Daily Class at 9PM

CRASH COURSE
UPSSSC JE
Daily Time: 04 PM & 09 PM
All AE-JE Exams Covered

Mentor - Shubham Aggarwal

 Daily Class at 9PM

Episode 1: Click Class Link: https://youtu.be/l3Ajm7nxr_8

Mentor - Shubham Aggarwal

 ABOUT ME
❖ Teaching Experience: 5+ Years
❖ Qualification: B.Tech in Civil Engg, Postgraduate in Urban
Planning & Development
❖ Email: [email protected]
❖ Achievements:
▪ SSC JE , NBCC , NPCC
▪ GATE
▪ Mentored More Than 50,000+ Students

❖ Area of Expertise: Civil Engineering AE & JE Exams

❖ Designed: Layout of 51 Solar Power Plants for Indian
Railways.
Mentor - Shubham Aggarwal
 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

1. Undisturbed samples are obtained by:

A. direct excavations
B. thin-walled samplers.
C. thick-walled samplers
D. augers

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

2. Plate load test is useful to estimate:

A. bearing capacity of foundation -
B. settlement of foundation
C. both bearing capacity of foundation and settlement
of foundation
D. none of the above

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

3. Greater skin friction:

A. retards the sinking of well.
B. accelerates the sinking of well
C. does not affect the sinking of well
D. none of the above

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

4. For sand of uniform spherical particles, the ratio of void

ratios in the loosest and the densest states is:
A. 2.6
B. 3.5
C. 4.6
D. 3.0

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

5. A soil having particles of nearly the same size is

known as:
A. well graded
B. uniformly graded
C. poorly graded
D. gap graded

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

6. The soils most susceptible to liquefaction are:

A. saturated dense sands
B. saturated fine and medium sands of uniform
particle size
C. saturated clays of uniform particle size.
D. saturated gravels and cobbles

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

7. Cross regulators are provided

A. To rise the water level to its upstream during
the periods of low discharge in parent channel
B. To help in closing the supply to downstream of
the parent channel
C. To absorb fluctuations in various sections of
the channel systems
D. All of the above

Answer. D

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

8. The correct increasing order of the surface areas

of the given soils is :
A. silt, sand, colloids, clay
B. silt, sand, clay, colloids
C. sand, silt, clay, colloids
D. clay, silt, sand, colloids

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

9. Undisturbed soil samples are required for

conducting :
A. hydrometer test
B. shrinkage limit test
C. consolidation test.
D. specific gravity test

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

10. Compression index of a soil helps to determine:

A. total time required for consolidation
B. time required for 50% consolidation.
C. total settlement of clay layer
D. pre-consolidation pressure of clay

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

11. When the degree of consolidation is 50%, the

time factor is about :
A. 0.2
B. 0.5
C. 1.0
D. 2.0

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

12. Which one of the following parameters can be

used to estimate the angle of internal friction of
a sandy soil?
A. particle size
B. roughness of particle
C. particle size of distribution
D. density index

Answer. D

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

13. A cantilever sheet pile derives its stability from:

A. lateral resistance of soil
B. self-weight
C. the Deadman
D. the anchor rod

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

14. Which one of the following have an influence on

the value of permeability?
(1) void ratio
(2) degree of saturation
(3) pressure head
Answer. A
(4) grain size
Select the correct answer:
A. 1,2 and 4 B. 1,2 and 3
C. 2,3 and 4 D. 1,3 and 4

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

15. A soil has a bulk density of 1.8 g/m3 at a water

content of 5%. If the void ratio remains constant,
then its bulk density for a water content of 10%
will be :
A. 1.98 g/cm3
B. 1.88 g/cm3
C. 1.80 g/cm3
D. 1.70 g/cm3

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

16. In a Mohr's diagram, a point above Mohr's

envelope indicates:
A. imaginary conditions
B. safe condition
C. imminent failure condition
D. condition of maximum obliquity

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

17. Cohesive soils are :

A. good for backfill because of low lateral pressure :
B. good for backfill because of high shear strength
C. poor for backfill because of large lateral pressure
D. none of the above

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

18. An ideal fluid is:

A. one which obeys Newton's law of viscosity
B. frictionless and incompressible.
C. very viscous
D. frictionless and compressible

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

19. Metacentric height for small values of angle of

heel is the distance between the :
A. centre of gravity and centre of buoyancy
B. centre of gravity and metacentre
C. centre of buoyancy and metacentre
D. free surface and centre of buoyancy

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

20. Which of the following is used to measure the

discharge?
A. current meter
B. venturi meter
C. pitot tube
D. hotwire anemometer

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

21. In steady flow of a fluid, the total acceleration of

any fluid particle:
A. can be zero.
B. is never zero
C. is always zero
D. is independent of coordinate

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

22. The discharge through a V-notch varies as:

A. H1/2
B. H3/2
C. H5/2
D. H5/4
where H is head

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

23. The ratio of maximum velocity to average velocity for

steady flow between fixed parallel plates is:
A. 2/3
B. 4/3
C. 3/2
D. 2

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

24. The losses are more in :

A. laminar flow
B. transition flow
C. turbulent flow.
D. critical flow

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

25. Which is the best hydraulic section of the

following open channel cross-sections?
A. rectangle.
B. triangle
C. trapezoidal
D. semi-circle

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

26. The depth of flow for maximum velocity in a

circular channel section with diameter equal to
1.5 m is:
A. 0.75 m
B. 1.065 m
C. 1.215 m
D. 1.425 m

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

27. If the specific energy at the up stream section of

a rectangular channel is 3 m and minimum
specific energy is 2.5 m, the maximum height of
jump without causing afflux will be :
A. 0.50 m
B. 1.20 m
C. 2.50 m
D. 5.50 m

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

28. The value of Froude number can be :

A. less than 1
B. equal to 1
C. greater than
D. all the above

Answer. D

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

29. A model of a weir made to a horizontal scale of

1/40 and vertical scale of 1/9 discharge 1
litre/sec. Then the discharge in the prototype is
estimated as:
A. 1 Lps
B. 108 Lps
C. 1080 Lps
D. 10800 Lps

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

30. In a steady laminar flow of a liquid through a

circular pipe of internal diameter D, carrying a
constant discharge, the hydraulic gradient is
inversely proportional to :
A. D
B. D2
C. D4
D. D5

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

31. For laminar flow in a circular pipe, the Darcy's

friction factor 'f' is equal to :
A. 16/Re
B. 32/Re
C. 64/Re
D. none of the above

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

32. The maximum thickness of boundary layer in a

pipe of radius "r" is:
A. 0
B. r/2
C. r
D. 2r

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

33. During chaining along a straight line, the leader

of the party has 4 arrows in his hand while the
follower has 6. Distance of the follower from the
starting point is:
A. 4 chains
B. 6 chains
C. 120 m
D. 180 m

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

34. The angle of intersection of the two plane

mirrors of an optical square is:
A. 30°
B. 45°
C. 60°
D. 90°

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

35. The correction for sag is:

A. always additive
B. always subtractive.
C. always zero
D. sometimes additive and sometimes subtractive

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

36. If the quadrantal bearing of a line is N25°W, then

the whole circle bearing of the line is :
A. S25°E
B. 205°
C. 335°
D. 295°

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

37. Mean sea level at any place is the average datum

of hourly tide heights observed over a period of
nearly:
A. 5 years
B. 10 years
C. 20 years
D. 50 years

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

38. Which one of the following specifications for

length of base line refers to "Third order
triangulation system"?
A. 0.5 to 3 km
B. 1.5 to 5 km
C. 5 to 15 km
D. 10 to 20 km

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

39. A negative declination shows that the magnetic

meridian is to the :
A. eastern side of true meridian
B. western side of true meridian.
C. southern side of true meridian
D. none of the above

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

40. In stress strain curve of steel, limit of

proportionality depends upon:
A. area of cross section
B. type of loading
C. type of material.
D. all of the above

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

41. Modulus of rigidity is defined as the ratio of:

A. longitudinal stress to longitudinal strain
B. shear stress to shear strain
C. stress to strain
D. stress to volumetric strain

Answer. D

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

42. If a composite bar of steel and copper is heated,

then the copper bar will be under:
A. tension
B. compression.
C. shear
D. torsion

Answer. B

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

43. The sum of normal stress is :

A. constant
B. variable
C. dependent on the planes
D. none of the above

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

44. Shear stress on principal planes is:

A. zero
B. maximum
C. minimum
D. none of the above

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

45. Maximum bending moment in a beam occurs where:

A. deflection is zero
B. shear force is maximum
C. shear force is minimum
D. shear force changes sign

Answer. D

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

46. The maximum bending moment due to a moving load

on a fixed ended beam occurs:
A. at a support
B. always at the mid span
C. under the load only.
D. none of the above

Answer. A

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

47. The variation of bending moment in the portion of a

beam carrying linearly varying load is:
A. linear
B. parabolic
C. cubic
D. constant

Answer. C

Mentor - Shubham Aggarwal

 UPSSSC JE Crash Course Practice Session Set-1
For Any Query Call on 9650052904 Daily Class at 9PM

48. The relationship between the radius of curvature R,

bending moment M and flexural rigidity EI is given by:
A. R = M/EI
B. M = EI/R
C. EI = R/M
D. E = MI/R

Answer. B

Mentor - Shubham Aggarwal

 Daily Class at 9PM

49. The pipe which is used to carry the discharge

from sanitary fittings like bathrooms, kitchen etc.
is called
A. Waste pipe
B. Soil pipe
C. Vent pipe
D. Anti-siphonage pipe

Answer. A

Mentor - Shubham Aggarwal

 Daily Class at 9PM

50. A chamber made of concrete, fibre glass, PVC or

plastic, through which domestic waste water,
sewage flows for primary treatment is called
A. Drainage tank
B. Septic tank
C. Pit latrine tank
D. Water harvesting tank

Answer. B

Mentor - Shubham Aggarwal