AEROSOLS TECHNICAL DATA RO-01

V2100 SYSTEM
ENAMEL AEROSOL

.DESCRIPTION AND USES . PRODUCT APPLICATION (cont.) .

®
Rust-Oleum V2100 System Enamel aerosols are available in high- SAFETY
gloss, semi-gloss, flat, metallic and fluorescent finishes. They apply
easily and dry fast to a tough, attractive corrosion-resistant finish V2124838 Safety Blue
featuring superior coverage, color, and gloss retention and resist V2133838 Safety Green
chipping, cracking and peeling. They are available in a variety of V2155838 Safety Orange
colors including safety and fluorescent colors, and many match V2167838 Safety Purple
popular Rust-Oleum Industrial Enamel gallon colors for easy touch- V2163838 Safety Red
ups. Not for use on galvanized steel. V2143838 Safety Yellow
Primer aerosols are used for maximum corrosion protection on clean, ENAMELS
rusted or previously painted metal. Not for use on galvanized steel. V2102838 Crystal Clear
They are fast dry, quick recoat rust inhibiting primers designed for use V2170838 Almond
with the V2100 System Enamel aerosols to optimize corrosion
V2115838 Silver Aluminum
control.
V2171838 Tan
Galvanizing aerosols are zinc-rich coatings that provide maximum V2119838 Stainless Steel
corrosion resistance through galvanic protection. Use for touch-up V2175838 Chestnut Brown
and repair to damaged galvanized steel; production welds, V2123838 Light Blue
galvanized ducts, storage tanks, fences, gutters, trucks, trailers, off- V2177838 Semi-Gloss Black
shore drilling rigs, utility towers, and more. V2185838 meets V2178838 Flat Black
performance requirements of ASTM A-780-01 (par. 4.1.2, 4.1.3, V2125838 Deep Blue
4.2.2). Do not topcoat with an alkyd finish. V2179838 Gloss Black
V2183838 Light Machine Gray
.PRODUCTS . V2134838 Bright Green
V2184838 Dove Gray
PRIMERS V2137838 Dark Green
V2187838 Dark Machine Gray
209566 White Clean Metal Primer
V2138838 Hunter Green
V2169838 Red Primer V2188838 Smoke Gray
V2182838 Gray Primer V2190838 Flat White
HIGH HEAT COATING V2147838 Industrial Yellow
V2192838 Gloss White
V2116838 High Temperature Aluminum V2148838 Equipment Yellow
V2176838 High Temperature Black V2196838 Fleet White
V2156838 Equipment Orange
GALVANIZING
V2164838 Bright Red
V2117838 Bright Galvanizing Compound 209565 Anodized Bronze
V2185838 Cold Galvanizing Compound 209567 Semi-Gloss White
FARM EQUIPMENT MINI SPRAYS – 3oz
209713 John Deere Green
209714 John Deere Yellow 276011 Gloss Black
209715 Caterpillar Yellow (Old) 276013 Gloss White
276015 Safety Yellow
209716 Allis Chalmers Orange
276018 Spot Primer†
209717 International Harvester Red † V2100 System Rust Reformer® formula – for use on rusted steel only.
209718 Ford Blue
FLUORESCENTS .PRODUCT APPLICATION .
2233838 Fluorescent Green
2255838 Fluorescent Orange SURFACE PREPARATION
209568 Fluorescent Pink ALL SURFACES: Remove all dirt, grease, oil, salt and chemical
2264838 Fluorescent Red contaminants by washing the surface with Pure Strength®
2242838 Fluorescent Yellow Cleaner/Degreaser item #3599402, commercial detergent, or other
suitable cleaner. Mold and mildew must be cleaned with a
chlorinated cleaner or bleach solution. Rinse with fresh water and
allow to dry.

1 Form: 2045990
Rev.: 012714
 TECHNICAL DATA

V2100 SYSTEM ENAMEL AEROSOL

.PRODUCT APPLICATION (CONT.) . .PRODUCT APPLICATION (CONT.) .

STEEL: Hand tool (SSPC-SP-2) or power tool (SSPC-SP-3) clean to Use primer on bare or rusted surfaces. Do not use any primer
remove loose rust, mill scale, and deteriorated previous coatings. with V2116838 High Temperature Aluminum, V2176838 High
Temperature Black, V2117838 Bright Galvanizing Compound or
PREVIOUSLY COATED: Previously coated surfaces must be sound
V2185838 Cold Galvanizing Compound.
and in good condition. Smooth, hard, or glossy finishes should be
scarified by sanding to create a surface profile. Removal of old paint Protect surrounding surfaces from overspray. Overspray can
by sanding, scraping or other means may generate dust or fumes carry a significant distance. Shake can for one minute after
that contain lead. Exposure to lead dust or fumes may cause mixing ball is heard. Hold can 10-14 inches from surface. Apply
adverse effects, especially in children or pregnant women. Controlling several light coats a few minutes apart to avoid drips and runs.
exposure to lead or other hazardous substances requires the use of Recoat within 1 hour or after 24 hours; allow more time in cooler
proper protective equipment, such as a properly fitted respirator
temperatures. Clean valve immediately after use by turning can
(NIOSH-approved) and proper containment and cleanup. For
additional information, contact the U.S.EPA/Lead Information Hotline
upside down and depressing spray button for 3-5 seconds
at 1-800-424-LEAD. (some paint will be sprayed out, so be careful to not inadvertently
spray yourself or other objects). If clogged, remove tip and clean
APPLICATION in thinner. Do not insert any object into can valve opening.
Use when temperature is above 50°F (10°C) and humidity is Properly discard empty container. Do not burn or place in trash
below 85% to ensure proper drying. Surface temperature must compactor. Empty container can be recycled.
be between 50-100°F (10-38°C).

2 Form: 2045990
Rev.: 012714
 TECHNICAL DATA

V2100 SYSTEM ENAMEL AEROSOL

. PHYSICAL PROPERTIES .

ENAMELS PRIMERS GALVANIZING HIGH HEAT

Resin Type V2102838, V2115838, Modified alkyd Epoxy ester V2116838: silicone blend
V2119838: acrylic; all others: and acrylic V2176838: silicone
modified alkyd modified alkyd
Zinc phosphate, zinc molybdate, talc, V2117838 contains 80% zinc and 12% V2116838: aluminum flake
Pigment Type Varies calcium carbonate, red iron oxide aluminum (in the dry film) V2185838
(V2169838), titanium dioxide, carbon contains 93% zinc (in the dry film) V2176838: black
black (V2182838) manganese ferritre
Volatile Organic Finishes: <65% by weight <60% by weight <60% by weight <80% by weight
Metallics: <80% by weight
Compounds
MIR Finishes: Max value of 1.4 Maximum value of 1.2 Maximum value of 1.2 Max value of 1.85
Metallics: Max value of 1.9
V2102, V2115, V2119 and all fluorescents: 14
Fill Weight oz. (398 g.); 15 oz. (426 g) 20 oz. (568 g) 15 oz. (426 g)
All others: 15 oz. (426 g)
Mini Spray 3 oz.
Mini Spray 3 oz.
Finishes: 25.9-36.0; V2116838 High Heat Aluminum: 10.9
Theoretical Coverage Fluorescents: 26.8-28.6
31.6-32.4 24.1-26.4 V2116838 High Heat Black: 25.2
Rate @ 1 mil DFT V2102838 Clear: 21.5
V2115838 Aluminum: 11.5
Mini Spray 6.3-6.5
Sq. ft. / aerosol V2119838 Stainless Steel: 12.5
Mini Spray: 5.2-7.2

Recommended Dry Film 1-2 mils (25-50µ) 1-2 mils (25-50µ) 1-2 mils (25-50µ) 1-2 mils (25-50µ)
Thickness (DFT) Per Coat
V2100 finishes: approx. 14 sq. ft. (1.3 m2)
Practical Coverage at Fluorescent finishes: approx. 10 sq. ft. (0.9 m2) Approximately Approximately Approximately
Recommended DFT Mini Spray: approx. 3 sq. ft. (0.7 m2) 14 sq. ft. (1.3 m2) 14 sq. ft. (1.3 m2) 14 sq. ft. (1.3 m2)
Sq. ft. / aerosol Mini Spray: approx. 3
sq. ft. (0.7 m2)
V2116838: 10-20 minutes
Dry Times at Tack-free 10-20 minutes 10-20 minutes 10-20 minutes V2176838: 2-4 hours
70-80°F V2116838: 1-2 hours
(21-27°C) and Handle 1-2 hours 1-2 hours 1-2 hours V2176838: 4-7 hours
50% rel. hum. Within 1 hour or after 24 hours* Within 1 hour or after 24 hours** V2116838: anytime
Recoat At any time V2176838: within 1 hour or after 24
hours

Dry Heat Resistance 200°F (93°C) 200°F (93°C) 200°F (93°C) 1000°F (538°C)
Shelf Life 5 years 5 years 5 years 5 years
Specifications Can be used in USDA-regulated facilities based on FSIS directive 11,000.4 (Rev. 4),
November 24, 1995. Agriculture Canada accepted.
Safety Contains Acetone, xylene, toluene (fluorescents also contain hexane), and liquefied petroleum gas propellent
Information Warning! THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. DANGER!
EXTREMELY FLAMMABLE. MAY CAUSE FLASH FIRE. CONTENTS UNDER PRESSURE.
VAPOR HARMFUL. FOR INDUSTRIAL OR COMMERCIAL USE ONLY. SEE THE PRODUCT
MATERIAL SAFETY DATA SHEET (MSDS) AND LABEL WARNINGS FOR ADDITIONAL
SAFETY INFORMATION.
Calculated values are shown and may vary slightly from the actual manufactured material.
*Allow more time in cooler temperatures
**Do not topcoat galvanizing compounds with an alkyd finish.

The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.

Rust-Oleum Corporation Form: 2045990

11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 012714
Vernon Hills, Illinois 60061 www.rustoleum.com/industrial
An RPM Company