LAPORAN DESAIN PROYEK

TENTANG
“OPTICAL CONVERTER”
Disusun Untuk Memenuhi Tugas Mata Kuliah Desain Proyek
Semester 6

Dosen Pengampu :
Ir. Martono Dwi A., MMT
Disusun Oleh :
Kelompok 3
Bylliano Helmiananda 2141160088 / 03

JURUSAN TEKNIK ELEKTRO

PROGRAM STUDI JARINGAN TELEKOMUNIKASI DIGITAL
POLITEKNIK NEGERI MALANG
2024

A. Identitas Praktikum
1 Judul Desain Proyek : Optical Converter
 2 Tim Praktikum : 3

No Nama NIM Kelas/Kelompok

1 Bylliano Helmiananda 2141160088 3C/03
2 M.Fauzan Ardika Akbar 2141160068 3C/15
3 Tiya Diyah Angesti 2141160030 3C/

3. Obyek Praktek : Converter 100 base dan 1000 base (total 18 perangkat)
4. Masa Pelaksana : 12 Februari 2024 s.d 18 April 2024
5. Biaya : Rp.
6. Lokasi Praktikum : Gedung AI Politeknik Negeri Malang
7. Temuan Yang ditargetkan : Mengukur output dari sumber yang dihubungkan
menggunakan converter 100 dan 1000 base dengan
server open test

Isi Laporan :
B. Ringkasan
Desain proyek ini dibuat menggunakan perangkat sebanyak 18 converter yang
bertujuan untuk membuat sebuah jaringan lokal. Aspek-aspek yang ada dalam pembuatan
desain proyek ini meliputi kemampuan merancang suatu jaringan lokal sesuai kebutuhan
di suatu lokasi yang ditentukan. Dari desain proyek yang menggunakan 18 converter,
diperoleh bahwa hanya 14 converter saja yang digunakan dan menyisakan 4 converter
yaitu 2 pasang converter 1F1E 1000 base.
C. Pendahuluan Studi Kelayakan
Seiring berkembangnya teknologi, Telekomunikasi semakin berkembang
dengan banyaknya kemunculan teknologi di bidang telekomunikasi yang terus baru. Hal
ini menuntut kegiatan komunikasi jarak jauh dapat dilakukan secara cepat, efisien, dan
praktis. Layanan telekomunikasi tentu akan semakin baik dari segi kualitas maupun
kuantitas. Komunikasi antar komputer juga menjadi salah satu telekomunikasi yang ikut
berkembang. Komunikasi ini membutuhkan jaringan komputer yang terhubung satu sama
lain dan memiliki kemampuan untuk bertukar data dan berbagai sumber daya. Dalam
berkomunikasi, komputer membutuhkan protokol komunikasi yaitu sistem aturan yang
digunakan oleh perangkat dalam suatu jaringan agar dapat mengirimkan informasi atau
data baik wired atau wireless. Dalam percobaan kali ini, membuat desain sebuah jaringan
komputer lokal yang menggunakan converter serat optik dengan tujuan untuk
meningkatkan efisiensi dan keandalan jaringan dalam melakukan transmisi data.
D. Metode Kajian
Fiber Optic Detial 3F3E
 Product Optical Optical Sensibility Transmission distance
model wavelengt power (dbm)
h (nm) (dbm)
MC-SC MM 850 0 – (-8) < -24 62.5 μ m:220 meter 50 μ m:550 meter
MC-SC SM 1310 0 – (-8) < -24 20Km
MC-SC SM 1310 0 – (-8) < -25 40Km
MC-SC SM 1550 0 – (-6) < -30 80Km

1310 nm FX1(A) = -18,46 dBm

= 14,24 µW
PmW = 10^(PdBm/10)
= 10^((-18,46)/10) = 0,0142 mW
P µW = 10^(-14,24) x 1000
= 5,754 µW
1310 nm FX2(A) = -14,87 dBm
= 32,52 µW
PmW = 10^(PdBm/10)
= 10^((-14,87)/10) = 0,0325 mW
P µW = 10^(-32,52) x 1000
= 3,019 µW
1550 nm FX3(B) = -5,501 dBm
= 281,7 µW
PmW = 10^(PdBm/10)
 = 10^((-5,501)/10) = 0,2817 mW
P µW = 10^(-281,7) x 1000
= 2,995 µW
Perhitungan Link Budget
1310 nm FX1(A) = Optical Power (dBm) – Sensibility (dBm)
= -18,46 dBm – (-24 dBm)
= -5,54 dB
1310 nm FX2(A) = Optical Power (dBm) – Sensibility (dBm)
= -14,87 dBm – (-25 dBm)
= -10,13 dB
1550 nm FX3(B) = Optical Power (dBm) – Sensibility (dBm)
= -5,501 dBm – (-30 dBm)
= 24,499 dB
D.1 Aspek Kebutuhan Pengguna
 Desain Awal

 Desain Modifikasi
  Desain Converter Modifikasi

D.2 Aspek Teknis

A. 3 Fiber Optic 3 Ethernet 100 base
 Brief Introduction
Many thanks for purchasing Gigabit optical converter! This product supports
IEEE802.3Z/AB 1000Base-SX/LX protocol, the working mode of duplex full
mode and half mode. The electric outlet is adaptive to the rate of 10/100/1000M
Gigabit optical converter. This manual is for various models of adaptive 10Base-T,
 100Base-T, 1000Base-T optical converters. The following purchasing guide is for
customer to refer to.
Purchasing guide for Gigabit optical converters
Model Specifications
MC- 10/100/1000M multi-mode 500 meter
SC/LC
MM
MC- 10/100/1000M single mode 0-80 Km
SC/LC
SM
MC- 10/100/1000M single mode 0-80 Km
SC/LC
SM

 Packing list
Please check the following items in the package before the installation of
converter.
Gigabit optical converter 1 piece
Power line (build-in) 1 piece
Warranty card 1 piece
User manual 1 copy
Please contact the dealer immediately for any loss or damage to the above items.
 Installation
1. Interface
RJ-45 interface
The transmisiion media adopts CAT5 and CAT6 twisted-pair. It is recommended
to use quality RJ-45 and well made jumper. It features the function of
automatically identifying the trough line and cross wire.
Fiber interface
The SC fiber interface is of duplex mode type, including two interfaces, namely
TX and RX. When the two sets of optical converter are interfaced or connected to
swirchboard with fiber interface, the fiber is in cross connection, namely “TX-
RX” “RX-TX”.
2. Connection
Connect the network device (work station, hub or switch) to the RJ-45 jack of the
optical converter through twisted-pair CAT5. Connect the multimode/singlemode
fiber to SC/ST/LC fiber interface of te optical transceiver. Turn the power on. The
corresponding LED is on for a correct connection. (See the table below for the
LED indicator lamp)
 Figure 1 Schematic drawing of connection
 Explanation for LED indicator lamp
The LED indicator lamps serve as device monitoring and error display. The
following explains each LED indicator.
LED Status Explanation
FXPSD On Rate of fiber interface is
1000Mbps
FXLINK/ Blink Active status display of fiber
ACT interface link
“Blink” indicates packet goes
through FX
TPSPD On Rate of electrical interface is
1000Mbps
Blink Rate of electrical interface is
100Mbps
Off Rate of electrical interface is
10Mbps
TPLINK/ACT Blink Active status display of ectrical
interface link
“Blink” indicates packet goes
through TP
PWR On Power is on and normal.

 Fiber transmission features :

Pr Opti O Sens Transmission
od cal pt ibilit distance
uc wave ic y
 t lengt al (db
m h p m)
od (nm) o
el w
er
(d
b
m
)
M 850 0 <- 62.5 μ m:220 meter 50 μ m:5
C- – 24
S (-
C 8)
M
M
M 1310 0 <- 20Km
C- – 24
S (-
C 8)
S
M
M 1310 0 <- 40Km
C- – 25
S (-
C 8)
S
M
M 1550 0 <- 80Km
C- – 30
S (-
C 6)
S
M

 Technical parameters :
1. Standard Protocol :
IEEE802.3Z/AB 1000Base-T/SX/LX
2. Transfer rate :
Electrical interface: 10/100/1000Mbps Fiber interface: 1.25Gbps
3. Interface :
one UTP RJ-45 interface
One SC interface
4. Operation mode :
 full duplex mode or half duplex mode
5. Power supply parameter :
Build in: 110-265V AC
6. Enciromental temperature : 0 ° C−60℃
7. Relative humidity : 5 %−90 %
8. TP cable : 5E, CAT 6
9. Transfer fiber :
multi-mode : 50/125 , 62.5/12 μm
single-mode : 8.3 /125 , 8.7 /125 ,9 /125 ,∨10/125 μm
10. Dimensions :
Build-in power supply 32mm x 130mm x 170mm

 Cautions :
1. This product is suitable for indoor application.
2. Put on the dust cover of fiber interface when not used.
3. It is forbidden to stare at the TX fiber-transfer end woth naked eyes.
4. Single optical fiber transceiver must be used in pair.

 Trouble shooting :
1. Line loss is excessive during the fiber wiring Excessive loss in adaptor connector
plug-in and fiber soldering welding and excessive intermediate nodes may cause
excessive loss rate or abnormal operation.
2. If power loss is excessive in the fiber, please check and clean the fiber patch cord
connectors.
Analisa
 Link Optical Optica Sensibility Transm
Budge wavelength l (dbm) distan
t (nm) power
(dbm)
-2,96 1310 -18,46 < -24 20Km
(FX1)
-0,76 1310 -14,87 < -25 40Km
(FX2)
13,77 1550 -5,501 < -30 80Km
(FX3)

B. 1 Fiber Optic 1 Ethernet

NetLink
HTB-1100
HTB-1100-2.5 KM
MTB-1100S-25KM
HTB3100A/B
HTB-1100S-ST
HTB-1100-ST
HTB-1100S-FC
HTB-GS-02
HTB-GM-02
HTB-GS-03
HTB-GM-03
HTB-4100A/B
Fast Ethernet
Converter
Gigabit
Ethernet
Converter
User’s Guide
V2.0
 Copyright Statement

This publication may not be reproduced as a whole or in part, in any way what so ever unless
prior consent has been obtained G.T Technology Co.,Ltd.

FCC Warning

The HTB-il 100/il 100S have been tested and found to comply with the limits foe a Class A
digital device, pursuant to Part 15 of the FCC Rules. These standarts are designed to provide
reason nable protection a gainst harmful interference when these devices are operated in a
commercial environment. These devices can use, generate and radiate radio frequency energy
and may cause harmful interface to radio communications unless. Installed in accordance
with this User’s Guide. Operation of this device in a residential area is likely to cause harmful
interface which will make the user responsible for the appropriate remedial action at his/her
own expense.

CE Mark Warning

These are Class A products. In a domestic environment these products may cause radio
interface in which case the user will need to consider adequate preventative measures.

1. Checklist
Your HTB-il 100/il 100S carton should contain the following items:
 HTB-il 100/il 100S Converter
 AC Power Cable
 This User’s Guide
2. Overview
The 10/100Base-TX to 100Base-FX Fast Ethernet Converter is fully compliant with
all IEEE802.3u standarts.
 HTB-il 100: SC\ST Fiber Connector
(Multi-mode)

 HTB-il 100S: SC Fiber Connector

(Single-mode)
Six LEDs display instant status monitoring for Power,Fdx/Col,FX(Link/Act),
Tx(Link/Act), Fx 100.Tx 100.

3. Installation
Please follow the procedure outlined below:
 Turn off the power of the device/station in the network in which the HTB-il
100/il 100S will be installed.
 Ensure that there is no activity in the network.
 Attach fiber cable fiom the HTB-il 100/il 100S to the fiber network. The fiber
connections must be matchedtrans mit socket to receive socket.
 Attach a UTP cable from the 100 Base-Tx network to the RJ-45 port on the
HTB-il 100/il 100S.
 Connect the power cord to the HTB-il 100/il 100s and check that the Power
LED lights up. The TP Link and FX Link LEDs will when all the cable
connections are satisfactory.
 Turn on the power of the device/station.

Fig.1 HBT-il100/il100S Converter Front&Side

Fig.2 Basic Network Connection

 Note:
a. Wiring pin-outs for connection of the TX port:
 To a Hub or Rep cater (MPR): 1 to 3,2 to 6,3 to 1,6 to 2 (Crossover
Cable)
 To a Workstation (DTE) : 1,2. 3,6,to 1,2,3, 6 (Straight-through Cable)
b. The full or half duplex mode must be selected for both the converter
AND the linked unit.

4. LED Description

LED Colour Function

FX100 Green Lit when 100Base-FX operation.
Lit when fiber cable connection with remote
FX Link /
Green device is good. Blinks when any FX traffic is
ACT
present.
Power Green Lit when + 5V Power is available.
Lit when Full Duplex Mode is enabled.
FDX/Col Green
Blinking when collision is present.
TX 100 Green Lit when 100Base-TX operation.
Lit when TP cable connection with remote
TX Link /
Green device is good. Blinks when any TX traffic is
ACT
present.

5. Technical Specifications
The Converter conforms to the following standards:
Standards: IEEE 802.3u Fast Ethernet
10/100Base-TX and 100 Base-FX
Connectors (RJ45-UTP and Fiber SC or ST)
 HTB-il100 : RJ-45 and SC/ST Connector
(Multi-mode)

 HTB-il100S : RJ-45 and SC/Connector

(Single-mode)

LED: POWER. FDX/Col. FX Link/Act, TX Link/Act, Fx 100, TX 100.

 Data Transfer Mode: 10/100Mbps

Duplex Mode: Full or Half Duplex Mode

Power Reqnirement: AC 100-260v

DC 1A@-5V

Ambient Temperature: 0°C to 70°C

Humidity: 5% to 90%

Dimensions: 40x110x140mm (H x W x D)

Cable:

UTP: Cat.5 UTPcable

Fiber: Multimode: 50/1 25, 62,5/125, or 100/140um

Singlemode: 8.3/125, 8.7/125, 9/125, or 10/125um

6. Fiber Optic Information Fiber Optic Detail:

HTB-i1100 HTB-i1100-25
Connector Type SC/ST SC
Fiber Type Multi-mode Single-mode
Wavelength 850/1310nm 1310nm
Typical Distance 2Km 25Km
Min TX PWR -19.0 dBm -17.0 dBm
Max TX PWR -14.0 dBm -8.0 dBm
Sensitivity -31.0 dBm -31.0 dBm
Link Budget 12.0 dBm 14.0 dBm

HTB-i1100S-40 HTB-i1100-60
Connector Type SC SC
Fiber Type Single-mode Single-mode
Wavelength 1310nm 1310nm
Typical Distance 40Km 60Km
Min TX PWR -9.0 dBm -5.0 dBm
 Max TX PWR -3.0 dBm 0 dBm
Sensitivity -31.0 dBm -35.0 dBm
Link Budget 22.0 dBm 30.0 dBm

Fiber Optic Detail 1F1E:

1000
Connector Type SC SC
Fiber Type Single-mode Single-mode
Wavelength 1310nm 1310nm
Typical Distance 60km 60km
Min TX PWR -01,52 dBm -01,91 dBm
Max TX PWR -05,38 dBm -04,13 dBm
Sensitivity -31,0 dBm -31,0 dBm
 Link Budget 29,48 dBm 29,09 dBm

C. 6 Fiber Optic 2 Ethernet

 Brief introduction
Many thanks for purchasing Fast Ethernet optical transceiver! This product supports
IEEE802.3Ul100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. This manual is for
100M transceivers. The following purchasing guide is for customer's reference.
Purchasing guide for optical transceivers

Model Specifications
UTP-MM 10/100M adaptive, single mode 2km, ST
UTP-SM 10/100M adaptive, single mode 25km, SC
UTP-SM 10/100M adaptive, single mode 40km, SC
UTP-SM 10/100M adaptive, single mode 60km, SC
UTP-SM 10/100M adaptive, single mode 100km, SC

 Packing list
Please check the following items in the package before installing the transceiver.
Fast Ethernet optical transceiver 1set
AC/DC adapter (external) 1pcs
User manual 1copy
Please contact the dealer immediately for any loss or damage to the above items.

1. Interface RJ-45 interface

The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the
function of automatically identifying the through line and cross wire
Fiber interface.
SC/ST fiber interface is of duplex mode type,including two interfaces, namely TX and RX. When the
two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in
cross connection, namely "TX-Rx", "RX-TX" (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of
optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber
interface of the optical transceiver. Then switch on. The corresponding LED is on for correct
connection. (See the table below for the LED indicator lamp)
Explanation for LED indicator lamp LED indicator lamps serve as device monitoring and trouble
display. The following is the explanation for each LED indicator lamp.
LED
indicator Status Explanation
lamp
On Connection status display for fiber link.
FX “ON” indicates that fiber link is in correct connection
Link/Act Blink Active status display of fiber link
“Blink” indicates packet goes through Fx end
On Connection status display for Electric link.
TX “ON” indicates that Electric link is in correct connection
Link/Act Blink Active status display of fiber link
“Blink” indicates packet goes through Tx end
On Transceiver works in the full duples mode
FDX
Off Transceiver works in the half duples mode
PWR On Power is on and normal
FX100 On Transfer rate of optical interface is 100Mbps
On Transfer rate of electric interface is 100Mbps
TX100
OFF Rate of electric interface is 10Mbps

Transmission characteristic of single fiber transceiver

Product Model Optical Transmitting Receiving Transmission

(WDM) wavelength Optical Power sensitivity Distance
(nm) (dbm) (dbm) (km)
UTP-SM 1310/1550 -12-6 -12 25
(25KM) 1550/1310
UTP-SM 1310/1550 -3-5 <-31 40
(40KM) 1550/1310
UTP-SM 1310/1550 -5-9 <-44 60
(60KM) 1550/1310

 Fiber transmission features

 Product Model Optimal Optical Sensibility Saturability
(WMDM) Wavelenght Power (dbm) (dbm)
(nm) (dbm)
UTP-MM 1310 -19 ~ -14 -31 -12
UTP-SM 25 1310 -14 ~ -7 -34 -3
UTP-SM 40 1310 -9 ~ -7 -38 -3
UTP-SM 60 1310 -5 ~ -0 -38 -3
UTP-SM 100 1550DFB -5 ~ -0 -38 -3

 Main features
1.In conformity to IEEE 802.3 10 Base T standard. In conformity to IEEE 802.3u 100 Base-TX/FX
standard.
2.Max.2M buffer memory built in chip.
3. Back pressure Now control for full duples IEEE802.3 X and half duplex.
4. Automatic identification of MI/MDI X cross line.
5. High-performancel4Gbps memory bandwidth
6. In conformity to safety code of FCC and 15 CLASS A and CE MARK.

 Techmical parameters:
1. Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100 Base-TX/FX standard.
2. Connector:one UTPRJ-45 commector,one SC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply paramerer: outside: 5 V DC 2A built-in: 110-265V AC 48VDC
5. Environmental temperatuer:0°C-60°C
6.Relative humidity: 5%~90%
7. TP cable: Cat5 UTP cable
8. Transfer fiber: multi-mode: 50/125,62.5/125 or 100/140 p. m single mode:8.3/125,8.7/125,9/125 or
10/125 um
9. Dimensions:
external power supply:26mm x 71mm × 94mm
Built-in power supply: 40mm × 11Umm x 140mm

 Cautions.
1. This product is suitable for indoor application.
2. Put on the dust cover of fiber interface when not used
3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.
4. Single optical fiber transceiver must be used in pair (See the
attachment description in delivery).

 Trouble shooting:
1. Device is not matched. Please select the corresponding network
device according to the transfer rate of the product (10Mbps or 100Mbps) when connected to other
network devices (network card. hub,switch).
2. Line loss is excessive during the fiber wiring Excessive loss in connector plug-in and fiber
soldering welding and excessive intermediate nodes may cause excessive loss rate or abnormal
operation.

 DIP SWITCH
*Toggle ON pin 1 to LFP is enable; OFF is disable
*Toggle ON pin 2 to Store and forward switch is enable OFF pin 2 to Modified cut-through switch
mode is enable
*Toggle ON pin 3 to auto-negotiation mode is enable OFF pin 3 to forec the TX port work
10/100Mbps,full/half duplex
*Toggle ON pin 4 to TX is work 10Mbps, OFF is 100Mbps
*Toggle ON pin 5 to TX is work half, duplex OFF is full duplex
*Pin 6 is NC

Koneksi Port Serat Optik

Gambar cara koneksi konverter media serat dupleks SC-SC.

"Tx" adalah port transmisi modul fiber, sedangkan RX" adalah port penerima modul fiber.
"A"
port transmisi konverter media serat (TX) harus dihubungkan dengan port penerima
konverter media serat "B" (RX), pada saat yang sama, port penerima konverter media serat
"A" (RX) harus dihubungkan dengan port penerima konverter media serat "B" port transmisi
(TX)

Gambar cara koneksi konverter media serat SC-SC Simplex. Port terminal serat konverter
media serat harus dihubungkan dengan port terminal serat konverter media serat "B".

Lambda yang digunakan dari port A ke  port B menggunakan 1310 ,

Dan port B ke  port A menggunakan lambda 1550
 - Fiber Port: 6 Port SC (3A-3B)
- Fiber Interface: Single
- Ethernet: 2 Port 10/100 Base-TX
- Power IN: DC 5V 2A
- Transmission distance: 25KM

Port Fiber SC A2 Port Fiber SC B1 Port Fiber SC B3

Port Fiber SC A1 Port Fiber SC A3 Port Fiber SC B2

- 6 Port Kabel FO

1. 2 Port Lan Rj45  Untuk menghubungkan kabel ethernet/LAN

2. LED indikator Power/FO/Lan  Sebagai indikator saat menyambungkan switch
A ke switch B untuk mengetahui apakah sudah tersambung atau belum
Port Kabel Power DC/5V  Sebagai port catu daya pada switch dengan aliran listrik
DC sebesar 5V

D. 2 Fiber Optic 4 Ethernet

 HS Air PO
High Strong High Connect
HD NETWORK OPTICAL
Fiber Transceiver
10/100BASE-TX TO 100BASE -FX
10/100/1000BASE-TX TO 1000BASE-FX

User Manual
 HS-CM 200
 HS-CM 1000
Copyright by HSAIRPO All rights reserved.Website www.hsairpo.com
www.hsairpo.co.id
Information in this Documents is subject to change without prior notice
Introduction
Optical transceiver used in double wire and cable data communications between, suitable for
intelligent village or to the desktop optical fiber connectors. Automatically ADAPTS to 10
Mbps, 100 Mbps, 1000 Mbps transmission rate. The convenlent user upgrades. it will
network transmission distance from the twisted pair of the limit of the 100m expanded to
100km above, can easily achieve motherboard server, Repeators, hubs, terminal and terminal
of the interconnection connection.
Features
 Support optional path failure monitoring function, report switch network management
 Support hot swaps
 Support IEEE802.1Q
 Support SPANNING TREE structure fault-tolerant network
 Automatic full-duplex and half-duplex conversion
 Active adopted four layers circuit structure, stable work, smooth data transmission,
the anti-interference ability
 With the German Slemens surface weiding assembly lines processing
 Average trouble-free more than 50000 hours, accord with standard telecommunication
level operation
Specifications
Technical Specifications
100BaseFX 1000BaseFX
Band Width IEEE802.3.802.3u.802.3x
RJ 45 Port 10/100 BaseT(X) 10/100/1000 BaseT(X)
Wave 850nm/1310nm/1550nm
Length
Fiber Port 100BaseFX 1000BaseFX

Optical Fiber
 100BaseFX 1000BaseFX
Multi-mode Single-mode Multi-mode Single-mode
Distance 2km,1310nm 25km,1310nm 500m,850nm 2km,1310nm 25km,1310nm
Max. -20dBm -10dBm -10dBm -10dBm -10dBm
Min. -14dBm -3dBm -3dBm -3dBm -3dBm
Sensitivit <-15dBm <-30dBm <-18dBm <-18dBm <-22dBm
y

Power Requirements and Environmental Limits

100BaseFX 1000BaseFX
Input Voltage 5V
Power 5W
Operating Temperature -20 - + 70°C
Storage Temperature -40 ~ + 85°C
Ambient Relative 5~95%(non-condensing)
Humidity

Other
100BaseFX 1000BaseFX
Interna Wit External With Internal External
l power h power 4 RJ-45 power power
supply 2 supply supply supply
RJ-
45
Dimensions(mm 94x70x25 140x110x3 215x110x3 94x70x25 140x110x3
) 0 0 0
Weight(g) 148 400 666 148 400
Out carton 240x120x58 230x160x7 295x175x9 240x120x5 230x160x7
Dimensions(mm 0 5 8 0
)
Out carton 396 665 1055 396 685
Weight(g)

Schematic diagram of Panel

10/100M external type power supply fiber media converter panel

10/100M internal type power supply fiber media converter panel
FDX Green RJ 45-Full duplex mode Lit
RJ 45-Full duplex mode Off
Fx106 Green RJ 45-100M mode Lit
RJ 45-10M mode Off
ACT Green RJ 45-Link normal Lit/Blink
RJ 45-Link unusual Off
Tx10 Green Optical port-100M mode Lit
0 Optical port-10M mode Off
LINK Green Optical port link normal Lit/Blink
Optical port link unusual Off
PWR Green Power supply Normal Lit
Power supply unusual Off

Two electrical ports 10/100M fiber media converter port panel

F Green RJ-45-Full duplex mode Lit
RJ-45-Half duplex mode Off
E1 100 Green RJ-45-100M mode Lit
E2 RJ-45-10M mode Off
T Green RJ-45-Link normal Lit/Blink
RJ-45-Link unusual Off
F Green Optical port received optical signal Lit
Optical port don’t received optical signal Off
Fibe R Green Optical port link normal Lit/Blink
r Optical port link unusual Off
P Green Power supply Normal Lit
Power supply unusual Off
Four electrical ports 10/100M fiber media converter port panel
FDX Gree RJ 45-Full duplex mode Lit
n RJ 45-Full duplex mode Off
E1 100 Gree RJ 45-100M mode Lit/Blink
E2 n
E3 RJ 45-10M mode Off
E4 LINK Gree RJ 45-Link normal Lit/Blink
n RJ 45-Link unusual Off
100 Gree Optical port-100M mode Lit
n Optical port-10M mode Off
Fibe LINK Gree Optical port link normal Lit
r n Optical port link unusual Off
PWR Gree Power supply Normal Lit
n Power supply unusual Off

10/100M external type power supply fiber media converter panel

10/100M internal type power supply fiber media converter panel

FDX Green RJ 45-Full duplex mode Lit
RJ 45-Full duplex mode Off
100 Green RJ 45-100M mode Lit
RJ 45-1000M mode Off
ACT Green RJ 45-Link normal Lit/Blink
RJ 45-Link unusual Off
 1000 Green Optical port-1000M mode Lit
Optical port-10/100M mode Off
LINK Green Optical port link normal Lit/Blink
Optical port link unusual Off
PWR Green Power supply Normal Lit
Power supply unusual Off

Communication Connections
RJ 45 (8-pin) to RJ45 (8-pin) Straight-Trough Cable Wiring

RJ 45 (8-pin) to RJ45 (8-pin) Cross-Trough Cable Wiring

Fiber Optical Port Connection

Figure 1,SC.SC Duplex fiber media converter connection way.
“Tx” is fiber module’s transmitting port, while “RX” is fiber module’s receiving port. “A”
fiber media converter’s transmitting port (TX) should be connected with “B” fiber media
converter’s media receiving port (RX), at the same time, “A” fiber media converter’s
receiving port (RX) should be connected with “B” fiber media converter’s transmitting port
(TX)

SC-Port to SC-Port Cable Wiring

Figure 2 SC-SC Simplex fiber media converter connection way.
“A” fiber media converter’s fiber terminal port should be connected with “B” fiber media
converter’s fiber terminal port.
SC-Port to SC-Port Cable Wiring
10/100M Media Converter Support LFP (Link Fault Pass)
Speed switch setting explanation
Switch Function Indicated Remark
gear
AUTO Using 10/100M auto-adaptation Factory acquiescence
DIS Turn off 10/100M auto- /
adaptation
100M Fixing 100M speed Should be effective with choosing “DIS”
gear
10M Fixing 10M speed
FULL Fixing Full Duplex
HALF Fixing Half Duplex
LL-DIS Turn off link alarm function Factory acquiescence
LL-EN Using link alarm function /
Note: Should electrity fiber media converter after changing switch gear every time, or else
Useless.

LFP (Link Fault Pass) Function Explanation

On the condition of using LFP, electrical interface abnormaly will be transmitted to fiber
interface, Below diagram shows the LFP working progress:
When electrical interface on local side converter ogcurs abnormal condition(1), fiber
interface will send one”non-idle”signs to notice fiber interface on remote and
converter(2).hence it gets the signal of link abnormity(3). then remote and converter force to
close electrical interface(4). following the indicator on switcher or network card which link to
formal electrical interface goes out(5). Basic on this mechanism, converter can reflect
electrical interface abnormal condition of local elde to terminal converter one, then alarm it
by indicator.

HS Air Po
 High Strong High Connect
Ethernet Reverse POE
Fiber Optic Media Converter

10/1000BASE-TX to 100/1000BASE-FX

1 X Fiber Port + 2 X RJ45 Port

1 X Fiber Port + 4 X RJ45 Port
1 X Fiber Port + 8 X RJ45 Port
2 X Fiber Port + 1 X RJ45 Port
2 X Fiber Port + 2 X RJ45 Port
2 X Fiber Port + 4 X RJ45 Port

USER MANUAL
www.hsairpo.co.id www.hsairpo.com
Copyright HS-Airpo . All Right Reserved, Made in China

1. INTRODUCTION
The media converter can convert between 2-8 twisted pair electrical signals and
optical signals. It extends the transmission distance of the network from the limit of
100 meters of copper wire to 800Km, and realizes the data transmission between the
two network connection media by using two network transmission technologies: the
data link layer 2 store-and-forward mode or the physical layer 1 pass-through mode.
Transmission. Support dual-fiber multimode, dual-fiber single-mode and single-fiber
single-mode optical fiber transmission.

2. Applicable Models
The Manual can be applied to the following models:
 1 X Fiber Port + 2 X RJ45 Port
 1 X Fiber Port + 4 X RJ45 Port
 1 X Fiber Port + 8 X RJ45 Port
 2 X Fiber Port + 1 X RJ45 Port
 2 X Fiber Port + 2 X RJ45 Port
 2 X Fiber Port + 4 X RJ45 Port
 3. CONNECTION DIAGRAM

4. TECHNICAL SPECIFICATIONS
Standards IEEE802.3 10Base-T Power type: external
IEEE802.3u 100Base-TX/FX power supply
IEEE802.3x Flow control Power Input Voltage:
IEEE802.1p QoS AC100V~240V
IEEE802.3d Spanning Tree 5G/60Hz
Connector:DC 5V/2A
Power Consumption:
1.5W~2.5W
Power Supply
Support 5~12v
Passive POE by Lan
1 Port
Ethernet Connector: RJ45
Port Data Rate: 10/100/1000M
Distance: 100m
UTP Type: UTP-5E or higher
level
Fiber Port Connector: SC Transmission Twisted Pair: 100m
Data Rate: 1.25Gbs Distance (CATSe, CAT6,
Optical Wavelength: cables)
850nm/1310nm/1490nm/1550nm Single-mode: 3km or
 Distance: 3km or 20km 20km
100,000 hours
MTBF

Performance Processing Type: Store and

Forward
MAC Table Size: 8K Storage Temperature:
Buffer Space: 1Mbit Environment -40~70 °C
Jumbo Packet: 1518 bytes Operating
Back bandwidth: 5.6G Temperature: -10~55
Time Delay: <150µs °C
Relative Humadity:
5-90% (no
condensation)

5. Interface and Indicator Description

Take Gigabit 2F04E as an example:

Gigabit 2FO4E front panel Gigabit 2FO4E front panel

Gigabit 2 FO4E Indicator light function description:

Indicator Name State Explanation
Light
1~4 RJ45 port Light Up The RJ45 Port connection is normal
indicator
Flashing The data transmission of the RJ45 port is
normal
Light RJ45 port not connected
Off

6. PACKING ACCESSORIES
Fiber Media Converter *1
Power Adapter *1
User Manual *1
 7. WARRANTY CARD
Product Name
Product Model
User Name
Sell’s
Company
Repair Record

www.hsairpo.co.id www.hsairpo.com
Copyright HS-Airpo .All Right Reserved ,Made in China

Spesifikasi converter 2 fiber optic 4 ethernet 1000 base

Converter yang digunakan type HSAirPO Ethernet Fiber Switch
Model No.: HS-CM2F4EG-POE

Spesifikasi converter 2 fiber optic ethernet 1000 base

1000 Base
Connector Type SC SC
Fiber Type Multi-mode Single-mode
Wavelength 1310 nm 1310 nm
Min TX PWR -10.0 dBm -10.0 dBm
Max TX PWR -3 dBm -3 dBm
Sensitivity -18.0 dBm -22 dBm
Link Budget 8.0 dB 12.0 dB
 D.3 Aspek Finansial
Harga
No Alat Bahan Ongkir Jumlah Total
Satuan
1 Konverter 3F3E 100
Base Rp. 150.000 Rp. 8.000 2 buah Rp. 344.500

2 Konverter 1F1E 100

Base
Rp. 71.200 Rp. 9.500 2 buah Rp. 151.900

3 Konverter 1F1E 1000

Rp. 8 buah (4
Base Rp. 128.000 Rp. 559.000
47.000 pasang)
4 Konverter 6F2E 1000
Base
Rp.
Rp. 189.600 4 buah Rp. 777.400
19.000

5 Konverter 2F4E 100

2 buah
Base Rp. 94.000 Rp. 9.500 Rp. 103.500
(1 pasang)
6 Patch core
Rp. 9.600 Rp. 9.500 13 (5 meter an) Rp. 134.300
TOTAL Rp. 2.070.600
 E. Kesimpulan
F. Rekomendasi Akhir

G. Lampiran
Tabel Alat bahan yang dibutuhkan dalam pembangunan jaringan Ethernet FO
No Alat Bahan Link
1 Konverter 6F2E 100 Base

https://shopee.co.id/100Mbps-6-port-sc-Fiber-2-
port-RJ45-Fiber-Optic-Ethernet-Converter-
i.1165305165.24458786389?xptdk=0dc68793-
1414-46e7-bb35-77d410df07f0

2 Konverter 3F3E 100 Base

https://shopee.co.id/MEDIA-CONVERTER-3F3E-
3-FO-3-ETH-10-100Mbps-
i.6515551.13185152397?sp_atk=6adaf867-c0f3-
47e5-85d3-6c67e7873cee&xptdk=6adaf867-c0f3-
47e5-85d3-6c67e7873cee

3 Konverter 1F1E 1000 Base https://shopee.co.id/Fiber-Optic-Media-Converter-

HTB-GS-03-A-B-Optical-Netlink-HTBGS03-
1000Mbps-Single-Mode-3100-RJ45-
i.92926274.5362282319?sp_atk=183e3a27-f7aa-
4d2d-bf66-045678921702&xptdk=183e3a27-f7aa-
4d2d-bf66-045678921702
4 Konverter 2F4E 1000 Base

https://shopee.co.id/%E3%80%90Support-POE
%E3%80%91100Mbps-2F4E-Converter-4-RJ45-2-
SC-Ethernet-Fiber-Converter-
i.1165305165.25258785685?xptdk=8f7f3a3e-
e79d-4f5a-a39d-696eff9868c4

5 Konverter 1F1E 100 Base

https://shopee.co.id/Sepasang-HTB-3100-Fiber-
Optic-Media-Konverter-Single-Mode-dengan-5V-
2A-EU-Adaptor-i.1165305165.22563665248?
xptdk=352506cb-8bea-4176-a1e8-245ab14bf16b

6 Patch core https://shopee.co.id/Kabel-Fiber-Optic-Patch-

Cord-Warna-Kuning-1M-2M-3M-5M-FO-Patch-
Cord-Single-Mode-SC-SC-1PCS-
i.1165305165.24758776951?xptdk=c07f96e6-
d159-4cc1-aa9e-65554d8ea6ed