Scribd
Upload
16 views

XC-6171 Data Sheet

Uploaded by

xue jun xiang
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

XC-6171 Data Sheet

Uploaded by

xue jun xiang
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Scotchkote™

XC-6171 Fusion Bonded Epoxy Coating

Product Description Coating Test Data


3M™ Scotchkote™ XC-6171 Fusion Bonded Epoxy Property Test Description Result
Coating is a one-part, heat curable, thermosetting,
powdered epoxy coating designed for coating the interior Mandrel Bend Saudi Aramco 09-SAMSS-091 10.5 pipe diameters
of production tubing, line pipe, and fittings. When applied 600-750 micron thickness (5.4°/PD)
over a primer, XC-6171 FBEC meets Saudi Aramco Autoclave Treated Seawater Service Pass*
seawater and sour gas service requirements. (Saudi Aramco Temperature - 95˚C (203˚F)
09-SAMSS-091) Pressure - 3000 psi (20.7
MPa) Sample is immersed
Typical Properties halfway in ASTM D-1143
solution (high solids brine)
Property Value and pressurized with N 2

Color beige Wet, Sour Gas Crude Service Pass*


Temperature - 95˚C (203˚F)
Specific Gravity 1.70 Pressure - 3000 psi (20.7
MPa) Sample is immersed
Coverage 113 ft2/lb/mil halfway in Formation Water
0.587 m2/kg/mm (high solids brine) and
pressurized with 3% CO2,
Shelf life 80°F (27°C) 24 months 3% H2S, and 94% CH4
Gel time @ 400°F (204°C) 120-160 seconds (Line Pipe) Wasia Water Service Pass*
70-100 seconds (Custom) Temperature - 95˚C (203˚F) (Phenolic
Pressure - 3000 psi (20.7 primer is
Pill Flow - 300°F (149°C) 30-85 mm (Line Pipe) MPa) Sample is immersed required for
30-85 mm (Custom) halfway in Wasia Water this service)
(high solids brine) and
pressurized with 100% CO2
General Application Information
Abrasion Saudi Aramco 09-SAMSS-091 0.08 - 0.14 g
1. Remove oil, grease and loosely adhering deposits. Resistance ASTM D 4060 weight loss
2. Abrasive blast-clean the surface to near-white in Adhesion Saudi Aramco 09-SAMSS-091 Pass
accordance with SSPC-SP10 or NACE No. 2.
3. Prime surface with Scotchkote XC- 6186 water base Hardness Shore D 80 Shore D
primer or liquid phenolic primer. Water
4. Place part in preheat oven until it reaches a temperature Absorption ASTM D 570-95 1.07 %
of 340°- 360°F (171°- 182°C). If using a phenolic
Dielectric
primer, do not exceed 30 minutes at temperature. Strength ASTM D 149-95a 1306 volts/mil
5. Deposit XC-6171 coating onto the interior of the pipe at
the specified thickness. Adhesion to
6. Place coated part in a post cure station to reach a Steel (shear) ASTM D 1022 5264 psi
temperature of 410°- 430°F (210°- 221°C). Total time Impact ASTM G14 - modified Pass (160 in•lbs)
in post cure station must be a minimum of 60 minutes, (coated 3x3x1/8 inch panel to a thickness of 16 mils)
but not more than 90 minutes.
7. Electrically inspect for holidays after coating has * Pass means excellent adhesion, no blistering, no cracking or
cooled to 200°F (93°C) or lower. delamination.
8. Repair all holidays.
Handling and Safety Precautions Ordering Information
Read all Health Hazard, Precautionary, and First Aid For ordering information, technical information, product
statements found in the Material Safety data Sheet and/or information or to request a copy of the Material Safety Data
product label of chemicals prior to handling or use. Sheet, call:
Phone: 1-800-722-6721 or 1-512-984-1038
Fax: 1-800-828-9329 or 1-512-984-2210

Important Notice
All statements, technical information, and recommendations related all warranties, expressed or implied, including but not limited to the
to Seller’s products are based on information believed to be reliable, implied warranties of merchantability and fitness for a particular
but the accuracy or completeness thereof is not guaranteed. Before purpose which warranties are hereby expressly disclaimed.
utilizing the product, the user should determine the suitability of the
product for its intended use. The user assumes all risks and liability SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER
whatsoever in connection with such use. PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT
LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY
Any statements or recommendations of the Seller which are not INJURY OR FOR ANY DIRECT, INDIRECT, INCIDENTAL OR
contained in the Seller’s current publications shall have no force or CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY
effect unless contained in an agreement signed by an authorized REASON OF THE USE OF ANY OF THE SELLER’S PRODUCTS..
officer of Seller. The statements contained herein are made in lieu of

Corrosion Protection Department


6801 River Place Blvd. 40% Pre-consumer waste paper Litho in USA.
Austin, TX 78726-9000 10% Post-consumer waste paper © 3M 1998 80-6111-0957-2

You might also like