DR.D.Y.PATIL.

POLYTECHNIC,KOLHAPUR

INTRODUCTION

Zener diode

A Zener Diode is a reverse biased, heavily doped semiconductor P-N junction diode which is
operated in breakdown region. Different semiconductors can be used to obtain a diode(like
Silicon, Germanium etc.,).

When a zener is forward biased, its characteristics are just as those of an ordinary diode. As
the reverse voltage applied to P-N junction is increased, a value is reached at which the
current increases greatly from its normal cut off value. This voltage is called a Zener voltage
Vz or breakdown voltage. So, when a Zener diode is reverse biased it has sharp breakdown
voltage called Zener voltage

Diodes generally are known as a device that allows the flow of current in one direction
(forward biased) and offers resistance to the flow of current when used in reverse bias. Zener
Diode (Named after the American scientist C. Zener who first explained its operational
principles) on the other hand, not only allow the flow of current when used in forward bias,
but they also allow the flow of current when used in the reversed bias so far the applied
voltage is above the breakdown voltage known as the Zener Breakdown Voltage. Or in
other words Breakdown voltage is the voltage, on which Zener Diode starts conducting in
reverse direction.

1
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

Operational Principle of Zener Diode

In normal diodes, the breakdown voltage is very high and the diode gets damaged totally if a
voltage above the breakdown diode is applied, but in Zener diodes, the breakdown voltage is
not as high and does not lead to permanent damage of the zener diode if the voltage is
applied.

As the reverse voltage applied to the Zener diode increases towards the specifiIntroduction
Diodes generally are known as a device that allows the flow of current in one direction
(forward biased) and offers resistance to the flow of current when used in reverse bias. Zener
Diode (Named after the American scientist C. Zener who first explained its operational
principles) on the other hand, not only allow the flow of current when used in forward bias,
but they also allow the flow of current when used in the reversed bias so far the applied
voltage is above the breakdown voltage known as the Zener Breakdown Voltage. Or in
other words Breakdown voltage is the voltage, on which Zener Diode starts conducting in
reverse direction.

Consider the Images below of a normal diode in action.

To show the of the zener diode, consider the two experiments (A and B) below.

2
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

In Experiment A, a 12V zener diode is connected in reversed biased as shown in the image
and it can be seen that the zener diode blocked the voltage effectively because it was
less/equal to the breakdown voltage of the particular zener diode and the lamp thus stayed
off.

In Experiment B, a 6v Zener Diode used is conducting (the bulb comes on) in reverse biased
because the applied voltage is greater than its breakdown voltage and thus shows that
the breakdown region is the region of operation of the zener diode.

The current-voltage characteristic curve of the Zener diode is shown below.

From the graph, it can be deduced that the zener diode operated in the reverse bias mode will
have a fairly constant voltage irrespective of the amount of current supplied.

3
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

Applications of Zener Diode

Zener diodes are used in three main applications in electronic circuits;

2. Waveform Clipper

3. Voltage Shifter

1.Zener Diode as Voltage Regulator

This is arguably the most common application of zener diodes.

This application of the zener diodes relies heavily on the ability of the zener diodes to
maintain a constant voltage irrespective of variations in supply or load current. The general
function of a voltage regulation device is to provide a constant output voltage to a load
connected in parallel to it irrespective of variations in the energy drawn by the load (Load
current) or variations and instability in the supply voltage.

The Zener diode will provide constant voltage provided current stays within the range of the
maximum and minimum reverse current. The circuit diagram showing the Zener diode being
used as a Voltage regulator is shown below.

A resistor, R1 is connected in series with the zener diode to limit the amount of current
flowing through the diode and the input voltage Vin (Which must be greater than the
zener voltage) is connected across as shown in the image and the output voltage Vout, is
taken across the zener diode with Vout = Vz (Zener Voltage). Since the zener diode’s
reverse bias characteristics are what is needed to regulate the voltage, it is connected in
reversed bias mode, with the cathode being connected to the positive rail of the circuit.

4
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

Care must be taken when selecting the value of resistor R1, as a small value resistor will
result in a large diode current when the load is connected and this will increase the power
dissipation requirement of the diode which could become higher than the maximum power
rating of the zener and could damage it.

The value of resistor to be used can be determined using the formula below.

R1 = (Vin – VZ) / IZ

Where;
R1 is the value of the series resistance.
Vin is the input voltage.
Vz which is same as Vout is the Zener voltage
And Iz is the zener current.

By using this formula it becomes easy to ensure that the value of the resistor selected doesn’t
lead to the flow of current higher than what the zener can handle.

One little problem experienced with zener diode based regulator circuits is that the Zener
sometimes generate electrical noise on the supply rail while making attempts to regulate the
input voltage. While this may not be a problem for most applications, this problem may be
solve by the addition of a large value decoupling capacitor across the diode. This helps
stabilize the output of the zener.

5
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

2. Zener Diode as Waveform Clipper

One of the uses of normal diodes is in the application of clipping and clamping
circuits which are circuits that are used to shape or modify an input AC waveform or
signal, producing a differently shaped output signal depending on the specifications of the
clipper or clamper.

Clippers circuits generically are circuits that are used to prevent the output signal of a circuit
from going beyond a predetermined voltage value without changing any other part of the
input signal or waveform.

These circuits along with clampers are widely used in Analog television and FM radio
transmitters for the removal of interference (clamping circuits) and limiting noise peaks by
clipping of high peaks.

Since Zener diodes generically behave like normal diodes when the applied voltage is not
equal to the breakdown voltage, they are also thus used in clipping circuits.

Clipping circuits could be designed to clip the signal either in the positive, negative or
both regions. Although the diode will naturally clip off the other region at 0.7V irrespective
of whether it was designed as a positive or negative clipper.

For example, consider the circuit below.

The clipper circuit is designed to clip the output signal at 6.2v, so a 6.2v zener diode was
used. The zener diode prevents the output signal from going beyond the zener voltage
irrespective of the input waveform. For this particular example, a 20v input voltage was used
and the output voltage on the positive swing was 6.2v consistent with the voltage of the zener
diode. During the negative swing of the AC voltage however, the zener diode behaves just
like the normal diode and clips the output voltage at 0.7V, Consistent with normal silicone
diodes.

6
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

To implement the clipping circuit for the negative swing of the AC circuit as well as the
positive swing in such a way that the voltage is clipped at different levels on the positive and
negative swing, a double zener clipping circuit is used. The circuit diagram for the double
zener clipping circuit is shown below.

7
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

In the clipping circuit above, the voltage Vz2 represents the voltage on the negative swing of
the AC source at which the output signal is desired to be clipped, while voltage Vz1
represents the voltage on the positive swing of the AC source at which the output voltage is
desired to be clipped.

3. Zener Diode as Voltage Shifter

The voltage shifter is one of the simplest but interesting applications of the zener diode. If
you have had experience especially with connecting a 3.3v sensor to a 5V MCU, and have
seen first-hand the errors in readings, etc, that this can lead to them you will appreciate the
importance of voltage shifters. Voltage shifters help convert signal from one voltage to
another and with the ability of the zener diode to maintain steady output voltage in the
breakdown region, it makes them Ideal component for the operation.

In a zener diode based voltage shifter, the circuit, lowers the output voltage, by a value
equal to the breakdown voltage of the particular zener diode that is used. The circuit diagram
for the voltage shifter is illustrated below.

Consider the experiment below,

The circuit describes a 3.3v zener diode based voltage shifter. The output voltage (3.72V) of
the circuit is given by subtracting the breakdown voltage (3.3V) of the zener diode from the
input voltage (7V).

8
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

Vout = Vin –Vz

Vout = 7 – 3.3 = 3.7v

The voltage shifter as describe earlier on has several applications in modern day electronic
circuits design as the design engineer may have to work with up to three different voltage
level at times during design process.

Types of Zener Diodes:

Zener diodes are categorized into types based on several parameters which include;

1. Nominal Voltage

2. Power Dissipation

3. Forward drive current

4. Forward voltage

5. Packaging type

6. Maximum Reverse Current

Nominal Voltage

The nominal Operation voltage of a zener diode is also known as the breakdown voltage of
the zener diode, depending on the application for which the diode is to be used, this is often
the most important criteria for Zener diode selection.

Power dissipation

This represents the maximum amount of power the zener current can dissipate. Exceeding
this power rating leads to excessive increase in the temperature of the zener diode which
could damage it and lead to the failure of the things connected to it in a circuit. Thus this
factor should be considered when selecting the diode with the use in mind.

Maximum Zener Current

This is the maximum current that can be passed through the zener diode at the zener voltage
without damaging the device.

Minimum Zener Current

9
 DR.D.Y.PATIL.POLYTECHNIC,KOLHAPUR

This refers to the minimum current required for the zener diode to start operating in the
breakdown region.Other parameters that serve as the specification for the diode all need to be
fully considered before a decision is made on the type on the kind of zener diode needed for
that peculiar design.

Conclusion

Here are 5 points you should never forget about the zener diode.

1. A zener diode is like an ordinary diode only that it has been doped to have a sharp a
breakdown voltage.

2. The Zener diode maintains a stable output voltage irrespective of the input voltage
provided the maximum zener current is not exceeded.

3. When connected in forward bias, the zener diode behaves exactly like the normal
silicone diode. It conducts with the same 0.7v voltage drop that accompanies the use
of the normal diode.

4. The zener diode default operational state is in the breakdown region (reversed biased).
It means it actually starts to work when the applied voltage is higher than Zener
Voltage in reverse biased.

5. The zener diode is mostly used in applications involving, voltage regulation, clipping
circuits and Voltage shifters.

References
1. https://www.digikey.in/en/maker/blogs/zener-diode-basic-operation-and-applications.

2. https://www.electronics-tutorials.ws/diode/diode_7.html

3. https://www.vedantu.com/physics/zener-diode

10