Ultrasound

APRIL 2022

What is medical ultrasound?

Medical ultrasound falls into two distinct categories: diagnostic and therapeutic.
Diagnostic ultrasound is a non-invasive diagnostic technique used to image inside the body.
Ultrasound probes, called transducers, produce sound waves that have frequencies above the
threshold of human hearing (above 20KHz), but most transducers in current use operate at much
higher frequencies (in the megahertz (MHz) range). Most diagnostic ultrasound probes are
placed on the skin. However, to optimize image quality, probes may be placed inside the body
via the gastrointestinal tract, vagina, or blood vessels. In addition, ultrasound is sometimes used
during surgery by placing a sterile probe into the area being operated on.
Diagnostic ultrasound can be further sub-divided into anatomical and functional ultrasound.
Anatomical ultrasound produces images of internal organs or other structures. Functional
ultrasound combines information such as the movement and velocity of tissue or blood, softness
or hardness of tissue, and other physical characteristics, with anatomical images to create
“information maps.” These maps help doctors visualize changes/differences in function within a
structure or organ.
Figure A shows how the ultrasound
Therapeutic ultrasound also uses sound waves above the range of human hearing but does probe (transducer) is placed over the
not produce images. Its purpose is to interact with tissues in the body such that they are either carotid artery. Figure B is a color
modified or destroyed. Among the modifications possible are moving or pushing tissue, heating ultrasound image showing blood flow
tissue, dissolving blood clots, or delivering drugs to specific locations in the body. These (the red color in the image) in the
destructive, or ablative, functions are made possible by use of very high-intensity beams that carotid artery.
can destroy diseased or abnormal tissues such as tumors. The advantage of using ultrasound
therapies is that, in most cases, they are non-invasive. No incisions or cuts need to be made to
the skin, leaving no wounds or scars.

How does it work?

Ultrasound waves are produced by a transducer, which can both emit ultrasound waves, as well as detect the ultrasound echoes
reflected back. In most cases, the active elements in ultrasound transducers are made of special ceramic crystal materials called
piezoelectrics. These materials can produce sound waves when an electric field is applied to them, but can also work in reverse,
producing an electric field when a sound wave hits them. When used in an ultrasound scanner, the transducer sends out a beam of
sound waves into the body. The sound waves are reflected back to the transducer by boundaries between tissues in the path of the
beam (e.g. the boundary between fluid and soft tissue or tissue and bone). When these echoes hit the transducer, they generate
electrical signals that are sent to the ultrasound scanner. Using the speed of sound and the time of each echo’s return, the scanner
calculates the distance from the transducer to the tissue boundary. These distances are then used to generate two-dimensional images
of tissues and organs. During an ultrasound exam, the technician will apply a gel to the skin. This keeps air pockets from forming
between the transducer and the skin, which can block ultrasound waves from passing into the body.

What is ultrasound used for?

Diagnostic ultrasound. Diagnostic ultrasound is able to non-invasively image internal organs within the body. However, it is not good
for imaging bones or any tissues that contain air, like the lungs. Under some conditions, ultrasound can image bones (such as in a fetus
or in small babies) or the lungs and lining around the lungs, when they are filled or partially filled with fluid. One of the most common
uses of ultrasound is during pregnancy, to monitor the growth and development of the fetus, but there are many other uses, including
imaging the heart, blood vessels, eyes, thyroid, brain, breast, abdominal organs, skin, and muscles. Ultrasound images are displayed in
either 2D, 3D, or 4D (which is 3D in motion).
Functional ultrasound. Functional ultrasound applications include Doppler and color Doppler ultrasound for measuring and
visualizing blood flow in vessels within the body or in the heart. It can also measure the speed of the blood flow and direction of
movement. This is done using color-coded maps called color Doppler imaging. Doppler ultrasound is commonly used to determine
whether plaque build-up inside the carotid arteries is blocking blood flow to the brain.
Another functional form of ultrasound is elastography, a method for measuring and displaying the relative stiffness of tissues, which can
be used to differentiate tumors from healthy tissue. This information can be displayed as either color-coded maps of the relative

www.nibib.nih.gov
 Ultrasound, page 2

stiffness; black-and white maps that display high-contrast images of tumors compared with anatomical images; or color-coded maps
that are overlaid on the anatomical image. Elastography can be used to test for liver fibrosis, a condition in which excessive scar tissue
builds up in the liver due to inflammation.
Ultrasound is also an important method for imaging interventions in the body. For example, ultrasound-guided needle biopsy helps
physicians see the position of a needle while it is being guided to a selected target, such as a mass or a tumor in the breast. Also,
ultrasound is used for real-time imaging of the location of the tip of a catheter as it is inserted in a blood vessel and guided along the
length of the vessel. It can also be used for minimally invasive surgery to guide the surgeon with real-time images of the inside of the
body.
Therapeutic or interventional ultrasound. Therapeutic ultrasound produces high levels of acoustic output that can be focused on
specific targets for the purpose of heating, ablating, or breaking up tissue. One type of therapeutic ultrasound uses high-intensity beams
of sound that are highly targeted, is called High Intensity Focused Ultrasound (HIFU). HIFU is being investigated as a method for
modifying or destroying diseased or abnormal tissues inside the body (e.g. tumors) without having to open or tear the skin or cause
damage to the surrounding tissue. Either ultrasound or MRI is used to identify and target the tissue to be treated, guide and control the
treatment in real time, and confirm the effectiveness of the treatment. HIFU is currently FDA approved for the treatment of uterine
fibroids, to alleviate pain from bone metastases, and most recently for the ablation of prostate tissue. HIFU is also being investigated as
a way to close wounds and stop bleeding, to break up clots in blood vessels, and to temporarily open the blood brain barrier so that
medications can pass through.

Are there risks?

Diagnostic ultrasound is generally regarded as safe and does not produce ionizing radiation like that produced by x-rays. Still,
ultrasound can produce some biological effects in the body under specific settings and conditions. For this reason, the FDA requires that
diagnostic ultrasound devices operate within acceptable limits. The FDA, as well as many professional societies, discourage the casual
use of ultrasound (e.g. for keepsake videos) and recommend that it be used only when there is a true medical need.

What are examples of NIBIB-funded projects using ultrasound?

The following are examples of current research projects funded by NIBIB that are developing new applications of ultrasound that are
already in use or that will be in use in the future:
Acoustic Radiation Force Impulse Imaging (ARFI). ARFI is a new technique developed by researchers at Duke University with NIBIB
support that uses ultrasound elastography to differentiate liver tumors from healthy tissue, as well as identify the presence of fibrosis.
This non-invasive method could reduce unnecessary liver biopsies, which can be painful and sometimes dangerous. ARFI has received
FDA approval and is now commercially available in the U.S.
Low-cost, miniature transducers and arrays. By using new transducer materials and new manufacturing methods, ultrasound arrays
can be produced in a manner similar to the production of computer chips. One type of new transducer, called CMUTs, (capacitive
micromachined ultrasound transducers) are less expensive to produce, easier to manufacture as arrays, and have several advantages
over standard transducers. This new CMUT technology was recently used in a device developed using NIBIB funding called the GE Vscan.
The Vscan is a palm-size ultrasound scanner, which has both anatomical imaging and color Doppler capability. The device is currently in
clinical use and costs considerably less than a full-sized ultrasound scanner. Its small size and low cost, as well as range of applications,
allow it to be used in ambulances, emergency rooms, field hospitals, or other remote locations. It is currently being used in 100 countries
around the world.
Histotripsy technique for dissolving blood clots. Researchers at the University of Michigan are investigating the clot- dissolving
capabilities of a high intensity ultrasound technique, called histotripsy, for the non-invasive treatment of deep-vein thrombosis (DVT).
This technique uses short, high-intensity pulses of ultrasound to cause clot breakdown. The researchers are currently experimenting on
pigs, in which they have successfully demonstrated the effectiveness of this technique, and its possible use in humans. They are
currently working on new methods to avoid inadvertent vessel damage during clot treatment, and to provide real-time imaging
feedback to monitor the treatment. This research could have a significant impact, since current conventional treatments for DVT involve
drug therapy and sometimes invasive removal of the clots, which requires a several-day hospital stay, and may result in complications
after treatment. In contrast, the non-invasive histotripsy technique is 50 times faster than the current technique, does not require drugs
or external agents, and if successful, could be used as an outpatient procedure.

NIBIB Contacts
National Institute of Biomedical Imaging and Bioengineering Phone: 301-496-8859
6707 Democracy Blvd., Suite 200 [email protected]
Bethesda, MD 20892 www.nibib.nih.gov

www.nibib.nih.gov