Question paper - science and technology part 1&2 ,std 10th

Science &Technology PRACTICAL Part -1

PRACTICAL NO. :1
**************************************************************
AIM: To identify the chloride , bromide and iodide ions from
the given salts.

APPARATUS: Test tubes, stand etc.

Chemicals : Silver Nitrate , solutions of Potassium Chloride ,

Potassium bromide and potassium Iodide.

Observations :
Test Chemical reaction Colour of Ion
tube precipitate
A
B
C

Inference / conclusion :

@8149166563Suhas vasant patil , RTMV

Question paper - science and technology part 1&2 ,std 10th

Science &Technology PRACTICAL Part -1

PRACTICAL NO. :2
**************************************************************
Aim : To identify the type of reaction by studying the reaction and
recording observations .
Apparatus: Beakers ,Test tubes , Pair of tongs, Burner , Glass rod , etc.
Chemicals: Zinc dust, Magnesium strip, Lead nitrate powder , dilute
Sulphuric Acid.
PART 1: Combustion of magnesium in air .
Reaction : --------------------------------------------------------------
Observations:
Reaction Number of Number of Interesting Types of
reactants product feature of reaction.
the reaction

PART 2: Action of dilute sulphuric acid on Zinc .

Reaction : ----------------------------------------------------------------------
Observations:
Reaction Number of Number of Interesting Types of
reactants product feature of reaction.
the reaction

PART 3: To heat Lead Nitrate .

Reaction : ----------------------------------------------------------------------
Observations:
Reaction Number of Number of Interesting Types of
reactants product feature of reaction.
the reaction

Inference / conclusion : PART 1:

PART 2:
PART 3:
@8149166563Suhas vasant patil , RTMV
Question paper - science and technology part 1&2 ,std 10th

Science &Technology PRACTICAL Part -1

PRACTICAL NO. :3
**************************************************************
Aim : To observe the following reactions and to classify them into the
types combination, displacement, decomposition and double
displacement.
Apparatus : 250ml beaker, china dish, asbestos sheet , dropper, hard
glass tube, test tube holder, burner, filter paper, etc.
Chemicals: calcium oxide , water, crystals of ferrous sulphate, iorn
nail, solution of copper sulphate.
Observations:
Part -1 : Reaction of water with slaked lime / calcium oxide.
Reaction: -------------------------------------------
Sr. no. Experimental procedure Observations
1 Note the heat absorbed or evolved during the reaction .
2 Note whether a gas or vapour is given away in the reaction.
3 Note the noise ,if ,any produced the reaction.
4 Note the change in the physical state.
Part -2 : Effect of heat on crystals of ferrous sulphate
Reaction: -------------------------------------------
Sr. no. Experimental procedure Observations
1 Note the original colour of ferrous sulphate.
2 Note the colour of the gas evolved on heating.
3 Note the noise ,if ,any produced the reaction.
Part -3 : Reaction of solution of copper sulphate with iron nail.
Reaction: -------------------------------------------
Sr. no.
Experimental procedure Observations
1 Colour of copper sulphate solution before experiments .
2 Colour of iorn nail before the experiments.
3 Colour of copper sulphate solution after the experiments .
4 Colour of iorn nail after the experiments.

Inference / conclusion :
PART 1:

PART 2:

PART 3:

@8149166563Suhas vasant patil , RTMV

Question paper - science and technology part 1&2 ,std 10th

Science &Technology PRACTICAL Part -1

PRACTICAL NO. :4
**************************************************************
AIM : To study the magnetic field due to electric current flowing
through the coil.
Apparatus: insulated copper wire (24 gauge) , connecting wires,
battery, cardboard sheet, iron fillings, etc.
Figure/circuit diagram:

Observations:
1. When the electric current starts flowing through the coil, ------ are
produced each point on the coil.
2. As we go away from the wire , the concentric circles representing
the magnetic lines forces will become-------------.
3. As --------- of electric current increases the magnetic lines of force
become more clearer.
Inference/ Conclusion :
1. If the current flows through the coil,------------ are produced at
each point on the coil.
2. In above experiment , the intensity of magnetic field at any point
by a current flowing through a coil , is dependent on the -----------
--------------------------------------------------------------.

@8149166563Suhas vasant patil , RTMV

Question paper - science and technology part 1&2 ,std 10th

Science &Technology PRACTICAL Part -1

PRACTICAL NO. :5
**************************************************************
Aim: To study the effect of heat on ice by using a graph .
Apparatus : glass beaker , ice , thermometer , stand, tripod, spirit
lamp, clock , Etc.
Oberavations:
Least count of thermometer= -------oc
Obervation table :
Time (min.) Temp. (oc) Time (min.) Temp (oc)
0 5
1 6
2 7
3 8
4 9

Graph : on graph paper

Temperature versus time

Inference/conclusion:

@8149166563Suhas vasant patil , RTMV

Question paper - science and technology part 1&2 ,std 10th

Science &Technology PRACTICAL Part -1

PRACTICAL NO. :6
**************************************************************
Aim: To measure temperature of hot water during natural cooling
and plot the graph of temperature versus time .
Apparatus : glass beaker, thermometer , stand, tripod, spirit lamp,
clock Etc.
Oberavations:
Initial temperature of water before heating= -------oc
Obervation table :
Time (min.) Temp. (oc) Time (min.) Temp (oc)
0 5
1 6
2 7
3 8
4 9

Graph : on graph paper

Temperature versus time

Inference/conclusion:
1. The rate of cooling of water is ----- when the difference in the
temperature of water and the ambience is large.
2. This rate -------- as the temperature of water reduces due to
cooling.

@8149166563Suhas vasant patil , RTMV

Question paper - science and technology part 1&2 ,std 10th

Science &Technology PRACTICAL Part -1

PRACTICAL NO. :7
**************************************************************
Aim : to verify the laws of refraction of light.
Apparatus : a glass slab , drawing board, drawing pins, paper pins,
drawing paper, etc.
Figure :

Obervations:
Sr. Angle of incidence Angle of refraction Angle of emergence
no. (i) (r) (e)
1 300
2 450
3 600

Inference / conclusion:
1. When light undergoes refraction through a glass slab , the -----
ray and -------- ray are parallel to each other.
2. The angle of incidence and the angle of emergence are of ------
measures .

@8149166563Suhas vasant patil , RTMV

Question paper - science and technology part 1&2 ,std 10th

Science &Technology PRACTICAL Part -1

PRACTICAL NO. :8
**************************************************************
Aim : to obtain the focal length of convex lens.
Apparatus : convex lens, lens holder, meter scale, screen with stand,etc.
Figure:

Observation :
Least count of the meter scale :---- mm.
Observation table:
A. Convex lens front surface facing the object.
No. Distant object Distance between lens center and screen

Average F1
B. Convex lens Back surface facing the object.
No. Distant object Distance between lens center and screen

Average F2
Inference/ conclusion :
1. First focal length of convex lens(F1) =---cm.
2. Second focal length of convex lens (F2) =-- cm.
3. From above, is the lens used in the experiment a symmetric lens ?
yes/no
If yes then lens is ---------- lens.
If no , then lens is --------- lens.

@8149166563Suhas vasant patil , RTMV