0% found this document useful (0 votes)
21 views2 pages

Se Ev Charger Datasheet Eu

Uploaded by

Safi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
21 views2 pages

Se Ev Charger Datasheet Eu

Uploaded by

Safi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SMART ENERGY

SolarEdge EV Charger
For Europe
3
YEAR
WARRANTY

Residential EV charging solution that seamlessly integrates with the full


SolarEdge Home ecosystem
Utilizes excess PV to charge EV from the sun, for Control and monitoring via the mySolarEdge
reduced homeowner electricity bills app, including remote operations, charging
schedules, and charging history
Charge smarter with our custom scheduling
feature, allowing automatic charging during low- Optional RFID card authentication and MID
rate periods meter

Suitable for single and three phase installations, Supports up to three SolarEdge EV Chargers per
for both indoor and outdoor use site(1)

solaredge.com
SolarEdge EV Charger
For Europe
SPECIFICATIONS
Rated AC Power Output 4.6 / 7.4 / 11 / 22 kW
Rated Current (configurable) 10 / 13 / 16 / 20 / 25 / 32 Single Phase or Three Phase A
Nominal AC Output Voltage 3 x 230 / 400 V
Line Frequency 50 Hz
Mains Forms TT / TN / IT
Internal Consumption Idle: 4; plugged in: 5; charging: 7 W
Charge Mode Mode 3 in accordance with IEC 61851-1 AC charging
Over-Voltage Category III, in accordance with EN 60664
Protection Class IP54
Protection Against Mechanical Impact IK10
Rated Short-Circuit Current < 10 (effective value in accordance with EN 61439-1) kA
Residual Direct Current Detecting Device (RDC-DD) ≥ 6 (characteristic in accordance with IEC 62955, < 10 s) mA
Ventilation No
Maximum Device Pairing Capacity 3 SolarEdge EV Chargers per site(1)
AC TERMINALS
Cable Feed Top (surface); back side (flush)
Type Spring-type terminal
Rigid / flexible 0.2 – 16 mm2
Cross-section Flexible with wire end sleeve
0.25 – 10 mm2
with / without plastic sleeve
Stripping Length 12 mm
Suggested minimum cross-section:
Connection Cross-section
16 A rated current 5 x 2.5 mm2
of the Supply
32 A nominal current 5 x 6.0 mm2
Temperature Rating 105 °C
CABLE / SOCKET
Type Type 2: up to 32 A / 400 V AC in accordance with EN 62196-1 and VDE-AR-E 2623-2-2
Cable Length (for variants with cable) 6 m
AMBIENT CONDITIONS
Installation Environment Indoor and outdoor
Operating Temperature @16 A -25 to +50 (without direct sunlight) °C
Operating Temperature @32 A -25 to +40 (without direct sunlight) °C
Storage Temperature -25 to +80 °C
Relative Air Humidity 5 to 95 (non-condensing) %
Altitude Max. 2000 above sea level m
COMMUNICATION INTERFACE
Ethernet 1 LSA+® terminals
Data Transfer Rate 10 / 100 Mbit/s
Ethernet 2 RJ45 alternative to Ethernet 1
WLAN/WI-FI IEEE 802.11 b,g,n, 2.4 GHz
WLAN/WI-FI Supported Modes AP Ad-hoc-Mode, Client Mode Frequency 2400-2483.5 MHz, EIRP ≤ 20 dBm
ADDITIONAL CAPABILITIES
MIFARE card /tag according to ISO 14443 or ISO 15693
RFID Card
Frequency 13.553-13.567 MHz, EIRP ≤ -7 dBm
OCPP Backend SolarEdge OCPP pre-configured
STANDARD COMPLIANCE
CE Declaration of Conformity Yes
MID Optional, Accuracy Class B (according to EN 50470-1 / -3)
Mess- und Eichrecht (ME) Optional with SE-EVK22SRG-01
INSTALLATION SPECIFICATIONS
Residential inverters with SetApp configuration, including: SolarEdge Home Hub Inverters,
Compatible SolarEdge Inverters SolarEdge Home Wave Inverters, SolarEdge Short String Inverters,
SolarEdge Three Phase Inverters (SE16K and SE17K)
Height (Cable / Socket) X Width X Depth 643 / 495 X 240 X 142 mm
Weight (Cable / Socket) 7.8 / 5 kg
(1) Supported from inverter firmware version 4.21.

ORDERING INFORMATION
PART NUMBER DESCRIPTION
SE-EVK22C00-01 SolarEdge EV Charger – 22 kW Three Phase, 6m Cable, Type 2 Connector
SE-EVK22CRM-01 SolarEdge EV Charger – 22 kW Three Phase, 6m Cable, Type 2 Connector, RFID, MID
SE-EVK22SRG-01 SolarEdge EV Charger 22 kW – Three Phase, Socket, Type 2 Connector, RFID, Mess- und Eichrecht
SE-EVK22SRM-01 SolarEdge EV Charger – 22 kW Three Phase, Socket, Type 2 Connector, RFID, MID
SE-ACCRF10-01 Kit of 10 RFID cards

© SolarEdge Technologies, Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc.
All other trademarks mentioned herein are trademarks of their respective owners. Date: June 17, 2024 DS-000191-EU. Subject to change without notice.

You might also like