LED STRIP SPECIFICATION

5050SMD 48LEDs LED STRIP

Note: LEDYI may change product specifications and installation guidance without prior notice.
5050SMD 48LEDs LED STRIP

Part Number: LY48-S5050W30-W24-IP20 IP20/IP52/IP65H/IP65/IP67/IP67E/IP68

W12/W24
W21/W24/W27/W30/W40/W60
Description

12V or 24V for option, flexible LED strip (3LED/step =62.5mm(12V)/6LED/step

=125mm(24V)) with 3M adhesive tape on the back for easy installed.

530.35lm/m at 11.5W/m. 120° beam angle. Very good color reproduction

with CRI>90. “One Bin Only” within 3 MacAdam guarantees constant color

temperature and high light quality at a lifetime of 54,000 hours (L70).

Double-layer FPC(2Oz) for good heat dissipation.

Dimensions & Waterproof

125 10.4 20.8

10

5000
Red/black wire L=150mm, 18AWG Unit:mm R min =50mm
62.5mm

DC12V 10mm

4mm 4mm 4mm

2mm 2.3mm 2.2mm
20.8mm

10mm 10mm 10.2mm 12mm 12mm 12mm

125mm
IP20 IP52 IP65H IP65 IP67 IP67E/IP68
DC24V 10mm

20.8mm

Product Specification

Dimension 5000x10x2mm Voltage(V) DC12V/DC24V

Chip Type 5050SMD Current(A/m) 0.96A(12V)/0.48A(24V)
Chip Density 48LEDs/m Power(W/m) 11.5W
Step LEDs 3LEDs(12V)/6LEDs(24V) Beam Angle 120°
Step Length 62.5mm(12V)/125mm(24V) Operation Temperature -20°C~50°C

Product Photometrics (Data base on IP20 CRI>90)

TM-30-15
CCT Lumen Efficacy CRI R9
(K) (lm/m) (lm/w) Rf Rg
(Fidelity) (Gamut)

2100±100 622.72 54.15 91.02 79.91 90.11 100.1

2400±100 653.31 56.81 92.59 81.04 91.04 100.24

2700±100 694.14 60.36 92.31 81.20 91.31 100.13

3000±100 739.22 64.28 93.25 82.42 90.26 101.13

4000±200 806.84 70.16 95.13 85.12 92.52 102.18

6000±300 853.07 74.18 92.25 81.15 91.20 100.13

Web: www.ledyi.com | Mail: [email protected] | Tel.: +86 0755 2302 5890

Copyright©2019 LEDYI LIGHTING CO., LIMITED | All Rights Reserved
1/2
 5050SMD 48LEDs LED STRIP

Bining

For all your order

ONE
BIN
ONLY
Today and tomorrow

IP20: bare, max. light output and the best color consistency, indoor use.
IP52: Silicone coating, ~5% less output and 3rd best color consistency, indoor use, for damp environments.
IP65: Silicon tube / Heat shrink tube / Extrusion tube / U milky tube + clear cover, ~3% less output and 2nd
best color consistency, Indoor use or semi-outdoor use, for raining environments.
IP67: Silicone tube + silicon filling , ~7% less output and 4th best color consistency, outdoor use, max length
is 10 meters.
IP67E: Solid silicone extrusion, ~7% less output and 4th best color consistency, outdoor use, max length up
to 50 meters.
IP68: PU(Polyurethane),~7% less output and 4th best color consistency, under the water, within 2 meters deep.

Light Distribution Curve[ Data base on 1m IP20 3000K CRI>90, Unit:cd]

387.96lx

96.99lx

77.8

155.7

233.5 43.11lx

311.4

389.2
24.25lx
389.2

311.4

233.5
15.52lx
155.7

77.8

10.78lx

Beam Angle:113.30°

Packing Information (Data base on IP20)

Sticker

CAUTION
THIS BAG CONTAINTS
MOISTURE AND ELECTROSTATIC
SENSITIVE DEVICES

Attention
1. Storage Temperature: -40°C~80°C,
Operating Temperature: -25°C~60°C.
2. Installation surface must be smooth, clean and dry.
3. The part of LED components can not be fixed on the surface of the sharp edge.
4. Strip should not be collided or crushed.
5. Strip can be cut following the cutting lines.
6. The LED strips, must not exceed 5 meters, when used in the DC series circuit.

RoHS

5meters/reel 1reel/bag 60bags/carton 26x28x68cm, 7.7kgs/carton

Web: www.ledyi.com | Mail: [email protected] | Tel.: +86 0755 2302 5890
Copyright©2019 LEDYI LIGHTING CO., LIMITED | All Rights Reserved
2/2