VoiP-systems.

ru

User Manual for SMB32 Remote SIM

Card Controller

SMB32

Version: 1.0

2011-8-30

To protect the environment, please use electronic file to print

the pages you need.

 VoiP-systems.ru

Contents

1. Important notice
2. Unpacking list
3. Basic function introduction

4. Connection and installation

5. Leave-factory configuration table

6. Starting configuration

7. Precautions

8. Hardware and software characteristics

 VoiP-systems.ru

1. Important notice
1. This product and its accessories have realized the separation of

the SIM card and the SIM related device, which will make the

physical address of the identity represented by the SIM

unidentifiable. Please check carefully if the use of this product

is permitted by the local laws.

2. Because this product launches communication through

network, it cannot be fully guaranteed that the identity

information of the SIM can be completely transferred.

3. This product involves dynamic DNS (domain name – IP

address resolution). This dynamic DNS service is now provided

by Hong Kong DBLTEK for free. If you want to use this function,

please keep in mind that permanent fault-free operation of this

function cannot be ensured. If you want to establish an IP

address resolution server by yourself, please acquire the free

DDNS resolution server software from your supplier.

Your use of this series of products indicates that you have

read, understood and accepted this important

notice.
 VoiP-systems.ru

2. Unpacking list
Please check if the following products or accessories are available

when you receive the shipment.

12V 2A transformer Ч1

Host Ч1

CAT5 network cable Ч1

3. Basic function introduction

SMB32 is an integrated controller for 32-way remote SIM card.

It can convert the communication between the SIM card and

the SIM connecting device to realize the remote separation of

card and equipment.

 VoiP-systems.ru

SMB32 can control 32 SIM cards at the same time and offers

such functions as hot plugging, quick online SIM exchange and

timed exchange planning. The use of SMB32 and the

corresponding device can realize the comprehensive

management of the unattended devices and reduce the

workload for SIM operation, such as SIM card replacement and

account recharge.

In addition to the independent use, SMB32 can also be

registered on the SIM Server of DBLTEK to manage over

10000 SIM cards and the corresponding devices at the same

time. SMB32 can work normally in the harsh network

environment with the average packet loss rate <5% and the

maximum time delay of 300ms.

SMB32 supports the dynamic DNS service of DBLTEK.

Therefore, it can provide dynamic domain name resolution for

the user with dynamic IP and reduce their expenses for leasing

private line.

1. System architecture (independent SIM Bank)

 VoiP-systems.ru

As shown in the above figure, several GoIP devices (up to 32

ways) can be connected to the SMB32 through Internet. The

SIM cards installed with the devices are all integrated to the

SMB32 to be controlled and scheduled by the latter. (SIM Bank

mode: server mode)

2. System architecture (through SIM Server)

 VoiP-systems.ru

More than 10,000 SIM cards can be collectively scheduled and

managed via the SIM Server. The planned tasks are allocated

by the SIM Server (SIM Bank mode: client mode)

3. Exchange logic (independent SIM Bank)

 VoiP-systems.ru

The card numbers of the remote-end devices corresponding to the

cards on the “schedule mode = fixed mode” slots

 VoiP-systems.ru

When schedule mode is used (schedule mode = schedule),

devices of different zones will automatically exchange their SIM

cards when it is time for schedule, so as to realize the

automatic roaming of SIM cards. When this configuration is

used, chaos mode is adopted for the relationship between the

SIM cards and the remote-end devices.

4. Connection and installation

Connect the network cable linking the network to the LAN port,

and the configuration PC or other shared PC in the network to

the PC port. The LAN port can be connected to the ADSL

 VoiP-systems.ru

Modem, Switch or Ethernet private lines. The SMB32 supports

fixed IP and IP acquisition through DHCP and PPPoE.

LED:
LED Function Description
Power Power indicator It turns on when the
power is on
RUN Run status When it flashes at 4
indicator times per second, it
indicates that the device
has not been connected.
When it flashes at twice
per second, it indicates
normal operation.
LAN LAN port status Network connection
status of LAN port
When it flashes, it
indicates there is data
transfer.
PC PC port status Network connection
status of PC port
When it flashes, it
indicates there is data
transfer.
ERROR Error indication When it flashes, it
indicates device error.
Card status SIM card When there is SIM card
LED (32 LEDs) error, the red LED
flashes. When you press
the switch to replace the
SIM card, the red LED
will be on, indicating that
the replacement can be
conducted. When you
press the button for
confirmation after
replacement, the red
LED will be off.
 VoiP-systems.ru

Reset button: The reset button is used to restart the system

quickly.If you want to clear the system configuration, press and

hold the Reset button for 15 seconds, and all the configurations

will reset to the leave-factory settings.

5. Leave-factory configuration table

Item Leave-factory Configuration range
configuration
Login user name admin

Login password admin You can change the

password by yourself (all
the characters and digits
are permitted, no longer
than 16 characters)
LAN port status DHCP

PC port status 192.168.8.1 Only the IP of C section

can be configured
SIM Bank mode Local mode
Local port 56011 Less than 65533
Schedule mode schedule
Operation duration 600 minutes Less than 65533

6. Starting configuration

1) Logging on SMB32

Method 1: Set the IP of the PC connecting to the PC port as

192.168.8.x (x=2-254). Type 192.168.8.1 into the browser

address card, and the following login box will appear.

 VoiP-systems.ru

Enter the user name and password to log on the configuration

interface (the initial user name and password are both “admin”).

* If you change the setting, remember to press “save the

change” to save the configuration.

2) Setting network:

Network setting is important for ensuring the normal and stable

operation of SMB32. The best environment for network

connection is the private line with static IP, second to which is

the dynamic public IP (e.g., ADSL, broadcast and television

network). The intranet IP under the shared router is relatively

unstable. If the intranet shared line must be used, it is strongly

 VoiP-systems.ru

recommended to set the router as DMZ to the IP used by

SMB32.

You need to check and confirm the network status when setting

the network. You are suggested to use the fixed IP.To select the

fixed IP, select “fixed IP” from the LAN port drop-down menu of

the network setting interface, and correctly fill in the network

setting fields according to the IP, subnet mask, default routing

(gateway) and DNS server provided by the network

administrator,as shown in the following figure:

When you use the lines in need of dial-up, such as ADSL,

configure the LAN port as PPPoE, and then fill in the user name

and password correspondingly, as shown in the following figure:

 VoiP-systems.ru

3) Setting DDNS:

When the dynamic IP is used and the exchange is conducted

independent of the server, you can use the DDNS service. The

DDNS service is the dynamic IP address resolution service

provided by DBLTEK for free. When this function is used, any

SMB32 device can use the IMEI number as the domain name

and acquire the callee’s IP through the DNNS server (both

parties use DDNS). The setting method is as shown in the

following figure. First, select the DDNS, and then fill in the

relevant fields according to the address of the current service

provider: DDNS server address: voipddns.com, port: 39980,

update time: 120 (second), and the IMEI number of the device

(refer to the SN on the barcode strip at the bottom of the

device).

When DDNS is used, the connected address will be

www.IMEInumber.com.
 VoiP-systems.ru

4) Setting operation mode:

SMB32 has two operation modes: server mode and client

mode. Under server mode, the SMB32 works as the server of

the remote-end device, which logs on the SMB32 to realize the

SIM connection. Under client mode, the SMB32 logs on the

SIM server, and all the SIM connections are scheduled and

managed by the server.

Server mode:

Select server mode from the SIM Bank mode drop-down

menu, and set the local port, which will be used as the login

port of the remote-end device. Under the server mode, the

 VoiP-systems.ru

best working environment of the SMB32 is to use the fixed

public network IP. If the intranet IP is used, the router DMZ

shall be set, or it shall be forwarded by the port (forward

from the local port to the external network), and the DDNS

service shall be adopted. When several SMB32 devices

are used for an IP, different devices use different ports.

Schedule mode:

The schedule mode determines whether the SMB32 will

conduct automatic schedule on the SIM card and

remote-end device to realize automatic roaming.

When the fixed mode is used, select the “fixed” mode, and

fill in the unit code (i.e., the login user name, only English

letters can be filled in), zone code (only Arabic digits can be

filled in) and login password of the remote-end device.

Select the number of lines of the device. During the

operation, the remote-end device will automatically acquire

the information of the SIM cards on the corresponding slots

according to the relevant orders and number of lines on the

SMB 32.

To use the schedule mode, select the “schedule mode”,

and the remote-end device will obtain the information of the

corresponding number of SIM cards according to the

 VoiP-systems.ru

number of lines randomly, and replace the SIM cards of

other zones in use automatically according to the relevant

“operation duration”. It will stop operation before the

replacement, and the stop time length is the “sleep time”. 1-

8 operation zones can be set. When several devices are in

the same physical zone, they can share the same zone

code. The number of lines shall be kept identical for

different zones to prevent long-time hang-up or unbalanced

distribution.

7. Precautions
 VoiP-systems.ru

1) SIM card replacement

When replacing the SIM card in live condition, press the

button under the slot. When the red LED is on, it indicates

that the replacement can be conducted (when the red LED

is on, the SIM will be disconnected, no matter the card is in

use or not). After the replacement, press the button again,

the SIM card will automatically connect the corresponding

remote-end device.

2) SIM card direction

The SIM card socket is the suppressing type socket. When

you press it, the SIM card will be ejected out; press it again,

it will be locked. The insertion direction of the SIM card is

as shown in the above figure, with the contact points

pointing forward, and the notch facing downward.

Otherwise it cannot be inserted.

3) Dust-proof

Because the opening of the SIM card slot is facing upward,

please remember to replace the dust-proof cover after the

SIM card replacement to prevent the entry of the dust into

the slot, which will affect the use life of the device.

4) Water-proof
 VoiP-systems.ru

Because the SIM card slot is facing upward and in open

state, be sure to prevent the spray of liquid onto the

SMB32.

5) Software upgrade

To upgrade software, please contact your supplier to obtain

the latest software upgrade connection, enter the

connection into the upgrade address field of the SMB32,

and then press the “start” button. Please note that the

power supply cannot be disconnected during the upgrade.

8. Hardware and software characteristics

1. Mechanical characteristics and operating

environments

Outline dimensions: 285Ч142Ч42mm

Host net weight: 680g

Storage environment temperature: -40℃ - 80℃

Operating environment temperature: 0℃-40℃

 VoiP-systems.ru

Operating environment humidity: <90%, no condensing

Maximum power consumption: 10 W

2. Network port parameters Number of

network ports: 2

Network standard: 10/100Base-T

Execution standard: IEEE802.1p

IP standard: IPV4

4. System Parameters
Item Description Remarks
Operating system Linux Version: 2.6
SIM card standard GSM11.11 3.3V
Network protocol IP, TCP, UDP, HTTP, ICMP, DHCP CL & SRV, NTP,
TFTP, ToS, telnet
Worst network Packet loss rate <5%, network time delay <300ms
environment
One-way SIM peak 11KBPS
traffic
Configuration page Html XML2.0 JAVA