Qetaf Electrics The Highest QUALITY

Form No. QE-QMS-14-08-2022

SITE ACCEPTANCE TEST Issue 1 Rev. 0

Date:

Client: Customer Ref. No.:

Shop Order No: Project Name:
Item No: Drawing No.:
Qty: Panel Reference:

1. Service Specification
1.1 L-L voltage V 1.2 L-N voltage V 1.3 Wires

1.4 Frequency Hz 1.5 IP protection 1.6 Ambient Temp

1.7 I sc bus bar kA 1.8 Internal Separation 1.9 Insulation area

2. Visual Checks Result either (OK: Confirmed), (N/OK: Failed), (N/A: not applicable)
2.1 Components Labeling 2.2 Scratches
2.3 Panel Name Plates 2.4 Cleanness
2.5 Terminals Numbering 2.6 Cable entry/incoming
2.7 Cables Numbering (control wire) 2.8 Cable Entry/Outgoing
2.9 Cable Marking (power cable) 2.10 Bus Bar Marking
2.11 System Bas Bars

3. Conformity check of components Result either (OK: Confirmed), (N/OK: Failed), (N/A: not applicable)
3.1 Enclosures 3.2 Molded Case Circuit Breakers
3.3 Air Circuit Breakers 3.4 Miniature Circuit Breakers
3.5 Variable Speed Drives 3.6 PLC (Programmable Logic Control)
3.7 Soft starters 3.8 BMS Components
3.9 Contactors 3.10 Metering Components
3.11 Indication Components 3.12 Protection elements
3.13 MIMIC Diagrams 3.14 Auto transformer
3.15 Relays 3.16 UPS
3.17 Fuses 3.18 Power supply
3.19 Transformers (CT) 3.20 Transformers (VT)
3.21 Generator Protection & 3.22 Signaling Components
Synchronization Relays

4. Mechanical checks Result either (OK: Confirmed), (N/OK: Failed), (N/A: not applicable)
4.1 Tightness of Bolts & Screws 4.2 Interlocking mechanical operating
4.3 Breakers Opening & closing 5 times 4.4 Switches mechanical operating
4.5 Handles mechanically Operating 4.6 Torque marks for bolts of power circuits
4.7 Earthing Parts 4.8 Doors interlocking with breakers

Page 1 of 2
 Qetaf Electrics The Highest QUALITY

Form No. QE-QMS-14-08-2022

SITE ACCEPTANCE TEST Issue 1 Rev. 0

Date:

5. Electric Tests Result either (OK: Confirmed), (N/OK: Failed), (N/A: not applicable)
5.1 Phase Continuity L1 L2 L3 N E
Test
5.2 Megger L1-L2 insulation >1000MΩ E-N insulation >1000MΩ
Tests 1000V L1-L3 insulation >1000MΩ
DC Ω L3-L2 insulation >1000MΩ
L-N insulation >1000MΩ
L-E insulation >1000MΩ
5.3 Dielectric L1-L2 E-N
Test or H.V. L2-L3
Test 2.5kV AC
L3-L1
L-N
L-E

6. Functional tests Result either (OK: Confirmed), (N/OK: Failed), (N/A: not applicable)
6.1 Direct online starting 6.2 PLC control
6.3 Star delta Starting 6.4 BMS control
6.5 Auto transformer starting 6.6 Synchronization control
6.7 Soft starter starting 6.8 ATS control
6.9 Variable speed starting

7. Ambient Temperature During Testing

7.1 Temperature
7.2 Humidity

Testing Device Used Code No Notes

Megger KYORISTA 3005A
High Voltage Tester HT / POWER PHENIX 605-2PX
Digital Multimeter FLUKE 175
Torque Wrench 73-588 STANILEY

QC Comments:

QC Technician: ---------------------------------------. Signature: ------------------------. Date: ----------------------.

QC Manager: ---------------------------------------. Signature: -------------------------. Date: ----------------------.

Client: --------------------------------------------------. Signature: --------------------------. Date: ----------------------.

CONTROLLED
Page 2 of 2