Atlas Copco Powercrusher

PC 6

Jaw crusher
Capacity* – Up to 350 t/h (385 ust/h)
Features and technical information for PC 6
For further information, please contact your local Atlas Copco Customer Center.

The Atlas Copco Powercrusher jaw crushers have been

designed to operate in the most rugged environments -
and incorporate the unique “Quattro Movement”. This
“Quattro Movement” is made possible by an up-thrust
toggle plate position. This causes a figure 8 motion in the
moving jaw, which increases the feeding capacity and also
produces a post-crush at the crusher outlet. The double
deck independent grizzly section operates separately from
the hopper and offers excellent efficiency when screening
out fines prior to material entering the crushing chamber.
The unit can be equipped with a main conveyor mounted
screen box. Large GRP covers allow for ease of access
for service and maintenance. The PC 6 gives you:

• Less blockages Technical data

• More consistent wearing over the entire jaw faces Crusher box

of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise.
Legal Notice © Copyright 2010, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying
• High percentage of less flaky material Inlet opening 1 300 x 800 mm 51" x 31"
Gap width 70 - 135 mm 2.5" - 5"
• Higher capacity 1 500 mm
Jaw Flywheel 59"
• Excellent quality of end product due to the efficiency Crusher revolution, max. 270 rpm 270 rpm
of the fines removal
Feedhopper
• Ability of producing two sellable products by using Charging volume, approx. 9 m³ 11.8y 3
the screen box Charging length 4 120 mm 13' 6"

Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
Charging width 2 800 mm 9' 2"
Charging height (with walls) 4 200 mm 13' 9"
HS1 screenbox
Vibrating chute with pre-screening
can be mounted
Independent Length 4 677 mm 15' 4"
CAT C13 T4 / C11 T3 on main conveyor
double deck Lowerable
grizzly for
drive unit Width 1 162 mm 46"
main conveyor
superior screening belt 19 mm (¾") Main conveyor belt
out of fines Permanent
Large fly steel reinforced
magnetic rip stop belt
Belt width 1 200 mm 48"
wheels provide
unparalleled
separator Discharge height 3 323 mm 10' 10"
Hardox hopper.
Feeding with momentum
a loader is Side conveyor belt
possible Belt width 800 mm 31"
Discharge height 2 954 mm 9' 8"

Crawler unit
Track chain width 500 mm 20"

Permanent magnetic separator

Belt width 750 mm 29"
Hydraulically
*Capacity - Crusher production depends on gap settings,
adjustable
vibrating material, infeed size and feed rate.
hopper
Large GRP Fixed
covers and hydraulic
doors for easy tubes
Up-thrust toggle access
Hydraulically position Quick facts
9851 2756 01d 2011-09-05 Örebro, Sweden

foldable side (quattro

conveyor movement)
Unit type Jaw crusher
Sanpro Large distance Inlet opening 1 300 x 800 mm 51" x 31"
plates under between crusher
conveyor
Total weight 55 000 kg 121 250 lbs
outlet and conveyor
belt at outlet belt (required for Transport dimensions
to absorb recycling) 14 510 x 3 000 x 3 960 mm 47' 7" x 9' 10" x 12' 11"
impact
(L x W x H)
Crushing capacity Up to 350 t/h 385 ust/h
Engine power 287 kW 385 HP

www.atlascopco.com