Technical Information Release
— S50–90 Series Poseidon™
Multiphase Pump
Reference: gas handling
Version: B
Release Date: 28-Oct-2002
EDMS UID: 274762883
Produced: 13-Apr-2004 21:18:00
Owner: Artificial Lift Engineering — BPC
Author: Dwight Chilcoat
Confidential
Copyright © 2004 Schlumberger, Unpublished Work. All rights reserved.
Intentionally Blank
Confidential
Copyright © 2004 Schlumberger, Unpublished Work. All rights reserved.
Technical Information Release — S50–90 Series Poseidon™ Multiphase Pump / Legal
Information
Legal Information
Copyright © 2004 Schlumberger, Unpublished Work. All rights reserved.
This work contains the confidential and proprietary trade secrets of Schlumberger
and may not be copied or stored in an information retrieval system, transferred,
used, distributed, translated or retransmitted in any form or by any means,
electronic or mechanical, in whole or in part, without the express written
Artificial Lift Engineering — BPC\Dwight Chilcoat\gas handling\B\Release Date: 28-Oct-2002\EDMS UID: 274762883\Produced: 13-Apr-2004 21:18:00
permission of the copyright owner.
Trademarks & service marks
"Schlumberger", the Schlumberger logotype, and other words or symbols used
to identify the products and services described herein are either trademarks,
trade names or service marks of Schlumberger and its licensors, or are the
property of their respective owners. These marks may not be copied, imitated
or used, in whole or in part, without the express prior written permission of
Schlumberger. In addition, covers, page headers, custom graphics, icons, and
other design elements may be service marks, trademarks, and/or trade dress
of Schlumberger, and may not be copied, imitated, or used, in whole or in part,
without the express prior written permission of Schlumberger.
A complete list of Schlumberger marks may be viewed at the Schlumberger
Oilfield Services Marks page: http://www.hub.slb.com/index.cfm?id=id32083
Confidential
Copyright © 2004 Schlumberger, Unpublished Work. All rights reserved.
Technical Information Release — S50–90 Series Poseidon™ Multiphase Pump / Document
Control
Document Control
Owner: Artificial Lift Engineering — BPC
Author: Dwight Chilcoat
Reviewer: Business Development
Approver: Business Deveolpment
Artificial Lift Engineering — BPC\Dwight Chilcoat\gas handling\B\Release Date: 28-Oct-2002\EDMS UID: 274762883\Produced: 13-Apr-2004 21:18:00
Contact Information
Name: Artificial Lift Engineering — BPC
Revision History
Rev Effective Date Description Prepared by
A 28-Oct-2002 release for commercialization Dwight Chilcoat
B 13-Apr-2004 added S50–90 designation Bob Thrasher
Confidential
Copyright © 2004 Schlumberger, Unpublished Work. All rights reserved.
1-1 Technical Information Release — S50–90 Series Poseidon™ Multiphase Pump / 1-1
Technical Information Release — S50–90 Series Poseidon™ Multiphase Pump
1 TECHNICAL INFORMATION RELEASE —
S50–90 SERIES POSEIDON™ MULTIPHASE
PUMP Completion Systems,AGH, Submersible Elec tric
Pumps,Poseidon
1.1 Product Description
The presence of free gas in a centrifugal pump causes degradation of the
head and flow performance. Conventional submersible pumps have not been
considered for applications when more than 15% free gas is present at the intake.
AL Engineering\Dwight Chilcoat\none\A\Release Date: 28-Oct-2002\EDMS UID: 274757836\Produced: 13-Apr-2004 21:18:00
The S50–90 Series Poseidon multiphase pump is a mechanical pre-conditioner
that increases the fluid mixture pressure in order to compress the gas to a point
where the fluid can be pumped with a submersible pump. The free-gas bubbles
are compressed until their volume decreases to a point where the vapor-to-liquid
ratio becomes much smaller. Additional compression above bubblepoint causes
the gas to go into solution, further decreasing the vapor volume while increasing
the liquid volume. The fluid then begins to behave more like a single-phase fluid.
This technical information release provides information required to install the
S50–90 Series Poseidon multiphase pump. The S50–90 Series Poseidon
multiphase pump is specifically designed to be used with the higher volume 540–
and 538–series submersible pumps.
1.2 Installation Procedures
The S50–90 Series Poseidon multiphase pump should be installed using the
pump installation procedures provided in the Artificial Lift Submersible Systems
Field Service Manual. It should always be placed between the intake/gas
separator and pumps.
The S50–90 Series Poseidon multiphase pump utilizes the CR-style thrust
design and requires shimming. Shimming procedures are provided in the
Artificial Lift Submersible Systems Field Service Manual.
Installation Tools
Part numbers for installation tools are shown in Table 1-1.
Confidential
Copyright © 2004 Schlumberger, Unpublished Work. All rights reserved.
1-2 Technical Information Release — S50–90 Series Poseidon™ Multiphase Pump / 1-2
Technical Information Release — S50–90 Series Poseidon™ Multiphase Pump
Table 1-1: Installation Tools and Part Numbers
Tool Part Number
thrust setting tool: 540 protector-to-Poseidon 1083930
speed handle, 3/8–in drive 580431
Allen hex socket: 5/16 in, 3/8–in drive 747105
Allen hex: 5/16–in ball-end bit 832683
torque wrench adapter: 5/8 in X 3/4 in box end, 47233
1/2–in drive
Allen hex wrench: 5/16–in long arm 593640
combination wrench: 5/8 in 594044
spline wrench: 7/8 in X 1 in 7591
538–series friction clamp 1148899
AL Engineering\Dwight Chilcoat\none\A\Release Date: 28-Oct-2002\EDMS UID: 274757836\Produced: 13-Apr-2004 21:18:00
1.3 Connection Tables
Connection details and part numbers for assembly o-rings are shown in Table
1-2. Connection details, part numbers for assembly hardware and torque settings
are shown in Table 1-3.
Table 1-2: Connections and Assembly O-Rings
Connection O-Ring
Size AFLAS HSN
538 and 540 S50–90 Series 2–237 1042605 812776
pump, 1.00 Poseidon
SFT
538 and 540 S50–90 Series 2–237 1042605 812776
pump, 0.87 Poseidon
SFT
S50–90 Series 538 and 540 2–237 1042605 812776
Poseidon intake/gas
separator, 1.18
SFT
Confidential
Copyright © 2004 Schlumberger, Unpublished Work. All rights reserved.
1-3 Technical Information Release — S50–90 Series Poseidon™ Multiphase Pump / 1-3
Technical Information Release — S50–90 Series Poseidon™ Multiphase Pump
Table 1-3: Connections, Assembly Hardware and Torque Settings
Connection Coupling Carbon Carbon Monel Monel Wrench Torque
Steel Steel Screw Lock- Size Setting
Screw Lock- washer With
washer Adapter
Wrench
538 and S50–90 155192 0068973 0307223 0118190 0310086 5/8-in 26 lbf.ft
540 pump, Series (11) (11) (11) (11) hex
1.00 SFT Poseidon
538 and S50–90 208538 0068973 0307223 0118190 0310086 5/8-in 26 lbf.ft
540 pump, Series (11) (11) (11) (11) hex
0.87 SFT Poseidon
S50–90 53 and 284729 0068973 0307223 0118190 0310086 5/8-in 26 lbf.ft
Series 540 (11) (11) (11) (11) hex
Poseidon intake/gas
separator,
1.18 SFT
AL Engineering\Dwight Chilcoat\none\A\Release Date: 28-Oct-2002\EDMS UID: 274757836\Produced: 13-Apr-2004 21:18:00
Confidential
Copyright © 2004 Schlumberger, Unpublished Work. All rights reserved.