C27 Industrial Engine TWM00001-UP(SEBP4496 - 46) - Documentation Page 1 of 5

Previous Screen

Welcome: j210im1

Product: INDUSTRIAL ENGINE

Model: C27 INDUSTRIAL ENGINE TWM
Configuration: C27 Industrial Engine TWM00001-UP

Troubleshooting
C27 and C32 Industrial and Petroleum Engines
Media Number -RENR9324-07 Publication Date -01/12/2009 Date Updated -05/10/2016

i06850171

Diagnostic Code Cross Reference

SMCS - 1900

Problems with the electronic control system are reported via these types of codes: flash codes,
SPN/FMI codes, diagnostic codes, and event codes.

For information on flash codes, refer to Troubleshooting, "Flash Codes".

For information on SPN/FMI codes, refer to Troubleshooting, "Diagnostic Codes".

For information on diagnostic codes, refer to Troubleshooting, "Diagnostic Codes".

For information on event codes, refer to Troubleshooting, "Event Codes".

Use Table 1 as a cross-reference between the various types of codes.

Portions of this material are reprinted with permission from SAE J1939DA_201607© 2016 SAE
International. SAE International is not responsible for any use or translation of this material, in whole
or in part. Please contact SAE International to obtain a complete copy of SAE J1939DA_201607, the
official definitive source of this standard.

Table 1
Cross Reference for Diagnostic Codes

Diagnostic
Flash SPN(1)/FMI Code
Description of Code
Code Code or
Event Code
N/A 1387-15 E443(2) High Auxiliary Pressure Warning

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 14/12/16
C27 Industrial Engine TWM00001-UP(SEBP4496 - 46) - Documentation Page 2 of 5

1387-16 High Auxiliary Pressure Derate

1387-00 High Auxiliary Pressure Shutdown

441-15 High Auxiliary Temperature Warning

441-16 E445(2) High Auxiliary Temperature Derate

441-00 High Auxiliary Temperature Shutdown

626-05 2417-05 Ether Injection Control Solenoid current low

626-06 2417-06 Ether Injection Control Solenoid current high

1387-03 1835-03 Auxiliary Pressure Sensor open/short to +batt

1387-04 1835-04 Auxiliary Pressure Sensor short to ground

Auxiliary Temperature Sensor open/short to

441-03 1836-03
+batt

441-04 1836-04 Auxiliary Temperature Sensor short to ground

111-02 111-02 Engine Coolant Level Sensor Loss of Signal

174-03 174-03 Fuel Temperature open/short to +batt
13
174-04 174-04 Fuel Temperature short to ground

678-03 41-03 8 Volt DC Supply short to +batt

678-04 41-04 8 Volt DC Supply short to ground

620-03
21 262-03 5 Volt Sensor DC Power Supply short to +batt
1079-03

620-04
262-04 5 Volt Sensor DC Power Supply short to ground
1079-04

100-03 100-03 Engine Oil Pressure open/short to +batt

24 100-04 100-04 Engine Oil Pressure short to ground

100-10 100-10 Engine Oil Pressure abnormal rate of change

102-03 Boost Pressure Sensor short to +batt

102-03
1785-03 Intake Manifold Pressure Sensor voltage high
25 102-04 Boost Pressure Sensor short to ground
102-04
1785-04 Intake Manifold Pressure Sensor voltage low

102-10 102-10 Boost Pressure Sensor abnormal rate of change

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 14/12/16
C27 Industrial Engine TWM00001-UP(SEBP4496 - 46) - Documentation Page 3 of 5

Intake Manifold Pressure Sensor abnormal rate

1785-10
of change

108-03 274-03 Atmospheric Pressure open/short to +batt

26
108-04 274-04 Atmospheric Pressure short to ground

110-03 110-03 Engine Coolant Temperature open/short to +batt

27
110-04 110-04 Engine Coolant Temperature short to ground
28 91-13 91-13 Throttle Position calibration required

32 91-08 91-08 Throttle Position signal abnormal

190-08 190-08 Engine Speed signal abnormal

34
723-08 342-08 Secondary Engine Speed signal abnormal
190-15 Engine Overspeed Warning
35 E362(2)
190-00 Engine Overspeed Shutdown

94-03 94-03 Fuel Pressure open/short to +batt

37
94-04 94-04 Fuel Pressure short to ground

105-03 172-03 Intake Manifold Air Temp open/short to +batt

38
105-04 172-04 Intake Manifold Air Temp short to ground
42 637-13 261-13 Engine Timing calibration required

100-17 Low Engine Oil Pressure Warning

46 100-18 E360(2) Low Engine Oil Pressure Derate

100-01 Low Engine Oil Pressure Shutdown

168-00 168-00 System Voltage high

51 168-01 168-01 System Voltage low

168-02 168-02 System Voltage intermittent/erratic

630-02 268-02 Check Programmable Parameters
56
631-02 253-02 Personality Module mismatch

58 639-09 247-09 J1939 Data Link communications

110-15 High Engine Coolant Temperature Warning

61 110-16 E361(2) High Engine Coolant Temperature Derate

110-00 High Engine Coolant Temperature Shutdown

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 14/12/16
C27 Industrial Engine TWM00001-UP(SEBP4496 - 46) - Documentation Page 4 of 5

111-17 Low Engine Coolant Level Warning

62 111-18 E2143(2) Low Engine Coolant Level Derate

111-01 Low Engine Coolant Level Shutdown

63 94-15 E096 High Fuel Pressure Warning

105-15 High Intake Manifold Air Temperature Warning

64 E539(2) High Intake Manifold Air Temperature
105-00 Shutdown

174-15 High Fuel Temperature Warning

65 174-16 E363(2) High Fuel Temperature Derate

174-00 High Fuel Temperature Shutdown

651-05 001-05 Cylinder # 1 Injector open circuit
71
651-06 001-06 Cylinder # 1 Injector short

652-05 002-05 Cylinder # 2 Injector open circuit

72
652-06 002-06 Cylinder # 2 Injector short

653-05 003-05 Cylinder # 3 Injector open circuit

73
653-06 003-06 Cylinder # 3 Injector short
654-05 004-05 Cylinder # 4 Injector open circuit
74
654-06 004-06 Cylinder # 4 Injector short

655-05 005-05 Cylinder # 5 Injector open circuit

75
655-06 005-06 Cylinder # 5 Injector short
656-05 006-05 Cylinder # 6 Injector open circuit
76
656-06 006-06 Cylinder # 6 Injector short

657-05 007-05 Cylinder # 7 Injector open circuit

77
657-06 007-06 Cylinder # 7 Injector short

658-05 008-05 Cylinder # 8 Injector open circuit

78
658-06 008-06 Cylinder # 8 Injector short
659-05 009-05 Cylinder # 9 Injector open circuit
79
659-06 009-06 Cylinder # 9 Injector short

80 660-05 010-05 Cylinder # 10 Injector open circuit

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 14/12/16
C27 Industrial Engine TWM00001-UP(SEBP4496 - 46) - Documentation Page 5 of 5

660-06 010-06 Cylinder # 10 Injector short

661-05 011-05 Cylinder # 11 Injector open circuit

81
661-06 011-06 Cylinder # 11 Injector short
662-05 012-05 Cylinder # 12 Injector open circuit
82
662-06 012-06 Cylinder # 12 Injector short
(1)
Suspect Parameter Number
(2)
Caterpillar Electronic Technician (ET) will display the number 1, 2, or 3 after the event code to designate a warning, a
derate, or a shutdown.

Copyright 1993 - 2016 Caterpillar Inc. Wed Dec 14 10:12:31 UTC+0800 2016
All Rights Reserved. j210im1
Private Network For SIS Licensees.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 14/12/16