0% found this document useful (0 votes)
21 views

Multiple Access Techniques-Part1

Uploaded by

Mina Emad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
21 views

Multiple Access Techniques-Part1

Uploaded by

Mina Emad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

Multiple Access Techniques for

Wireless Communications
Chapter 9
Part 1
Outlines
• Duplexing
– Time Division Duplexing (TDD)
– Frequency Division Duplexing (FDD)
• Multiple Access
– FDMA
– TDMA
– Spread Spectrum Multiple Access
• Frequency Hopped Multiple Access (FHMA)
• Code Division Multiple Access (CDMA)
• Space Division Multiple Access (SDMA)
• Capacity of cellular systems
Introduction
• Multiple access schemes are used to allow many
mobile users to share simultaneously a finite amount
of radio spectrum.
– High capacity is required.
– must be done without severe degradation in the
performance.
• Duplexing is needed to allow subscribers send and
receive information simultaneously.
Duplexing
• Using frequency or time domain techniques.
• Frequency division duplexing (FDD)
– Provides two distinct bands of frequencies for
every user.
– Forward band----from the base station to the
mobile
– Reverse band----from the mobile to the base.
– Consists of two simplex channels
– Duplexer is used
– The frequency split between the forward and
reverse channel is constant.
• Time division duplexing (TDD)
– Uses time to provide both a forward and reverse
link.
– If the time split between the forward and reverse
time slot is small, then the transmission and
reception of data appears simultaneous.
– Allows communication on a single channel and
simplifies the subscriber equipment since a
duplexer is not required.
Trade-offs between FDD and TDD
• FDD
– Each transceiver simultaneously transmits and receives radio
signals, the frequency allocation used for the forward and
reverse channels must be carefully coordinated with out-of-
band users that occupy spectrum between these two bands.
– The frequency separation must be coordinated to permit the
use of inexpensive RF technology.
• TDD
– Eliminate the need for separate forward and reverse
frequency bands.
– There is a time latency due to the fact that communications
is not full duplex in the truest sense.
Multiple Access
Narrowband Systems
– The available radio spectrum is divided into a large number of narrowband
channels.
– Each channel is relatively narrow compared with the coherence bandwidth.
– The channels are usually operated using FDD.
– To minimize interference between forward and reverse links, the frequency
split is made as great as possible
allowing inexpensive duplexers
• Narrowband FDMA ---- a user is assigned a particular channel which is
not shared by other users.
If FDD is used, the system is called FDMA/FDD.
• Narrowband TDMA ---- allows users to share the same channel but
allocates a unique time slot to each user.
– For narrowband TDMA, there generally are a large number of channels
allocated using either FDD or TDD, and each channel is shared using TDMA.
TDMA/FDD or TDMA/TDD
Wideband systems
• The transmission bandwidth of a single channel is
much larger than the coherence bandwidth.
• A large number of transmitters are allowed to
transmit on the same channel.
• Wideband TDMA ---- allocates time slots to the many
transmitters on the same channel and allows only one
transmitter to access the channel at any instant of
time
TDMA/FDD, TDMA/TDD
• Wideband CDMA ---- allows all of the transmitters to
access the channel at the same time.
CDMA/FDD, CDMA/TDD
9.2 Frequency Division Multiple
Access (FDMA)
• Each user is allocated a unique frequency
band or channel.
• These channels are assigned on demand, and
can not be shared.
The features of FDMA:
Nonlinear Effects in FDMA:
Advanced Mobile Phone System
(AMPS)
9.3 Time Division Multiple Access
(TDMA)
The features of TDMA:
Efficiency of TDMA:
Number of channels

You might also like