Wireless

NVR Kit User Manual

Enter the correct password, default password is blank. 6.4 Main menu
Note: Please modify the user password before using the product to protect your privacy.
Password modification: " Main menu → The system menu → User configuration →Edit button → Edit the user
menu → Enter the original password: (blank) →Check password → Set a new password → OK "to change user
passwords.
6.3 Right click menu
Click right mouse button, main menu pops up. Click right mouse button again, main menu disappears.
● Left click on the "main menu" to enter the main menu interface
● Left click on the "Single display" to enter the picture preview mode
POWER HDD REC
● Left click on the "multi display" to enter the four-screen preview mode
HD NVR
Wireless Smart Link
● Left click on the "channel setting" to enter the channel configuration screen
● Left click on the "playback" to enter the video playback interface
● Left click on the "system setting" to enter the system configuration interface
● Left click "Auto configure" to enter system automatically setting
1.Statement ● Left click on the "output adjust", you can adjust output video color
● Left click "Lock" automatically to exit the menu and screen locks
Thank you for purchasing our products. If you have any question, please contact us. ● Left click "Restart" to restart pending mode
This manual appliesto the wireless NVR kit. 6.4 Main menu
2.Product description Click main menu to enter the main menu interface, then users can access to any sub menu to configure the NVR.
This wireless NVR kit is a wireless solution specially for small surveillance systems.The NVR receives 6.5 Network
wireless Wi-Fi signal from IPC (network camera), stores and manages the video streams. The wireless Correct network setting is a precondition of the kit’s normal use. Network setting tips:
kit reduces the cost of installation and maintenance, increases aesthetics and utility in actual use. 1.NVR IP address cannot conflict with any other device in the same LAN.
It is a high-tech product while much more user-friendly. The powerful back-end HCMS and P2P mobile
2.When using P2P for mobile phone viewing, it is better to enable DHCP of the NVR.
Application make your security needs more convenient.
6.6 Recording
3.Attentions Users can set cameras recording plans. Users can optionally set timer recording on different channels.After setting
*Please check carefully if all items are included in the package. 1ch recording plan, users can copy setting plan to other channels.
*Please don’t make the kit fall to ground or be hit by strong forces. 6.7 Playback
*Please keep good ventilation environment around this kit. The dates which have recording files are marked red automatically. Users can choose the channel and click date
*Please avoid installing in severe vibration environments. to find the recording files, then choose from the red line to find exact recording files.
*Please avoid environment with much humidity, dust, extreme heat or extreme cold. 6.8 Backup
* Please make sure to turn off power of all items during installation. Check the voltage of the power supply carefully. Enter the “Backup” menu. Users can back up recording files by channel, recording time and recording types.
* Please contact the distributor or service center if the kit is damaged or not working properly. 6.9 Hard disk manager
4 . Packing list The NVR supports max 4T hard drive disk.
1:NVR *1pcs 4:DC 12V 2A Power supply (for NVR) *1pcs Users can find hard disk information and format the hard disk.
2:WiFi IP Camera*4pcs 5:DC 12V 1A Power supply (for IPC)*4pcs
3:Mouse*1pcs 6:Product user manual *1pcs 6.10 Channel
5.Product advantages Users can have channel setting, OSD setting, encode setting, motion detection setting here.
*2.4G WIFI video transmission, no need network cables; 6.11 System
*With smart link technology, WIFI IP cameras connect to NVR automatically, no settings needed; Users can set basic system information (language, video output resolution, time..), network information and user
*Plug and play; information here.
* Professional enhanced WIFI module ensures transmission open distance up to 100m, through wall
distance 30m, stable and reliable; 6.12 Maintenance
Users can check NVR version and logs, upgrade NVR from U disk , or restore default settings.
*Support Android/ IOS smart phone remote viewing;
*Low illumination image sensor has good day/night vision. Mobile phone APP installation
*WIFI IP cameras support 4ch motion detection;
*WIFI IP cameras support 4 privacy mask zones. It helps to avoid private zones;
*H.264 High profile video compression ensures less bandwidth and less pressure of
WIFI transmission channels, thus makes a more stable transmission.
6 . Use of the product
6.1 Open / Shutdown
Check the voltage of the power supply (DC12V) for NVR. After plug in the power supply,
the power indicator is lighting.Main menu → Shutdown , click on the shutdown button,
NVR is disconnected. Then unplug the power supply.
6.2 User login
After normal boot, click right mouse button, log-in menu pops up.
6.7 Playback 6.10 Channel
1 2
1.Installation of mobile phone APP
Search “GooLink” in Google Play or APP Store. Find the APP and install it. channels of this device, and show the channel icons under the device area.
Step 2: Tap the channel icon , the channel’s video will be connected.
2. Device management Repeat above steps to connect other channels of the device or another device.
2.1 Device list After the channel is selected, the channel circle icon’s color turns into bright-Blue like . Tap it again, the
Tap “ ” to spread out all the function buttons. Then tap “ ”, the device list will appears. channel video will stop and the channel circle icon color becomes grey.
2.2 Add device
Tap “ ” or “ ” to add a device.

2.2 Add device

Tips: You can tap and drag the window to swap any two displaying videos.
2.1 Device list
Instructions of how to add a device:
Button Descriptions 4、Function introduction
In addition, GooLink also supports screenshots, recording, local and remote video playback function. Users
Two-dimensional code scanning Two-dimensional code scanningScan can click on "help" to get a detailed description of the icon function.
Manual enter Fill in the device information manually
If the device is on the same local network with your phone, GooLink would
LAN Search find them automatically and let you add those devices easily

Notice:
1.The following causes to product failure are not covered by the warranty.
a. Accidents, negligence, disasters, improper operations;
b. Careless use of circumstances or conditions, such as wrong voltage, ambient temperature, strong lightning;
Entry Descriptions c. Repaired by non-authorized people;
d. Out of warranty period.
Any name that users like to identify this device. Please be noted 2. When product failure happens, please fill in the contact card and contact dealer or service center for help.
Name that the name should not duplicate with existing device’s name.
The device GID (if you are using the QR Code Scan/ Local Search method to add device, this Warranty Card
GID item will be filled automatically) User name: ____________________________________________
Address: ______________________________________________
User The device’s login name（user name is admin） Phone：__________________ Fax：_______________________
E-mail: ______________________________________________
Password The device’s login password（in according with NVR local password） Product Model: ________________________________________
Product S/N number: ____________________________________
Production date: ________Date_________ Month _________Year
Channel NumberSelect the channel number, when assign “auto”, the app will set the number automatically.
Order date: ________Date_________ Month _________Year

When you finish adding devices, they will show in the main interface view under the playing windows area. If you have other requests, please fill in the following:
If the device icon’s color is bright-Blue , it means the device is online. ______________________________________________________________________________________
3、Live view ____________________________________________________________________________
Step 1: Tap the device icon, GooLink will check out the

3 4