Product Overview Installing your Printer

Printer Cable

Power Cord

PRP-350
Kitchen Thermal Printer
Left Right
Quick Installation Guide
HOST PC

Printer

Front Rear

Printer

I/O Port Cover Power Cord

TOP Bottom RJ-45 RS-232

Specification Contents Installing the Paper Roll Paper Cutter

Model PRP-350
General
Print Method Thermal line printing
Print Speed 250mm/sec Cover Release Lever Warning: Paper Cutter
Print Life 150 Km Beware of the Paper Cutter while
Print Font (ASCII)
ANK Font installing or replacing the paper roll.
Font A: 12 x 24 dots, Font B: 9 x 17 dots
The sharp edge of Paper Cutter may
Print Font (Graphic ) Chinese character: 24 x 24 dots
Print Resolution 576 dots/line or 512 dots/line
cause injury to operator
International Font, Big 5 Chinese, GB Chinese,
Print Font Character Support
Japanese, Korean selectable
Character Per Line 48 (Font A) / 42(Font B)

Barcode Support
UPC-A, UPC-E, JAN-13/EAN-13, JAN-8/EAN-8, CODE 39, ITF, Printer Unit **Printer Cable *Power Cord
CODABAR, CODE 93, CODE 128, QR CODE
Effective Print Width 72mm
Paper Width 79.5mm± 0.5mm
Paper Thickness 0.06~0.08mm
Win 2000/ Win 2003/ Win XP/Win Vista/Win 7, Win 8, Pull out the paper
Driver
compatible with EPSON and SAMSUNG, OPOS Driver support
Print Command Compatible with ESC/POS commands set
Auto Cutter Partial
LED Indicator 3 and 2 Auxiliary Paper Indicator
Quick Installation Paper Roll Paper Roll
Audio Indicator 83 dB , with print job notification
Guide Holder Printer Cover
Paper End Detection Yes
Over-Heat Halt-on Protection Yes
Interface
Serial 1 x DB-9 Serial Port Paper Roll
Ethernet 1 x RJ-45 and
Others Paper Roll Holder Keep holding and slowly replace the
+24VDC/2.5A
Print Cover; press it into position with
Power Input (with External Adapter 100~240VAC 50/60Hz),
embedded in the body
care.
Color Black
Compliance FCC / CE / WEEE / RoHS
Make sure the cover is firmly closed.
Weight 1300 g ( with power adapter) * Power Cord is selectable depending on the types of electrical plug.
Dimension (mm) 190.5 (L) x 140 (W) x 145.0 (H) ** Printer cable is selectable depending on the interface required
Operating Temperature 5°C~45°C (RS-232 or RJ-45)
Operating Humidity 10% ~ 80% RH non-condensing *** RJ-45 cable is not supplied and need purchased separately.
Storage Temperature -10°C~ 50°C Please refer to the nearest local representatives for further information.
Installing the Driver of The Printer DIP Switch Configuration

1. Access the website www.fametech.com.tw and download 5. Enter printer name and select the port type 6. The driver is successfully installed. To change the setting of the printer manually:
the driver. (Serial or TCP/IP interface). Click “Finish” to exit the menu
1. Turn off the printer.
2. Double click the icon “SetupPRP.EXE” to initiate the You can click the checkbox to set the printer as default 2. Remove the DIP Switch Cover.
installation. printer. 3. Adjust the DIP switches to configure the printer.
Click “OK” to continue. 4. Re-install the DIP Switch Cover.
DIP Switch Cover

Note: DIP Switches

For Windows 7 / Vista and the later version,
Please Right-Click the icon and use
“Run as administrator” option while installing the Driver. DIP Function ON OFF
1 Paper Cutter No Yes
2 Audio Alarm Yes No
3 Print Density Dark Light
4 Two-Byte Character Code No Yes
7. Examine the Printer 5 Character Per Line 42 48
Now user can access to the “Devices and Printers” and 6 Printed Paper Detection No Yes
3. Click “Install” to continue. 6. Select the proper Port available examine the new printer. 7&8 Baud Rate Setting --- ----
(for Serial or TCP/IP interface)

Baud Rate Setting

19200 9600 115200 38400

4. Select “Install this driver software anyway”.

Note:
For Ethernet (TCP/IP) Interface Installation
Printing on the TCP/IP Port is only possible if both IP
Address (Printer and Computer) belongs to the same class.

Please consult the IT professional before installation and

refer to the instruction manual for further information.

IM-MANU-PRP-350-TYSSO-EP
20190128