TECHNOLOGY AND LIVELIHOOD EDUCATION

TECHNICAL DRAFTING 8
FIRST QUARTER EXAM

I. Multiple Choice:

Directions: Read the statements carefully. Choose the letter of the best
answer.
Write it on a separate sheet of paper.

1. Single slot head: flat screwdriver: hexagonal slot head:

a. Allen screw b. flat screw c. Philip screw d.Stubby

screw
b. d. Triangle

2. While working on a project, you're instructed never to cut the paper along its
working edge, as it can easily damage the plastic. Which drafting tool should
you handle with care to avoid this issue?

a. Compass b. Pencil c. Ruler d. T-square

3. You're given a precautionary guideline: "Do not put oil on the joints of the
legs." Which drafting tool should you refrain from applying oil to?

a. Compass b.Pencil c. Ruler d. T-square

4. In order to maintain a drawing tool's smoothness, you're advised not to leave

any kind of marks on it. Which item should you avoid marking?

a. Compass b.Pencil c.Drawing board d.Eraser

5. To ensure accurate and precise work, it's important to always keep the lead
sharp. Which tool should have its lead consistently sharp?

a. Divider b.Compass c. T-square d.Pencil

6. When working on your project, you're reminded that it should not be crumpled
or wet. What item or surface should you avoid crumpling or wet?

a. Compass b.Divider c.Drawing paper d.Drawing board

7. You're cautioned not to prick it with needle points of either the divider or
compass when taking measurements. Which tool should be handled carefully
to avoid pricking it?

a. Ruler b.Scale c.T-square d.Technical pen

8. What type of drawing where it is called as the free expression of art with the
use of lines, dimension and symbols?
 a. Technical drawing b.Freehand drawing c. Designing d. Mechanical
Drawing

9. Show the outline of the object (in medium weight) once it has been drawn;
thus, otherwise known as “object lines”.

a. Visible Line
b. Hidden Line
c. Cutting Plane Line
d. Short Break Line

10. You're advised not to use it for any rough purposes. Which drafting tool should
not be used for rough tasks?

a. Technical pen b. T-square c.Drawing board d.Scale

11. It's essential not to use it as a ruler. Which item should you avoid using as a
ruler?

a. scale b. protractor c. Triangles d. A T-square

12. You're reminded not to use it as a substitute for thumbtacks in fastening the
drawing paper on the drawing board or tabletop. Which tool should you avoid
using for this purpose?

a. Compass/divider b.Scale c.Triangle d.Drawing board

13. Is a document used to notify a company of the tools or materials needed to

perform a certain task.
a. inspection report
b. material inventory form.
c. inspection request form
d. purchase requisition slip

14. Caused by accidentally or deliberately hitting the edges of these tools on a

hard surface

a. Cracks b.Rusting c.Blocking/clogging d.Chipped/nicked

edges

15. Chambers are sometimes blocked because of broken lead or dry ink.

a. Rusting b.Missing part c.Warped surfaces

d.blocking/clogging

16. Is used to state the condition of the drafting tools and equipment that are used
or inspected specifically if defects or damages are found.
a. Inspection report
b. Material Inventory form
c. Inspection request form
d. purchase requisition slip

17. Dulled printed hatch marks on the surface of measuring instruments.

a. Faded hatch b. Missing part c. Warped surfaces d.Cracks

18. A list that identifies all the things needed to borrow or request before doing a
drafting task
a. inspection request form
b. visual inspection report
c. purchase requisition slip
d. tools/ materials checklist

19. Some accidents in the workplace can be avoided by

a. Giving first aid
b. calling a doctor
c. concentrating on your work
d. bringing to the nearest hospital

20. Is a record that lists the tools and equipment that have been issued to and
returned by certain individuals in the workplace.
a. borrower’s slip
b. borrower’s log
c. inspection report
d. purchase requisition slip

30. Occurs when tools are dropped on the floor.

a.cracks b.missing part c.warped surfaces d.faded hatch

marks

31. Which of the list of documents should a drafting student be familiar with?

a. borrower’s log
b. borrower’s slip
c. inspection report
d. purchase requisition slip

32. What should be done to prolong the lifespan of metal drafting tools?

a. clean with water.

b. leave under the sun
c. clean and dry it.
d. clean, dry, and keep in a safe place.

33. How will you convert 4 meters into centimeters?

a. 400 m
b. 4 m x 100 cm =
c. 4 meters x 100 cm =400 cm
d. 4 meters/100 cm =4 cm

34. These lines are considered the Alphabet of lines used in drafting technology.

a. visible line, hidden line, broken line, line segment

b. visible line, invisible line, rugged line, running line
c. visible line, hidden line, center line, dimension line.
d. dotted line, line segment, continuous line, broken line.

35. How will you convert the measure of 4/16 of an inch into a decimal number?

a. 4/16=¼
 b. 4/16=¼= 10/4
c. 4/16 =¼ = 1.0 divide by 4
d. 4/16=¼=1.0 divide by 4=0.25cm

36. If you have a ladder that is 8 feet long and you want to know its length in
inches, which process will you follow?

a. 8 feet x 12
b. 8ft x 12= 96
c. 8 divided by 12
d. 8 ft x 12 inches= 96 inches

37. Which of the following is the correct group of lines used in drafting?

a. rugged line, open line, zigzag line, visible line

b. open line, rugged line, zigzag line, crooked line.
c. open line, visible line, running line, hidden line
d. visible line, hidden line, extension line, dimension

38. Which is the correct list of tools used in technical drafting?

a. compass, ruler, pliers, mallet

b. scissors, ruler, needle, thimble,
c. pliers, screwdrivers, mallet, ruler
d. compass, ruler, T-square, divider

39. Mara wanted to measure the lines used in making orthographic projections of
her dream house. Which of the list of measuring tools will she borrow from the
property custodian?

a. pencil, t-square, ruler

b. compass, t-square, ruler,
c. ruler, tape measure, wrench,
d. tape measure, scissors, needle

40. What colors are used to identify the top view, front view and right view in
orthographic projection in activity?

a. red, blue, green

b. blue, green, yellow
c. red, purple, orange
d. purple, yellow, orange.

41. Show the outline of the object (in medium weight) once it has been drawn;
thus, otherwise known as “object lines”.

a. Cutting Plane Line

b. Short Break Line
c. Visible Line
d. Hidden Line

42. Which type of drawing where it visually communicates on how something

functions or constructed with the aid of AutoCad?
 a. Technical drawing
b. Mechanical drawing
c. Freehand drawing
d. Prohibition signs

43. These are regulatory signs which indicate that an instruction must be carried
out.

a. Fire Signs
b. Mandatory signs
c. Danger Signs
d. Prohibition signs

44. Signs which warn of hazard or hazardous condition that is likely to be life
threatening.

a. Fire Signs
b. Mandatory signs
c. Danger Signs
d. Prohibition signs

45. Some accidents in the workplace can be avoided by

a. giving first aid

b. calling a doctor
c. concentrating on your work
d. bringing to the nearest hospital

46. What safety measure is immediately given to the seriously injured person?

a. giving first aid

b. calling a doctor
c. concentrating on your work
d. bringing to the nearest hospital

47. Which of the following can help to prevent falls?

a. Walk fast
b. Clean your area if necessary
c. Watch your steps occasionally
d. Keep the floor clean and dry always

48. To stop severe bleeding, what safety measure is given?

a. Call a doctor immediately

b. Wash the wound with water
c. Cover the wound with cotton
d. Press the wound with any object

49. Which of the following is NOT a Personal Protective Equipment (PPE) used for
construction workers.

a. Apron
b. Head protection
c. Eye protection
 d. Protective gloves

50. Prohibition signs use the colors EXCEPT one, which one is it?

a. Red
b. Blue
c. White
d. Black
 Republic of the Philippines
DEPARTMENT OF EDUCATION
Technology and Livelihood Education – Electrical Installation and Maintenance 10
FIRST PERIODICAL EXAM
TABLE OF SPECIFICATIONS
Topic Time Spent/ Levels of Learning
Frequency
Remembering Understanding Applying Analyzing Evaluating Creating No. of
Items

1.Personal entrepreneur competency

4 1, 3 2, 4,5 5
(PECs)

2. Environment and Market (EM) 4 6,7, 8.10 9 5

3. Requesting Tools, Equipment, and 13,17,19,20,24 11,12,25,26,27,

Materials
4 14,15,23, 16,18,21,22 20
,29,30 28

4. Inspecting and reporting

4 34,35 36, 31,32,33,37,38, 39,40 10
Damaged tools

5. Install electrical lighting systems,

40 43,44, 41,42,45,49,50 46,47,48 10
auxiliary outlets and lighting fixtures

TOTAL 56 Hours 15 15 11 4 5 50

Prepared by: Checked by: Noted by:

T.L.E. Teacher T.L.E. Department Head Assistant Principal - CID