HCC/HCF4585B

4-BIT MAGNITUDE COMPARATOR

. EXPANSION TO 8, 12, 16 ... 4 N BITS BY CAS-

. CADING UNITS
MEDIUM-SPEED OPERATION : COMPARES

. TWO 4-BIT WORDS IN 180ns (typ.) AT 10V

STANDARDIZED SYMMETRICAL OUTPUT

.. CHARACTERISTICS
5V, 10V, AND 15V PARAMETRIC RATINGS
INPUT CURRENT OF 100nA AT 18V AND 25°C
EY
(Plastic Package)
F
(Ceramic Frit Seal Package)

.. FOR HCC DEVICE

100% TESTED FOR QUIESCENT CURRENT
MEETS ALL REQUIREMENTS OF JEDEC TEN-
TATIVE STANDARD N° 13A, ”STANDARD SPE-
CIFICATIONS FOR DESCRIPTION OF ”B” M1 C1
SERIES CMOS DEVICES” (Micro Package) (Plastic Chip Carrier)
ORDER CODES :
HCC4585BF HCF4585BM1
HCF4585BEY HCF4585BC1

PIN CONNECTIONS

DESCRIPTION
The HCC4585B (extended temperature range) and
HCF4585B (intermediate temperature range) are
monolithic integrated circuits, available in 16-lead
dual in-line plastic or ceramic package, and plastic
micro package. The HCC/HCF4585B is a 4-bit mag-
nitude comparator designed for use in computer and
logic applications that require the comparison of two
4-bit words. This logic circuit determines whether
one 4-bit word (Binary or BCD) is ”less than”, ”equal
to”, or ”greater than” a second 4-bit word. The
HCC/HCF4585B has eight comparing inputs (A3,
B3, through A0, B0), three outputs (A < B, A = B, A >
B) and three cascading inputs (A < B, A = B, A > B)
that permit systems designers to expand the com-
parator function to 8, 12, 16 ... 4 N bits. When a
single HCC/HCF4585B is used, the cascading in-
puts are connected as follows : (A < B) = low,
(A = B) = high, (A > B) = high. Cascading these units
for comparison of more than 4 bits is accomplished
as shown in typical application.

June 1989 1/12

HCC/HCF4585B

FUNCTIONAL DIAGRAM

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Value Unit
V DD* Supply Voltage : HC C Types – 0.5 to + 20 V
H C F Types – 0.5 to + 18 V
Vi Input Voltage – 0.5 to V DD + 0.5 V
II DC Input Current (any one input) ± 10 mA
Pt ot Total Power Dissipation (per package) 200 mW
Dissipation per Output Transistor
for T o p = Full Package-temperature Range 100 mW
Top Operating Temperature : HCC Types – 55 to + 125 °C
H CF Types – 40 to + 85 °C
Tstg Storage Temperature – 65 to + 150 °C
Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections
of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability.
* All voltages are with respect to VSS (GND).

RECOMMENDED OPERATING CONDITIONS

Symbol Parameter Value Unit
V DD Supply Voltage : H CC Types 3 to 18 V
H C F Types 3 to 15 V
VI Input Voltage 0 to V DD V
Top Operating Temperature : HCC Types – 55 to + 125 °C
H CF Types – 40 to + 85 °C

2/12
 HCC/HCF4585B

LOGIC DIAGRAM

TRUTH TABLE
Inputs
Outputs
Comparing Cascading
A 3, B3 A2, B2 A1, B1 A0, B0 A< B A=B A >B A<B A =B A>B
A3 > B3 X X X X X 1 0 0 1
A3 = B3 A2 > B2 X X X X 1 0 0 1
A3 = B3 A2 = B2 A1 > B1 X X X 1 0 0 1
A3 = B3 A2 = B2 A1 = B1 A0 > B0 X X 1 0 0 1
A3 = B3 A2 = B2 A1 = B1 A0 = B0 0 0 1 0 0 1
A3 = B3 A2 = B2 A1 = B1 A0 = B0 0 1 X 0 1 0
A3 = B3 A2 = B2 A1 = B1 A0 = B0 1 0 X 1 0 0
A3 = B3 A2 = B2 A1 = B1 A0 < B0 X X X 1 0 0
A3 = B3 A2 = B2 A1 < B1 X X X X 1 0 0
A3 = B3 A2 < B2 X X X X X 1 0 0
A3 < B3 X X X X X X 1 0 0
X = Don’t Care Logic 1 = High Level

3/12
HCC/HCF4585B

STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions)

Test Conditions Value
Symbol Parameter VI VO |I O | V D D T L o w* 25 °C T Hi g h * Unit
(V) (V) (µA) (V) Min. Max. Min. Typ. Max. Min. Max.

IL Quiescent 0/ 5 5 5 0.04 5 150

Current 0/10 10 10 0.04 10 300
HCC
Types 0/15 15 20 0.04 20 600
0/20 20 100 0.08 100 3000 µA
0/ 5 5 20 0.04 20 150
HCF
0/10 10 40 0.04 40 300
Types
0/15 15 80 0.04 80 600
V OH Output High 0/ 5 <1 5 4.95 4.95 4.95
Voltage 0/10 <1 10 9.95 9.95 9.95 V
0/15 <1 15 14.95 14.95 14.95
V OL Output Low 5/0 <1 5 0.05 0.05 0.05
Voltage 10/0 <1 10 0.05 0.05 0.05 V
15/0 <1 15 0.05 0.05 0.05
V IH Input High 0.5/4.5 <1 5 3.5 3.5 3.5
Voltage 1/9 <1 10 7 7 7 V
1.5/13.5 < 1 15 11 11 11
V IL Input Low 4.5/0.5 <1 5 1.5 1.5 1.5
Voltage 9/1 <1 10 3 3 3 V
13.5/1.5 < 1 15 4 4 4
I OH Output 0/ 5 2.5 5 – 2 – 1.6 – 3.2 – 1.15
Drive 0/ 5 4.6 5 – 0.64 – 0.51 – 1 – 0.36
HCC
Current
Types 0/10 9.5 10 – 1.6 – 1.3 – 2.6 – 0.9
0/15 13.5 15 – 4.2 – 3.4 – 6.8 – 2.4
mA
0/ 5 2.5 5 – 1.53 – 1.36 – 3.2 – 1.1
HCF 0/ 5 4.6 5 – 0.52 – 0.44 – 1 – 0.36
Types 0/10 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9
0/15 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4
I OL Output 0/ 5 0.4 5 0.64 0.51 1 0.36
Sink HCC
0/10 0.5 10 1.6 1.3 2.6 0.9
Current Types
0/15 1.5 15 4.2 3.4 6.8 2.4
mA
0/ 5 0.4 5 0.52 0.44 1 0.36
HCF
0/10 0.5 10 1.3 1.1 2.6 0.9
Types
0/15 1.5 15 3.6 3.0 6.8 2.4
I IH , I IL Input HCC ± 0.1 ±10 – 5 ± 0.1 ± 1
0/18 18
Leakage Types
Current
Any Input µA
HCF
0/15 15 ± 0.3 ±10 – 5 ± 0.3 ± 1
Types
CI Input Capacitance Any Input 5 7.5 pF
* TLo w = – 55°C for HCC device : – 40°C for HCF device.
* THigh = + 125°C for HCC device : + 85°C for HCF device.
The Noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5V min. with VDD = 15V.

4/12
 HCC/HCF4585B

DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, C L = 50pF, R L = 200kΩ,

typical temperature coefficient for all V DD values is 0.3%/°C, all input rise and fall time = 20ns)
Test Conditions Value
Symbol Parameter Unit
V D D (V) Min. Typ. Max.
t PHL , Propagation Delay Time 5 300 600
tP LH Comparing Inputs to Outputs 10 125 250 ns
15 80 160
Cascading Input to Outputs 5 200 400
10 80 160 ns
15 60 120
t T HL , Transition Time 5 100 200
tTLH 10 50 100 ns
15 40 80

Output Low (sink) Current Characteristics. Output High (source) Current Characteristics.

Typical Transition Time vs. Load Capacitance. Typical Propagation Delay Time (comparing in-
puts to outputs) vs. Load Capacitance.

5/12
HCC/HCF4585B

Typical Dynamic Power Dissipation vs. Clock

Input Frequency.

TYPICAL APPLICATION
TYPICAL SPEED CHARACTERISTICS OF A 12-BIT COMPARATOR

6/12
 HCC/HCF4585B

TEST CIRCUITS
Quiescent Device Current. Input Voltage.

Input Leakage Current. Dynamic Power Dissipation.

7/12
HCC/HCF4585B

Plastic DIP16 (0.25) MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.

a1 0.51 0.020

B 0.77 1.65 0.030 0.065

b 0.5 0.020

b1 0.25 0.010

D 20 0.787

E 8.5 0.335

e 2.54 0.100

e3 17.78 0.700

F 7.1 0.280

I 5.1 0.201

L 3.3 0.130

Z 1.27 0.050

P001C

8/12
 HCC/HCF4585B

Ceramic DIP16/1 MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.

A 20 0.787

B 7 0.276

D 3.3 0.130

E 0.38 0.015

e3 17.78 0.700

F 2.29 2.79 0.090 0.110

G 0.4 0.55 0.016 0.022

H 1.17 1.52 0.046 0.060

L 0.22 0.31 0.009 0.012

M 0.51 1.27 0.020 0.050

N 10.3 0.406

P 7.8 8.05 0.307 0.317

Q 5.08 0.200

P053D

9/12
HCC/HCF4585B

SO16 (Narrow) MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 1.75 0.068
a1 0.1 0.2 0.004 0.007
a2 1.65 0.064
b 0.35 0.46 0.013 0.018
b1 0.19 0.25 0.007 0.010
C 0.5 0.019
c1 45° (typ.)
D 9.8 10 0.385 0.393
E 5.8 6.2 0.228 0.244
e 1.27 0.050
e3 8.89 0.350
F 3.8 4.0 0.149 0.157
G 4.6 5.3 0.181 0.208
L 0.5 1.27 0.019 0.050
M 0.62 0.024
S 8° (max.)

P013H

10/12
 HCC/HCF4585B

PLCC20 MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.

A 9.78 10.03 0.385 0.395

B 8.89 9.04 0.350 0.356

D 4.2 4.57 0.165 0.180

d1 2.54 0.100

d2 0.56 0.022

E 7.37 8.38 0.290 0.330

e 1.27 0.050

e3 5.08 0.200

F 0.38 0.015

G 0.101 0.004

M 1.27 0.050

M1 1.14 0.045

P027A

11/12
HCC/HCF4585B

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No
license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express
written approval of SGS-THOMSON Microelectonics.

 1994 SGS-THOMSON Microelectronics - All Rights Reserved

SGS-THOMSON Microelectronics GROUP OF COMPANIES

Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands -
Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A

12/12