ELECTRICAL GENERAL NOTES:

1. ALL ELECTRICAL INSTALLATIONS HEREIN AND OTHER RELATED WORKS TO BE DONE IN

THIS BUILDING SHALL BE IN ACCORDANCE WITH THE PROVISIONS AND STANDARDS OF
THE FOLLOWING:
1.1 THE LATEST EDITION OF THE PHILIPPINE ELECTRICAL CODE.
1.2 REPUBLIC ACT 7926 OTHERWISE KNOWN AS THE NEW ELECTRICAL
LEGEND
ENGINEERING LAW
LED STRIP 1.3 THE NATIONAL BUILDING CODE OF THE PHILIPPINES.
PINLIGHT
1.4 FIRE CODE OF THE PHILIPPINES.
1.5 EXISTING RULES AND REGULATION OF THE LOCAL POWER UTILITY COMPANY.
PENDANT
1.6 THE EXISTING CITY/MUNICIPAL ORDINANCES AND,
CO
2-GANG CONVENIENCE OUTLET 1.7 THE BUREAU OF LABOR STANDARDS.
2. ALL ELECTRICAL INSTALLATIONS HEREIN SHALL BE DONE UNDER THE DIRECT
RANGE OUTLET
RANGE
SUPERVISION OF A DULY REGISTERED ELECTRICAL ENGINEER. HE SHALL BE RESPONSIBLE
REF
REFRIGERATOR OUTLET IN THE INTERPRETATION OF THE PLANS AND SPECIFICATION AND THE REQUIRED
PB

PANEL BOARD
STANDARDS OF THE ELECTRICAL CODE.
3. MATERIALS AND EQUIPMENT TO BE USED SHALL HAVE INSPECTED COMMODITY
s2 2 GANG SWITCH
CLEARANCE (ICC) LABEL FOR FOREIGN MADE PRODUCTS AND P.S. MARK FOR LOCAL IN
s3 3 GANG SWITCH NATURE OF THE BUREAU OF PRODUCT STANDARD (BPS).
4. PROVIDE GROUNDING WIRE TO ALL OUTLETS AND LIGHTING CIRCUITS, ALL NON CURRENT
CIRCUIT
CARRYING METAL PARTS SHALL BE GROUNDED AND BOBDED INCLUDING FENCE AND
CHANDELIER GATE.
5. ALL PANEL BOARDS, MAIN DISTRIBUTION PANELS, ETC., SHALL HAVE GROUNDING BUS FOR
LIGHTING SWITCH LINE
BRANCH CIRCUITS AND SUB FEEDER GROUNDING SYSTEM SHALL BE BONDED TO THE
LIGHTING CIRCUIT LINE NEAREST METAL WATER PIPE.
6. MOUNTING HEIGHT FOR ALL WIRING DEVICES AND PANEL BOARDS SHALL BE.
POWER CIRCUIT LINE
6.1 LIGHTING OUTLETS 1.40M ABOVE FLOOR FINISH.
GROUND LUGS 6.2 CONVENIENCE OUTLETS 0.30M ABOVE FLOOR FINISH.
6.3 TELEPHONE OUTLETS 0.30M ABOVE FLOOR FINISH.
KWHM KILOWATTHOUR METER
6.4 PANEL BOARDS & CABINETS 1.40M ABOVE FLOOR FINISH.
M WATT HOUR METER 7. WIRING METHODS SHALL BE AS FOLLOWS:
7.1 SERVICE ENTRANCE RESISTS INTERMEDIATE METALLIC CONDUIT (IMC).
FIRE EXTINGUISHER
7.2 LIGHTING AND POWER SYSTEM POLYVINYL CHLORIDE (PVC).
EM EMERGENCY LIGHT 7.3 TELEPHONE OUTLETS POLYVINYL CHLORIDE (PVC).
7.4 ALL VIBRATING EQUIPMENTS LIQUID TIGHT FLEXIBLE METAL CONDUIT.
8. NO CHANGES OR MODIFICATION SHALL BE MADE WITHOUT THE DESIGNERS WRITTEN
CONSENT.
9. ALL WORKS SHALL BE EXECUTED IN A WORKMANSHIP MANNER AND SHALL PREVENT A
NEAT AND ORDERLY ACCEPTANCE. ALL WIRING SHALL BE CONCEALED IN THE LEAST
POSSIBLE WAY.

PREPARED BY: PTR NO. SIGN AND SEAL : PROPOSED : PROJECT BY : SHEET CONTENT : SHEET NO :
ALE COMPANY AT:
ENGR. EDEN JEN M. SANTOS
Brgy. San Roque 2, San Jose, Occidental Mindoro CP No. 09368058925 PROPOSED TWO-STOREY RESIDENTIAL BUILDING
ALE COMPANY
WHERE RENTALS MEET PERFECTION
THESE DRAWINGS ARE SOLELY OWNED BY ALE COMPANY AND
CANNOT BE USED WITHOUT PROPER AUTHORIZATION FROM A
LICENSED ENGINEER, NO PART OF THIS PLAN MAY BE REPRODUCE
OR TRANSMITTED IN ANY FORM OR ANY MEANS, ELECTRONIC OR
MECHANICAL, INCLUDING PHOTOCOPYING, RECORDING, OR BY
ANY INFORMATION STORAGE AND RETRIEVAL SYSTEM, WITHOUT
DATE:
REG. NO.
TIN.
ENGR. AIRA MAE L. SEGUROS
ENGR. JOHN LAN D. TAGATAC
CIVIL ENGINEERS
LOCATION :
BRGY. LABANGAN POBLACION, SAN JOSE, OCCIDENTAL MINDORO
OWNER
GENERAL NOTES
E-3
THE WRITTEN PERMISSION OF THE OWNER.