mail: [email protected] • www.AviationGroundEquip.com