Scribd
Upload
20 views3 pages

Exam 02 (Fall 2024)

.

Uploaded by

orangeshoe361
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views3 pages

Exam 02 (Fall 2024)

.

Uploaded by

orangeshoe361
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EMT1255 – ELECTRONICS LECTURE

EXAM 02

LastName: …………………………………………… FirstName: …………………………………

Description:
There are five (5) questions.
Answer all questions.
Write and sketch clearly.
Instruction:
The quiz takes 60 minutes (1 hour), and each question has equal weight in grade.
Show your work/ calculation clearly and be creative when solving the questions.

Ques on 01:
Determine the terminal voltages of each transistor with respect to ground for each circuit in
Figure A. Also, determine VCE, VBE, and VBC. βDC = 50. IB =VBB-VBE / RB
IE = IC + IB
VE = VB -VBE VC = VCC -(IC x
IE = VE / RE RC)
IC = IE
VCE = 1.4 V
VBE = 0.7 V VCE = VC- VE = 8.9V
VBC = -0.7 V VBE = VB - VE = 4.0V
VBC = VB - VC = -4.9 V

Figure A.
Ques on 02:
Determine each of the dc voltages, VB, VC, and VE, with respect to ground in Figure B.
(R2 /R1 +R2)Vcc = 4.7k ohm /22k ohm+4.7k ohm = 2.64V
VE = VB - VBE |||| VB - 0.7 = 1.94V
VC = VCC -IcRc ||| IE = VE / RE = 10.02V

Figure B.

Ques on 03:
a) Draw the schematic symbols for n-channel and p-channel D-MOSFETs and E-MOSFETs,
and label the terminals.
b) Explain why both types of MOSFETs have an extremely high input resistance at the gate.
Both types of MOSFETs, n-channel and p-channel, exhibit high input resistance at the gate
because the gate is isolated from the rest of the MOSFET structure by a thin layer of insulating material,
usually silicon dioxide
Ques on 04:
Determine the following dc values for the amplifier in Figure C.
(R2 /R1 +R2)Vcc = (12k / 47k+12k) 18 = 3.66V
VE = VB - VBE |||| VB - 0.7 = 2.96V
VC = VCC -IcRc = 8.23 V

Figure C.
Ques on 05:
For each circuit in Figure D, determine V DS and VGS.

Figure D.

You might also like