®

Artifical Lift Products

• Valves
• Latches
• SPM
• IGV’s

Artificial Lift Products CPP5646

 ®

N Series Gas
Lift Valve
CN01343

Valve Closed Valve Open

Artificial Lift Products

 ®

LN Series
Proportional
Response Gas Lift
Valve
CN01339

Valve Closed Valve Open

Artificial Lift Products

 ®

Chemical
Injection Valve
CN01351

Valve Closed Valve Open

Artificial Lift Products
 ®

Liquid Flow
Regulator
CN01354

High Differential Low Differential

Artificial Lift Products
 ®

O Series
Orifice Valve
CN01347

Valve Closed Valve Open

Artificial Lift Products
 ®

S Series Shear
Orifice Valve
CN01349

Valve Closed Valve Open

Artificial Lift Products
 ®

D Series
Dummy Valve
CN00950

Artificial Lift Products

 ®

ED Series
Equalizing
Dummy Valve
CN01352

Artificial Lift Products

 ®

WF Series
Gas Lift Valve
CN01345

Valve Closed Valve Open

Artificial Lift Products

 ®

Bk-2 and RK Latches

for G-Profile
1 1/2-inch RK and 1-inch BK-2
Latches are designed for installation
in G-type pocket profile side pocket
mandrels. They utilize a locking ring
which is held in position by spring
force. As the latch enters the side
pocket profile, the locking ring moves
up and into the recessed area of the
locking recess of the pocket. To
retrieve the latch, a pin is sheared by
upward force allowing the locking ring
mandrel to move up and out of the
way. The ring is then freed to
CN00942

disengage from the locking recess as

CN00656

1 in. BK-2 1 1/2 in. the valve and latch are removed
Latch RK Latch
Artificial Lift Products
 ®

RM and RA Latches for A-Profile

1 1/2-inch RM Latches are designed for installation in A-
type pocket profile mandrel. They have a set of spring-loaded
locking dogs designed to move up into a recessed area on
the latch core when run into the latch profile of the mandrel.
The valve is lowered into the pocket until the no-go shoulder
is reached. The spring force moves the locking lug ring
downward, forcing the dogs to move over and into the large
O.D. of the inner mandrel, thus locking the valve in place. To
retrieve the latch, a pin is sheared by upward force which
allows the inner mandrel to move up and out of the way. The
locking dogs are then free to return to the recess area as the
latch and valve are retrieved.
The locking mechanism for these latches is a spring-
CN00654

loaded rotating cam that is designed to lock in the pocket-

1 1/2 in. RM locking recess of the mandrel. They may be installed with a
Latch minimum of force. When retrieving, a pin is sheared, and the
latch-release pin lifted to allow the latch cam to rotate freely
out of the way.
Both latches are identical in function: Type RA contains
CN00653

two exterior o-ring seals and a shorter cam nose than the
RA Latch type R.

Artificial Lift Products

 ®

M and TG Latches for G-Profile

1 1/2-inch TG and 1-inch M Latches are
designed for installation in G type pocket
mandrels. A set of collet type locking dogs
are free to move up and into a recess in
the locking mandrel as the latch engages
the pocket profile. When an upward pull is
exerted on the latch, the full diameter of
the locking mandrel moves behind the
dogs which locks them in the set position.
CN00984

To retrieve the valve and latch, an upward

1 in.
1 in.
M M
Latch
Latch force is applied, which shears a pin. This
action moves the locking mandrel up,
which frees the dogs to retract as the
CN00982

valve and latch are pulled.

1 1/2 in. TG
Latch
Artificial Lift Products
 ®

A-Catch Profile
The A latch profile provides 360
degree of latch engagement. The 360
degree engagement design bending
of latches during installation and
retrieval. The no-go surface is above
the locking mechanism.
CN02679

Artificial Lift Products

 ®

G-Latch Profile
The G-Latch profile provides
180 degree of engagement. The
valve no-go is below the locking
Shoulder. G-Profile is utilized for
1-inch and 1 1/2-inch pockets.
CN02679

Artificial Lift Products

 ®

Otis HI STRENGTH TRU-GUIDE®®

Side Pocket Mandrel
Construction
Orienting Sleeve Deflector Valve Pocket Section

CN02660

Artificial Lift Products

 ®

Otis HI STRENGTH TRU-GUIDE®®

Valve Pocket Section

CN02659

Artificial Lift Products

 ®

Otis HI STRENGTH TRU-GUIDE®®

Orienting Sleeve

CN02657

Artificial Lift Products

 ®

Halliburton
Valve Pocket Section

CN02656

Artificial Lift Products

 ®

Halliburton Orienting Sleeve

CN02658

Artificial Lift Products

 ®

Positioning
Tool Pulling
Sequence
CN00630

Artificial Lift Products