DS ML640Ex
DS ML640Ex
The ML640E Ethernet Access Device (EAD) from All ML640E EAD models provide 802.1q VLAN-aware wire-speed
Actelis® is an advanced intelligent Ethernet service bridging, double tagging (VLAN stacking) for end-user VLAN
delivery access unit. Using the existing copper network, transparency, VLAN translation, L2, L3 and L4 classification with eight
traffic classes, RSTP/STP, ERPS, bandwidth monitoring, Multicast/
the ML640E can deliver up to 230 Mbps of symmetrical
Broadcast limiting, as well as IGMP snooping for video distribution
Ethernet traffic at fiber quality over existing voice-grade applications.
copper. The ML640E comes in three models capable of
supporting 4, 8 or 16 copper pairs, and has 2 optional Powered by Actelis’ award-winning, patented EFMplus™ technology,
the rate, reach and reliability are increased significantly using
SFP interfaces supporting 100/1000Base-FX optical advanced Dynamic Spectrum Management (DSM) and Dynamic
connections. It offers CE 2.0 services on all its ports - Rate Boost (DRB) techniques. EFMplus technology provides the best
both copper and fiber. rate/reach performance and most resilient fiber-quality transmission,
The ML640E EAD can be deployed back-to-back, in a Point-to- ensuring carrier-class reliability. When combined with Actelis’ industry-
Point topology or in Multi-Point topologies with Actelis’ ML2300/ leading XR239 EFM Repeaters, these technologies can extend reach
ML230 Ethernet aggregation switches. With its superior performance, even further.
extensive functionality and low cost, the ML640E EAD offers rapid The ML640E EADs provide proactive and dynamic tools for enhanced
CE2.0 service delivery and allows for complete utilization of the trouble shooting and monitoring capabilities. Advanced Carrier-
existing network infrastructure. class EFM OAM, including 802.3ah, CFM (802.1ag), Y.1731 (ITU),
The ML640E EAD is interoperable with any standard Ethernet Y.1564 embedded traffic generator and Ethernet Loopback with
switch, router or hub. Compliant with Metro Ethernet Forum (MEF) MAC/IP swapping. TWAMP lite reflector and IP probe capabilities
CE2.0 specifications, ML640E EADs seamlessly integrate into carrier are supported by the product, offering both physical link as well as
Ethernet networks. Equipped with four 10/100/1000Base-T Ethernet service level end to-end advanced troubleshooting mechanisms.
interfaces and 2 optional 100/1000Base-FX Small Form Factor (SFP) The ML640E EADs can be managed In- and Out-of-Band by the
ports, the ML640E EAD allows assignment of a service or a customer MetaASSIST™ View graphical craft application and via the multi-
per port. DS3/E3 uplinks can be used to connect to legacy networks platform Element Management System, MetaASSIST EMS. The
instead of the 100/1000Base-FX SFPs. management protocols include standard command line interface,
Service providers utilizing the ML640E intelligent EAD can offer Telnet and SNMP using standard MIBs for seamless integration with
CE 2.0 based services with comprehensive bandwidth control third-party Network Management Systems (NMS).
and traffic management features. The ML640E’s flexible service
provisioning using Ethernet Virtual Connections (EVCs), along with
its advanced mapping and Hierarchical Quality of Service (H-QoS)
capabilities, allows carriers to maximize the efficiency of the access
bandwidth on all their ports and configurations. Service Level
Agreements (SLAs) can be easily enforced per each subscriber
enabling service providers to safely aggregate multiple services or
multiple subscribers, on the same Ethernet access uplink.
Specifications
Interfaces • EFM OAM: IEEE 802.3ah clause 57 inc. Dying Gasp Alarm Contacts
Ethernet (Network/User) • CFM/MEF OAM: IEEE 802.1ag , ITU Y.1731 • Terminal Block: 2 Input, 1 Output Physical
• 10/100/1000 Base-T: 4 ports • ITU SAM: Y.1564 traffic generator/analyzer
• Loopback: L2/L3 - MAC/IP swap,
Physical
Connector: RJ45, Auto-MDIX
wire-speed CFM loopback by LBM-LBR • Dimensions Height: 1.6” / 40 mm (1U)
• 100/1000Base-FX: 2 ports (option)
• TWAMP lite-reflector: RFC 5357; IP Probe Depth: 11.0” / 280 mm, Width: 8.4” / 213 mm
Connector: SFP based, MSA compliant
• Weight: 3.75 lbs / 1.7 Kg
High Speed Link (Bonded Copper Pairs) Quality of Service Features • Mounting Rack: 2 units in 19”, 23” or ETSI racks
• Protocol: IEEE 802.3ah 2Base-TL • Classes of Service (queues per port): 8 Desktop, Wall Mount
• Line code: ITU-T G.991.2 rev. 2 • Two Levels Hierarchical Scheduler (H-QOS), up to • Power
• Bandwidth: 1- 230 Mbps (symmetrical) 64 queues per port, WFQ, SP, Hybrid DC: 24/48 Vdc nominal (20-60 Vdc range),
up to 15 Mbps per pair , bonding up to 16 pairs • Bandwidth Control: 32 profiles, 2 rate, 3 color 15-24 Watt (per model)
• Number of Copper Pairs: 4, 8, 16 metering (CIR, CBS, EIR, EBS) AC: 90-264 VAC, 47-63 Hz, up to 30 Watt
Connector: RJ45 (per modem/pair ML644E/8E, • EVCs: 32 Services
2 modems/pairs per connector with ML6416E ) • Classification: 128 rules (Port/VLAN/L2 L3/L4)
Environmental
• End-to-end Delay: 2-4 ms (typical) • Operating Temp: -40° to +65°C
• Shaping: per queue/port
• Spectral Compliance: ITU-T G.991.2 annex A, B, F, • Storage Temp: -40° to +70°C
• Color Mode Awareness by COS or DEI
G, ETSI TS 101 524 annex E, ANSI T1.417, T1.426 • Relative humidity: Up to 95%, non-cond.
• CoS Marking: by COS or DEI, per Service
Per-country regulatory compliant spectral modes
• Spectral Friendliness: Management Regulatory Certifications/Compliance
Dynamic Spectral Shaping (DSS) Applications Metro Ethernet Forum
• Cross-talk Cancellation: • EMS: MetaASSIST EMS • CE 2.0 1
Dynamic Rate Boost (DRB) 3 • Craft GUI: MetaASSIST View Safety
• Sealing Current 48 VDC/1.5 mA nominal Protocols • UL 60950, CSA C22.2 60950
Management (Out-of-Band) • IPV4 and IPV6 • EN 60950-1, IEC 60950-1
• 10/100Base-T Connector: RJ45, Auto-MDIX • DHCP Client: RFC 2132 EMC
• Craft EIA RS-232 (DCE) Connector: DB9 • ACS Client, CWMP: TR-069 • FCC Part 15 Class B
Ethernet Bridge Features • Command Line Interface: TL1, CLI • ICES-003 Class B
• Bridging: IEEE 802.1q • Remote Access: Telnet • ETSI EN 300 386 Class B
• Forwarding Database size: 16K MAC addresses • SNMP: V3, V2C, V1 • ETSI ETS 300 132-2
• MTU: 1518 – 2048 Bytes (configurable per system) • Radius Authentication: RFC 2865 • ITU-T K.20, K.21
• TPID: up to 4 settable per inner/outer tag • Secure Access (option): SSH v2 NEBS
• Aging: Configurable • Time Synchronization: SNTP v3 • GR-1089-CORE, GR-63-CORE
• MAC Limiting and Filtering • Web Access: HTTP CE
• Multicast/Broadcast Control • File transfer: FTP, TFTP • EMC and Safety
• Port based VLAN Stacking (Q-in-Q) • Syslog: RFC 3164 Environmental
• Conditional VLAN Stacking • GR-63-CORE
• VLANs: 4K, supports VLAN translations Front Panel Indicators (LEDs) • ETSI ETS 300 019
• RSTP, STP: IEEE 802.1d •
Power
• Link Aggregation: IEEE 802.3, L2/L3 balancing • Status
• Provider Bridges: IEEE 802.1ad • Alarm
• LLDP: IEEE 802.1ab • MLP per modem/pair
(1)
Certification in progress for ML6416E
• IGMP Snooping: RFC 4541, V1/V2 RFC 1112/2236 • ACT (Activity) (2)
DRB on ML6416E - Only on PTP topologies
• ERPS: ITU-T G.8032 • LNK (Link) per Ethernet/HSL port
Actelis Networks® is the leading global supplier of Carrier Ethernet over Copper broadband solutions for telecom service providers, enterprises and municipalities. Deployed by more than
350 customers worldwide, Actelis is accelerating broadband services to businesses and residential subscribers through award-winning products and technologies. All content included in this
document is the exclusive property of Actelis Networks, Inc., and protected by U.S. and international copyright laws. Specifications are subject to change without notice. Actelis® and Actelis
Networks® are registered trademarks. EFMplus™ and MetaASSIST™ are trademarks of Actelis. Any other trademarks used herein are the property of their respective owners. Copyright ©2014.
All Rights Reserved. Learn more at www.Actelis.com.
08.18.15