Scribd
Upload
9 views

Mse MCQ

Uploaded by

jagdishmore911
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

Mse MCQ

Uploaded by

jagdishmore911
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Multiple choice questions (one marks each)

1. HVDC Homo polar links uses


a. One conductor usually of negative polarity
b. One conductor usually of positive polarity
c. Two conductors of positive and negative polarity
d. Two conductors of negative polarity
2. HVDC transmission lines are more economical for
a. Short distance transmission
b. Interconnected systems
c. Long distance transmission
d. Any distance transmission
3. Which of the following is Multi terminal HVDC system?
A. Monopolar
B. Bipolar
C. Homopolar
D. Both (A) and (B)
4. Which of the following is not part of HVDC system
A. Filter B.Smoothing reactor C.Convertor transformer D.None of the above
5. The voltage between two poles in the bipolar HVDC system is ______ times to that of the pole to earth
voltage.
a. √ 3
b. 2
c. 3
d. √ 2
6. The rating of monopolar HVDC system is ______ to that of bipolar HVDC system.
A. 1 / 2 B. √ 2 C.√ 3 D.2
7.. The scope of application of DC transmission is limited by
1. High cost of conversion equipment.
2. Asynchronous operation possible
3. Generation of harmonics.
4. No charging current
5. Complexity of controls.
a. Only 1 is correct
b. Only 1,3&5 are correct
c. Only 1,2& 4 are correct
d. Only 1,3& 4 are correct
8. HVAC transmission lines are __________ as compared to HVDC lines.
e. difficult to erect
f. more expensive for long distances
g. more expensive for short distances
h. less expensive for short distances

9. The power carrying ability of____________ lines is unaffected by the distance of transmission.
a. DC
b. AC
c. Both AC & DC
d. None of the above
10. In which type of HVDC system, two poles are of same polarity & earth as return path?
a. Monopolar
b. Bipolar
c. Homopolar
d. None of the above

11. Which of the following is not part of HVDC system?


a. Filter
b. Smoothing reactor
c. Convertor transformer
d. None of the above
12. Two six pulse converters used for bipolar HVDC transmission system, are rated at 1000MW, + 200 kV.
What is the dc transmission voltage?
a. 200 kV
b. 400 kV
c. 500 KV
a. 100 kV
13. What are the factors to be considered for planning HVDC Transmission?
a. Cost
b. Technical performance
c. Reliability
d. All of the above
14. The function of the converter in the HVDC line is to convert
a. AC into DC
b. DC into AC
c. Either of the above
d. None of the above
15. It consists of two statements, one labelled as the ‘Statement (I)’ and the other as ‘Statement (II)’. You
are to examine these two statements carefully and select the answer using the codes given below:
Statement (I): No compensation is needed in HVDC lines, unlike EHV-AC system where series and/or
shunt compensation is required.
Statement (II): Charging current is absent in HVDC system.
a. Both Statement (I) and Statement (II) are individually true and Statement (II) is the correct
explanation of Statement (I)
b. Both Statement (I) and Statement (II) are individually true but Statement (II) is NOT the correct
explanation of Statement (I)
c. Statement (I) is false but Statement (II) is true
d. Statement (I) is true but Statement (II) is false

16. Two six pulse converters used for bipolar HVDC transmission system, are rated at 1000MW, + 200 kV.
Find the rms current rating required for the SCRs.
a. 2500 A
b. 1350 A
c. 1445 A
d. none of the mentioned

You might also like