Anabond® Technical Data Sheet
October, 2012
Anabond Neveseiz C-975 Total pages 2
Product Description conditions. Neveseiz C-975
975 can be used direct
from the supplied containers by brush on to the
Anabond Neveseiz C-975 exhibits the following
product characteristics: parts. The parts should be clean and free from
foreign particles. Neveseiz C-975
C has good
Appearance Smooth bead wetting properties, yet proper care should be
taken to spread the compound through the
th entire
Colour Copper like colour
mating area, with the use of a brush.
Specific Gravity 1.48 – 1.68
Typical Uses
Viscosity Paste
Lap Shear Strength @ 300
Prevents seizure in bolts and nuts, studs due
No load
±5°C For 5 hours to extreme temperature in Turbine. Air
Heat Aging test – M10 Bolt compressor, Jet engine parts, Boilers, Tyre
& Nut applied with C 975 curing machines, Hot forgoing moulds etc.
and tightened to 1 Kg.m Break loose torque
torque and kept at 900 ± < 1.5 Used as a lubricant in gears, chains, cables,
10°C Kg.m
For 12 hours at RT
sprockets, rollers and hinges of machines
and equipments.
Salt Spray test on M 10 Bolt
Ensures proper torque and eliminates thread
& Nut applied with C 975 Break loose torque
and tightened to 1 Kg.m for < 1.5 seizure in Aluminium
luminium and stainless steel
168Hrs
bodies.
-40 ± 2°C
C to 900 ± Heavy interference fit sprockets and gears
Temperature Resistance °C
10°C
are assembled using Neveseiz C-975
ensuring easy disassembly using proper
Neveseiz C-975 is an anti-seize
seize compound
tools. No fretting corrosion and seizing and
formulated from colloidal copper and graphite
hence avoids cutting by torch, saving
which permits easy assembly and disassembly of
valuable machinery parts.
close fitting parts and threaded faste
fasteners.
Useful in flanged pipelines of Refineries.
Neveseiz C-975 comes in ready to use tins and
Reduces corrosion and seizing in Fertilizer
can be applied by brush. Neveseiz C
C-975
plants due to strong
ng chemical action and
adheres
dheres to the part and does not wash away with
weathering.
fluids. Chemically inert and non-volatile,
volatile, it will not
Used as gasket coat application, makes
leave any carbon residue on threads. It remains
removal of gasket easier without damage.
non-hardening
hardening even under extreme heat or cold
Anabond is a Registered Trademark | ed. 1
1-10102012/847323562537 2975 Page 1 of 2
Used in n ore processing and slurry handling production methods mentioned herein and to
equipments. adopt such precautions as may be advisable for
Used in Furnace flanges and bolts. the protection of property and of persons against
Exhaust flange bolts and nuts in Automotives any hazards that may be involved in the handling
and earth moving equipments. and use thereof.
Advantages
For product information contact:
The product eliminates galling & cold welding of
threaded assemblies and prevents seizing
Anabond Limited
36, Type II, Dr. VSI Estate,
corrosion in press fitted assemblies and Thiruvanmiyur,
fasteners. It also lubricates assemblies exposed Chennai 600041 India
Ph: +91 (44) 23460041/42/43
to temperature upto 975°C. Fax: +91 (44) 2346 0048
e-mail: [email protected]
Handling web: www.anabond.com
Neveseiz does not contain any harmful lead
compound, stable at room temperature and is
non-toxic. Extinguishing media CO2 dry
chemicals. Special fire fighting procedures same
as for petroleum grease fires.
Storage
Store in cool dry place away from heat source
and direct sunlight
Packing
500 g & 1 kg
Disclaimer:
The data contained herein are furnished for
information only and are believed to be reliable.
We cannot assume responsibility for the results
obtained by others over whose methods we have
no control. It is the user's responsibility to
determine suitability for the user's purpose of any
Anabond is a Registered Trademark | ed. 1-10102012/847323562537 2975 Page 2 of 2
