2/27/24, 2:54 PM CAD Vocab III - Crossword Labs
CAD Vocab III
1
4 5
8 9
10
11 12
13 14
15 16 17
18 19
20 21
22 23
24 25 26
27
28 29
30
31
32
Across Down
4. Sections used when a feature is out of alignment with the center 1. ____ Dimensioning- Several dimensions originate from a common
plane. surface, centerline, or center plane.
5. ____ Dimensioning- The dimension line that remains in the same 2. Notes that apply to the entire drawing.
location, with which other dimension lines align or spaced.
3. Objects that overlap in a drawing.
9. ____ Dimensioning- Used for reference purposes only.
6. A DWG, DWF, DWFx, raster image, DNG, or PDF file incorporated
13. ____ Dimensioning- One corner of an angle is located with a into a drawing for reference only. Also called an xref.
dimension and the angle is in degrees.
7. A file that contains standard drawing settings and objects for use in
14. Sections that show half the object removed. new drawings.
18. The line that cuts through the object to expose internal features. 8. The spacing, layout, and appearance of text.
19. The lengths of dashes and spaces in linetypes. 10. An imaginary plane parallel to the object
20. A block that provides space for the revision letter, a description of 11. Sections that show a small portion of the object removed.
the change, the date, and approvals
12. The assigned width of lines for display and plotting
22. The process of reviewing a drawing and marking required changes.
15. The 0 dimension, baseline, or common point from which all
24. ____ Dimensioning- All elements are linked to, or associated with, measurements are made while dimensioning.
the dimensioned object. The dimension updates automatically when
16. Many features have the same shape and size.
the associated object changes.
17. Section line symbols and graphic patterns.
26. The amount of gap allowed between segments of a boundary to be
hatched. 21. A line that connects a note or symbol to a specific feature or
location on a drawing.
28. Sections that show one quarter of the object removed.
29. The process of enlarging or reducing objects to fit properly on a 23. Letters, numbers, words, and notes used to describe information
on a drawing.
sheet of paper.
25. The area filled by a hatch.
31. ____ Dimensioning- Dimensions appear in a line from one feature
to the next. 27. ____ Dimensioning- Dimension values align with dimension lines.
32. ____ Dimensioning- without the use of geometric tolerancing 30. Removal of a portion of a long, constant-shaped object to make
the object fit better on the sheet.
https://crosswordlabs.com/view/cad-vocab-iii 1/1
