Rolling shutter doors
double track inorganic cloth
Internal
Safety first
Stay home if you Keep your Wash/sanitize
have flu symptoms distance hands
Alarm Assembly Emergency
point exit
Emergency First aid kit Protective
number equipment
2 Internal
Content
▪ Terminology
▪ Door opening size, component name
▪ Picture
▪ Installation conditions/space reservation
▪ technical parameters
3 Internal
Rolling shutter doors
Terminology
Door opening size, component name
4 Internal
Product types of rolling shutter doors Folded
Fireproof shutter (double track inorganic cloth) Fireproof rolling shutter (folding and lifting)
Scroll Motor
Control Box
Curtain Rail
Button Box
5 Internal
Terminology for fire shutter door fittings
6 Internal
What’s side installed and Center installed fire shutter
(Double track inorganic cloth)
Center Line
wall wall
7 Internal
What’s side installed and Center installed fire shutter
(Double track inorganic cloth)
8 Internal
What’s side installed and Center installed fire shutter
(Double track inorganic cloth)
Side installed Middle installed
Full clear opening Height opening Height - 500mm
9 Internal
Limited Opening
No Limited Width Limited Height
1 Track Max=10 meter Max=6 meter
2 Folding Max=20 meter Max=10 meter
10 Internal
The properties, composition and structural characteristics of the products
▪ Stable fire performance, easy installation.
▪ Fireproof cloth in the process of textile warp with nickel-chromium wire,
composite cloth with wire rope, has a very high tensile performance, the
middle of the curtain surface with steel belt to strengthen.
▪
Fire control center linkage, can achieve two steps off, the temperature
reaches 73℃, can automatically shut down, inorganic fiber composite
material.
▪ Guide rail size 120*50*2 optional galvanized steel plate
or stainless steel
▪ Motor 3C certified products, with automatic limit switch, chain
break protection device, manual control device, etc
▪ Control box 3C certified products, with fire linkage function, sound
and light alarm function, manual control function, with reserve power
supply
11 Internal
Curtain
Key components: decorative cloth (0.22mm), fireproof cloth (2mm), wire fire radiation blanket
cloth (0.22mm)
Optional color: blue, gray, etc）
12 Internal
Box Cover
▪ The box plate is rolled by 0.6mm galvanized steel plate, and the keel is made of 40*40 Angle steel.
The curtain is usually made at the place with suspended ceiling, and the box is not required.
The surface of the box plate can be sprayed with plastic.
Front piece of rolling Rear piece of curtain case Side mount front piece of
curtain case for medium rolling curtain case
loading
Batch supply, the rolling curtain box according to the situation in the field processing
13 Internal
Rolling shutter doors
Picture
14 Internal
Fire shutter (Double track inorganic cloth)
15 Internal
Fire shutter (Double track inorganic cloth)
16 Internal
Fire shutter (double track inorganic cloth)
17 Internal
Fireproof rolling shutter (folding and lifting)
18 Internal
Fireproof rolling shutter (folding and lifting)
19 Internal
Fireproof rolling shutter (folding and lifting)
20 Internal
Rolling shutter doors
Installation conditions/space reservation
21 Internal
Measuring the size of the opening of fire shutter door
1. According to the construction drawings and Party A's requirements, determine the
installation method of the rolling curtain on site: internal installation, external installation, left
inside right outside, left outside right inside, motor installation position: left installed, right
installed.
Center Line
wall wall
22 Internal
Installation conditions/space reservation
23 Internal
Measuring the size of the opening of fire shutter door
▪ Width measurement: measure the distance between columns or walls, take the three
measurement data of upper, middle and lower, take the minium value as the order date, indicate
whether plastering or not, and confirm and sign the measurement results with party a before the
implementation.
24 Internal
Measuring the size of the opening of fire shutter door
▪ 2.1. Under special circumstances, the production size can be determined only after confirming and
signing with Party A
▪ 2.2. When there is a column, according to the design requirements of the drawings and the actual installation
position of therolling curtainon thesite,determinethespecificinstallationpositionofthesupportplateand the
guiderailforsizeand measurement.Itcannotbe used asthesinglesizefrom any pointbetween thecolum n s
toavoid the difficulty of measuring the single size to the installation, and the rangefinder should be used.
25 Internal
Measuring the size of the opening of fire shutter door
Height measurement: the distance from the bottom of the beam of the column to the
ground (i.e. the bearing plate is installed at the lower end of the beam).
If there are obstacles (such as grooves, water pipes, suspended ceiling, etc.), the installation
height and partition height shall be determined through negotiation with Party A.
For openings with a height ≤3000, the installation method shall be determined with Party
A to ensure the passing height of the design.
26 Internal
Measuring the size of the opening of fire shutter door
The inner back need to add a partition, that is, from the bottom end of the beam to the
installation of the lower mouth of the bearing plate, if the bearing plate is lifted or dropped, the
partition will also increase or decrease, if there is a cement curtain on the back must indicate
that no additional partition is needed.
Size measurement should pay attention to the position of the embedded manual controller of the
rolling shutter door and the position of the main power supply in civil construction. If the
reserved hole is on the left side, the motor should be on the left side, that is, the left installed.
Smoke device
27 Internal
Rolling shutter doors
Technical parameters
28 Internal
1.Technical parameters 50+350+50=400
▪
Fire resistance time: ≥3.00 hours fire resistance integrity
and heat insulation.
▪ Power supply of door rolling machine: 380V 50HZ, three-
phase five-wire system.
▪ Motor power:0.25~0.75 KW .
▪ Opening speed: 2~7m/min.
speed of weight drop < 9m/min.
▪ The center distance between the double track super fire
shutter.
▪ Two curtains is not less than 240mm, 350mm is
recommend.
29 Internal
2. Technical parameters
▪
The distance between the splints on the double track super - grade fireproof rolling curtain is
200~800mm
▪ Opening and closing noise: < 60dB
▪ Fire signal: passive
▪ Width of opening < 10 meters; Folding and lifting width of opening < 20 meters
▪ The height of the opening < 6 meters. Folding and lifting the height of the opening
< 10 meters General box size: thickness of 1000mm, height of 500mm
▪ The distance between the center of the guide rail is 350mm, and the minimum wall of the guide rail
120mm
30 Internal
1.The motor
▪ Supply of door rolling machine: 380V 50HZ three-phase five-wire
door rolling machine power according to product specifications.
▪ Electric start and fall speed: 2 ~ 7.5m/min.
▪ The speed of dead weight decrease is less than 9.5m/min
▪
The average noise of rolling curtain opening and closing and
running: less than or equal to 60 decibels
▪ Limit switch: With limit switch, the rolling curtain can
automatically stop when opening and closing to upper and
lower limit, and the repeated positioning error is less than
20mm.
▪ Equipped with reserve power supply and fuse breaker (automatic
shutdown function in case of fire) With self weight constant speed
drop function
▪ The rolling curtain can stop at any position Switch
Switch
31 Internal
Temperature controlled release device
▪
Fire shutter should be equipped with a temperature-
controlled release device. When the temperature
around the temperature sensing element of the
release device
reaches 73℃ ±0.5 ℃, the release device acts, and the
shutter should be closed according to its weight decline
▪
When the room temperature rises to 70 degrees.The
temperature-controlled material on the fuse plate will
melt automatically and the fuse segment will open.At
this time, the collision block is not affected by the
return of
the bending plate and the box cover and the
compression spring system in place, the separation
lever using the
pressure of the collision block will roll the door machine
ring sprocket and the brake wheel off, the door
rolling machine will automatically fall.
32 Internal
Electric cabinet
Main technical parameters
1、 The power supply parameters： Three-phase supply voltage range：
AC380V(-15%~+10%) Standby power capacity：DC12V/2.9AH
2、Output voltage：AC380V，Rated output power：≤1KW
3、Feedback contact capacity：DC30V/2A
4、Shower active output capacity：DC12V/500MA
5、Adjustable range of emergency stop delay time：For 30 seconds to
300 seconds
6、Fault response time：< 3 seconds
7、Fire linkage and fire detector action response time：< 3 seconds
8、Battery charge time：＜24 hours 9、Battery regular maintenance
time：60 days
9、Dimensions: length × width × height
360mm×240mm×70mm
33 Internal
Guide
▪ Main parameters:
▪ Molding mode: roll rolling, bending
▪ Guide rail size: 120*50*2
▪ Material optional galvanized steel plate, stainless steel.
34 Internal
Scroll
▪ Main parameters:
▪ The reel is made of electric welded steel
pipe, welded with flange and core shaft
according to the corresponding size, and
the surface is painted with antirust paint.
▪
Specifications are 114, 140,165,219 and
so on.
▪ The selection method is based on the ▪ Straight seam welded steel pipe Φ114 ×2.0
requirements of the deflection value ▪ Straight seam welded steel pipe Φ140 ×2.5
stipulated by the national standard: the ▪ Direct seam welded steel pipe Φ165 ×3.0
deflection value is less than 1/400 of the ▪
Straight seam welded steel pipe Φ219 ×4.0
length of the reel, and different ▪
Straight seam welded steel pipe φ273×5.0
specifications are selected through
calculation.
35 Internal
Thank you
assaabloy.com
Internal
