DF-TV7-T
Multi-spectrum IR Flame Detector
Presentation
The MultiFlame DF-TV7–T is a multi-spectrum infrared flame
detector using three wavelengths. The MultiFlame DF-TV7-T
responds to hydrocarbon fires and is the right choice for operation
in dirty environments or for detection of smoky fires.
The MultiFlame DF-TV7–T is designed to respond to unwanted
hydrocarbon fires, whilst maintaining a high degree of false alarm
immunity.
The device offers a wide range of output options, as standard and
is certified for use in SIL 3 applications. The unit may be interfaced
directly with a wide range of fire panels, controllers and PLC’s etc.
The unit is fully configurable using a wireless hand-held terminal
(TLU600) or optionally via HART (TM) giving true flexibility to the
installer. Time delays, sensitivity and output configuration are all
set up via the TLU; a hazardous area approved hand-held unit.
Wireless testing of the optical and output circuits are also possible
using the TLU for a guaranteed ease of maintenance.
Terminal TLU portátil Features
sem fio (IV)
• Continuous auto-check of optical lens
• Relays, 4-20mA, 0-22mA, Hart outputs
• Long range up to 80m, 260 ft deep
• Wide field of view 120°
DF-TV7-T
Multi-spectrum IR Flame Detector
Technical data
General
Technology Technology Multi-spectrum Infrared, 3IR
Fire Types Hydrocarbon fires
Range, n-heptane 80m (260ft) 0.3x0.3m (1 sq ft)
Range, gasoline 65m (21 0ft) 0.3x0.3m (1 sq ft)
Maximum horizontal angle 1 20°
Field of view Horizontal angle @ 50% 1 04°
Vertical angle @ 50% 82°
Response time adjustable from 3 to 20 seconds (typical 6s. )
Warranty 3 years, back to factory
Output signal
4-20mA or 0-22mA (configurable by the
user)
Standard max. load impedance 700M (Std. )
HART Protocol 7th edition (option)
Lonworks for Syntel (option)
Alarms 2 x configurable Relays max 1 A / 30Vcc
Visual Normal Operating, alarm, fault
Electrical
Power supply 24 Vdc, range (18 - 28 Vdc)
Power consumption 2W normal; 4W during test
0.3 mm2 (22 AWG) - 1 .5 mm2 (1 6 AWG)
Connection
Shielded cable recommended
Environmental
Storage: -40°C to +70°C (-40°F to 158°F)
Operation -40°C to +65°C (-40°F to 149°F)
Option Sunshade, max. temp. 85°C (185°F)
Humidity 99% RH (non-condensing)
Ingress IP66
RFI /EMI Complies with EN50130-4
Explosion proof housing
TLU600 316 L STAINLESS STEEL
Weight 5KG (10 LBS) Accessories
246.8 x 140.4 x 1 1 5 mm (L, H, W)
Dimensions
9.8 x 5.5 x 4.5 inches TLU600 Infrared remote control unit, ATEX certified : II 1 G Ex ia IIC T4
LT15 Test lamp, ATEX certified : II 2 G Ex d IIC T6-T5
AS048-X SS316 swivel bracket (with 2” or 2.5” pipe mounting)
Approvals AS056-450 Sun shade
AS040 Long type visor (vertical upper angle reduction)
SIL SIL3 without redundancy according to IEC 61508-1 to 7
ATEX II 2 G Ex d IIC T6 Gb (de -40°C à +65°C) AS041 Long type visor (horizontal and vertical angle reduction)
IECEx IEC 60079-0 / IEC 60079-1 AS045 Air shield
CE DPC According to EN 54-10:2002 + A1:200 AS215 Tag plate
Our company’s quality improvement programs require continuous evaluation and improvement of all products. Therefore, the information contained in this brochure is subject to change without notice and does not constitute a technical
description of the product. For more information, please contact TELEDYNE OLDHAM SIMTRONICS or your company representative.
AMERICAS EMEA ASIA PACIFIC
4055 Technology Forest Blvd. ZI Est, Rue Orfila, Room 2722, No. 51 Jinzang Road,
The Woodlands,TX 77381 CS 20417 Shanghai Free Trade Zone
USA 62027 ARRAS Cedex, France People's Republic of China
Tel.: +1-713-559-9200 Tel.: +33-3-21-60-80-80 Tel.: + 86-134 8229 505
Copyright © 2020 Teledyne Technologies. GF-30080G-EN . All rights reserved.
[email protected] www.teledynegasandflamedetection.com
